Development of New Method for Choosing Standard Components Subject to Minimal Cycle Time and Minimal Sum of Purchasing Cost

Author(s):  
Tan Nguyen Dang ◽  
Manh Cuong Nguyen
2012 ◽  
Vol 542-543 ◽  
pp. 320-323 ◽  
Author(s):  
Ling Zhao

The paper is focus on the assembly line of the factory .The nodular method and second-watch measuring methods are applied to measure the work time of the bottleneck stations. To improve the cycle time of the assembly line, the work contents of relative stations is reallocated. Finally, the production line is disposed again on the basis of the principle of ECRS and the line balancing theory .After implemented the new method, the capability of this production line has improved.


2013 ◽  
Vol 278-280 ◽  
pp. 1447-1450
Author(s):  
Dong Won Shin ◽  
Kyoung Seok Park

This paper presents the new method of generating the trajectory at every cycle using PVAJT data, where P means the position, V the velocity, A the acceleration, J the jerk, and T is the multiplied cycle time. This method reduces the calculation time in the trajectory planner so that it takes less time to generate more complex trajectory. Several path trajectories are realized by the PVAJT algorithm to show the performance of proposed method.


Author(s):  
Jonalyn Jaylo-Sia ◽  
Jonathan Pulido ◽  
Frederick Ray Gomez

Intermetallic coverage (IMC) is one of the critical wirebond output responses that is usually checked to ensure the ball to pad integrity. The success of wirebonding relies on the formation of an interfacial intermetallic growth of ball bond to ensure it can withstand reliability stresses. The challenging approach in IMC analysis detect as over-etching around IMC area that leads to inaccurate IMC data collection. To address the over-etching, we generate a new method which is backside polishing that results to a reliable IMC data collection and help reduced the cycle time of IMC data gathering.


Author(s):  
Forrest W Flocker ◽  
Ramiro H Bravo

Presented in this article are closed-form kinematic equations that give the minimum cycle time for multiple-dwell cam-follower systems subject to acceleration and jerk constraints set by the user. Cam-driven machines are used extensively in manufacturing because of their low cost, great precision and high production rates when compared with alternatives. Since they are frequently used in mass production operations, there is a need for minimizing their cycle time to increase manufacturing throughput and reduce capital costs for machines and facilities. Their widespread use means that there is the potential for significant improvement in overall manufacturing efficiency. The incorporation of acceleration and jerk limits in the kinematic formulation ensures minimal cycle time without compromising the operational limits of the manufacturing machines. The equations are given in a form suitable for spreadsheet or equation-solver programs, making it easy for the cam designer to generate an arbitrary number of data points for cam manufacturing. Multiple-dwell cams are particularly well suited for manufacturing operations; therefore, the intended audience of this paper is cam designers in the manufacturing sector.


Author(s):  
Krishna Kalyanam ◽  
Meir Pachter ◽  
David Casbeer

We are interested in the persistent surveillance of an area of interest comprised of stations/ data nodes that need to be visited in a cyclic manner. The data collection task is undertaken by a UAV which autonomously executes the mission. In addition to geographically distributed stations, the scenario also includes a central depot, where data collected from the different nodes must be delivered. In this context, the performance criteria, in addition to a desired minimal cycle time, also entails minimizing the delay in delivering the data collected from each node to the depot. Each node has a priority/ weight associated with it that characterizes the relative importance between timely delivery of data from the nodes. We pose the problem as an average/ cycle reward maximization problem; where the UAV gains a reward that is a decreasing function of weighted delay in data delivery from the nodes. Since we aim to maximize the average reward, the solution also favors shorter overall cycle time. In a cycle, each station is visited exactly once; however, we allow the UAV to visit the depot more than once in a cycle. Evidently, this allows for quicker delivery of data from a higher priority node. We apply results from average reward maximization stochastic dynamic programming to our deterministic case and solve the problem using Linear Programming. We also discuss the special case of no penalty on delivery delay, whence the problem collapses to the well known metric Traveling Salesman Problem.


Author(s):  
C. C. Clawson ◽  
L. W. Anderson ◽  
R. A. Good

Investigations which require electron microscope examination of a few specific areas of non-homogeneous tissues make random sampling of small blocks an inefficient and unrewarding procedure. Therefore, several investigators have devised methods which allow obtaining sample blocks for electron microscopy from region of tissue previously identified by light microscopy of present here techniques which make possible: 1) sampling tissue for electron microscopy from selected areas previously identified by light microscopy of relatively large pieces of tissue; 2) dehydration and embedding large numbers of individually identified blocks while keeping each one separate; 3) a new method of maintaining specific orientation of blocks during embedding; 4) special light microscopic staining or fluorescent procedures and electron microscopy on immediately adjacent small areas of tissue.


Sign in / Sign up

Export Citation Format

Share Document