scholarly journals Study of the Outer Self-regeneration of Turbulence in Wall Flows

Author(s):  
A. Cimarelli ◽  
Elisabetta De Angelis ◽  
A. Talamelli ◽  
C. M. Casciola
Keyword(s):  
2021 ◽  
Vol 6 (3) ◽  
Author(s):  
Rina Perven ◽  
Jimmy Philip ◽  
Joseph Klewicki

Author(s):  
Florian Herbst ◽  
Andreas Fiala ◽  
Joerg R. Seume

The current design of low-pressure turbines (LPTs) with steady-blowing vortex generating jets (VGJ) uses steady computational fluid dynamics (CFD). The present work aims to support this design approach by proposing a new semi-empirical transition model for injection-induced laminar-turbulent boundary layer transition. It is based on the detection of cross-flow vortices in the boundary layer which cause inflectional cross-flow velocity profiles. The model is implemented in the CFD code TRACE within the framework of the γ-Reθ transition model and is a reformulated, re-calibrated, and extended version of a previously presented model. It is extensively validated by means of VGJ as well as non-VGJ test cases capturing the local transition process in a physically reasonable way. Quantitative aerodynamic design parameters of several VGJ configurations including steady and periodic-unsteady inflow conditions are predicted in good accordance with experimental values. Furthermore, the quantitative prediction of end-wall flows of LPTs is improved by detecting typical secondary flow structures. For the first time, the newly derived model allows the quantitative design and optimization of LPTs with VGJs.


Author(s):  
Yoshiyuki Iso ◽  
Xi Chen

Gas-liquid two-phase flows on the wall like liquid film flows, which are the so-called wetted wall flows, are observed in many industrial processes such as absorption, desorption, distillation and others. For the optimum design of packed columns widely used in those kind of processes, the accurate predictions of the details on the wetted wall flow behavior in packing elements are important, especially in order to enhance the mass transfer between the gas and liquid and to prevent flooding and channeling of the liquid flow. The present study focused on the effects of the change of liquid flow rate and the wall surface texture treatments on the characteristics of wetted wall flows which have the drastic flow transition between the film flow and rivulet flow. In this paper, the three-dimensional gas-liquid two-phase flow simulation by using the volume of fluid (VOF) model is applied into wetted wall flows. Firstly, as one of new interesting findings in this paper, present results showed that the hysteresis of the flow transition between the film flow and rivulet flow arose against the increasing or decreasing stages of the liquid flow rate. It was supposed that this transition phenomenon depends on the history of flow pattern as the change of curvature of interphase surface which leads to the surface tension. Additionally, the applicability and accuracy of the present numerical simulation were validated by using the existing experimental and theoretical studies with smooth wall surface. Secondary, referring to the texture geometry used in an industrial packing element, the present simulations showed that surface texture treatments added on the wall can improve the prevention of liquid channeling and can increase the wetted area.


2021 ◽  
Vol 933 ◽  
Author(s):  
Xi Chen ◽  
Katepalli R. Sreenivasan

The dominant paradigm in turbulent wall flows is that the mean velocity near the wall, when scaled on wall variables, is independent of the friction Reynolds number $Re_\tau$ . This paradigm faces challenges when applied to fluctuations but has received serious attention only recently. Here, by extending our earlier work (Chen & Sreenivasan, J. Fluid Mech., vol. 908, 2021, p. R3) we present a promising perspective, and support it with data, that fluctuations displaying non-zero wall values, or near-wall peaks, are bounded for large values of $Re_\tau$ , owing to the natural constraint that the dissipation rate is bounded. Specifically, $\varPhi _\infty - \varPhi = C_\varPhi \,Re_\tau ^{-1/4},$ where $\varPhi$ represents the maximum value of any of the following quantities: energy dissipation rate, turbulent diffusion, fluctuations of pressure, streamwise and spanwise velocities, squares of vorticity components, and the wall values of pressure and shear stresses; the subscript $\infty$ denotes the bounded asymptotic value of $\varPhi$ , and the coefficient $C_\varPhi$ depends on $\varPhi$ but not on $Re_\tau$ . Moreover, there exists a scaling law for the maximum value in the wall-normal direction of high-order moments, of the form $\langle \varphi ^{2q}\rangle ^{{1}/{q}}_{max}= \alpha _q-\beta _q\,Re^{-1/4}_\tau$ , where $\varphi$ represents the streamwise or spanwise velocity fluctuation, and $\alpha _q$ and $\beta _q$ are independent of $Re_\tau$ . Excellent agreement with available data is observed. A stochastic process for which the random variable has the form just mentioned, referred to here as the ‘linear $q$ -norm Gaussian’, is proposed to explain the observed linear dependence of $\alpha _q$ on $q$ .


1979 ◽  
Vol 37 (6) ◽  
pp. 1415-1418
Author(s):  
V. A. Gorodtsov
Keyword(s):  

2005 ◽  
Vol 39 (5) ◽  
pp. 909-922 ◽  
Author(s):  
Sedat Tardu ◽  
Philippe Vezin
Keyword(s):  

2011 ◽  
Vol 50 (15) ◽  
pp. 8881-8891 ◽  
Author(s):  
Chiranth Srinivasan ◽  
Dimitrios V. Papavassiliou

Sign in / Sign up

Export Citation Format

Share Document