Conductive silver thick films filled with carbon nanotubes

2007 ◽  
pp. 360-364
Author(s):  
Marcin Sloma ◽  
Malgorzata Jakubowska ◽  
Anna Mlozniak ◽  
Ryszard Jezior
Keyword(s):  
Nano Letters ◽  
2017 ◽  
Vol 17 (9) ◽  
pp. 5641-5645 ◽  
Author(s):  
Kuan-Chang Chiu ◽  
Abram L. Falk ◽  
Po-Hsun Ho ◽  
Damon B. Farmer ◽  
George Tulevski ◽  
...  

2013 ◽  
Vol 3 (1) ◽  
Author(s):  
Sébastien Nanot ◽  
Aron W. Cummings ◽  
Cary L. Pint ◽  
Akira Ikeuchi ◽  
Takafumi Akiho ◽  
...  

Carbon ◽  
2011 ◽  
Vol 49 (11) ◽  
pp. 3544-3552 ◽  
Author(s):  
Yann Battie ◽  
Olivier Ducloux ◽  
Philippe Thobois ◽  
Nelly Dorval ◽  
Jean Sébastien Lauret ◽  
...  

2019 ◽  
Vol 54 (17) ◽  
pp. 2353-2363
Author(s):  
SH Mussavi Rizi ◽  
M Ghatee

This paper reports the effects of adding carbon nanotubes on the mechanical properties of zirconia-toughened alumina thick films prepared by tape casting. Polyvinylpyrrolidone, polyvinyl alcohol, and glycerin were used as dispersant, binder, and plasticizer, respectively. The microstructure and phase content of the samples were studied using scanning electron microscopy and X-ray diffraction methods, respectively. Mechanical properties of thick composite films were investigated by microhardness and nanoindentation methods. It was determined that polyvinylpyrrolidone can be used as a dispersant for carbon nanotube, alumina, and zirconia particles; tape casting can produce thick films with homogeneous phase distribution, and that adding up to 0.01 wt.% carbon nanotube enhanced the zirconia-toughened alumina hardness by more than 30%, and fracture toughness about 40%. Increasing carbon nanotube content over 0.01 wt.% up to 0.1 wt.% increases microhardness and nanohardness but does not affect fracture toughness significantly.


2013 ◽  
Vol 96 (4) ◽  
pp. 1113-1117 ◽  
Author(s):  
Oh Hyeon Kwon ◽  
Bhaskar Chandra Mohanty ◽  
Deuk Ho Yeon ◽  
Jong-Seok Yeo ◽  
Kyoungho Lee ◽  
...  

Author(s):  
Jun Jiao

HREM studies of the carbonaceous material deposited on the cathode of a Huffman-Krätschmer arc reactor have shown a rich variety of multiple-walled nano-clusters of different shapes and forms. The preparation of the samples, as well as the variety of cluster shapes, including triangular, rhombohedral and pentagonal projections, are described elsewhere.The close registry imposed on the nanotubes, focuses attention on the cluster growth mechanism. The strict parallelism in the graphitic separation of the tube walls is maintained through changes of form and size, often leading to 180° turns, and accommodating neighboring clusters and defects. Iijima et. al. have proposed a growth scheme in terms of pentagonal and heptagonal defects and their combinations in a hexagonal graphitic matrix, the first bending the surface inward, and the second outward. We report here HREM observations that support Iijima’s suggestions, and add some new features that refine the interpretation of the growth mechanism. The structural elements of our observations are briefly summarized in the following four micrographs, taken in a Hitachi H-8100 TEM operating at an accelerating voltage of 200 kV and with a point-to-point resolution of 0.20 nm.


Sign in / Sign up

Export Citation Format

Share Document