Technical-Economic Analysis of an Innovative Small Scale Solar Thermal - ORC Cogenerative System

Author(s):  
Mauro Villarini ◽  
Enrico Bocci ◽  
Andrea Di Carlo ◽  
Danilo Sbordone ◽  
Maria Carmen Falvo ◽  
...  
2021 ◽  
Vol 11 (9) ◽  
pp. 4100
Author(s):  
Rasa Supankanok ◽  
Sukanpirom Sriwong ◽  
Phisan Ponpo ◽  
Wei Wu ◽  
Walairat Chandra-ambhorn ◽  
...  

Evacuated-tube solar collector (ETSC) is developed to achieve high heating medium temperature. Heat transfer fluid contained inside a copper heat pipe directly affects the heating medium temperature. A 10 mol% of ethylene-glycol in water is the heat transfer fluid in this system. The purpose of this study is to modify inner structure of the evacuated tube for promoting heat transfer through aluminum fin to the copper heat pipe by inserting stainless-steel scrubbers in the evacuated tube to increase heat conduction surface area. The experiment is set up to measure the temperature of heat transfer fluid at a heat pipe tip which is a heat exchange area between heat transfer fluid and heating medium. The vapor/ liquid equilibrium (VLE) theory is applied to investigate phase change behavior of the heat transfer fluid. Mathematical model validated with 6 experimental results is set up to investigate the performance of ETSC system and evaluate the feasibility of applying the modified ETSC in small-scale industries. The results indicate that the average temperature of heat transfer fluid in a modified tube increased to 160.32 °C which is higher than a standard tube by approximately 22 °C leading to the increase in its efficiency by 34.96%.


2021 ◽  
Vol 9 (4) ◽  
pp. 1969-1969
Author(s):  
Bosong Lin ◽  
Theodore Wiesner ◽  
Mahdi Malmali

Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4292
Author(s):  
Lidia Lombardi ◽  
Barbara Mendecka ◽  
Simone Fabrizi

Industrial anaerobic digestion requires low temperature thermal energy to heat the feedstock and maintain temperature conditions inside the reactor. In some cases, the thermal requirements are satisfied by burning part of the produced biogas in devoted boilers. However, part of the biogas can be saved by integrating thermal solar energy into the anaerobic digestion plant. We study the possibility of integrating solar thermal energy in biowaste mesophilic/thermophilic anaerobic digestion, with the aim of reducing the amount of biogas burnt for internal heating and increasing the amount of biogas, further upgraded to biomethane and injected into the natural gas grid. With respect to previously available studies that evaluated the possibility of integrating solar thermal energy in anaerobic digestion, we introduce the topic of economic sustainability by performing a preliminary and simplified economic analysis of the solar system, based only on the additional costs/revenues. The case of Italian economic incentives for biomethane injection into the natural gas grid—that are particularly favourable—is considered as reference case. The amount of saved biogas/biomethane, on an annual basis, is about 4–55% of the heat required by the gas boiler in the base case, without solar integration, depending on the different considered variables (mesophilic/thermophilic, solar field area, storage time, latitude, type of collector). Results of the economic analysis show that the economic sustainability can be reached only for some of the analysed conditions, using the less expensive collector, even if its efficiency allows lower biomethane savings. Future reduction of solar collector costs might improve the economic feasibility. However, when the payback time is calculated, excluding the Italian incentives and considering selling the biomethane at the natural gas price, its value is always higher than 10 years. Therefore, incentives mechanism is of great importance to support the economic sustainability of solar integration in biowaste anaerobic digestion producing biomethane.


Author(s):  
E. Ogbonnaya ◽  
L. Weiss

Increasing focus on alternative energy sources has produced significant progress across a wide variety of research areas. One particular area of interest has been solar energy. This has been true on both large and small-scale applications. Research in this paper presents investigations into a small-scale solar thermal collector. This approach is divergent from traditional micro solar photovoltaic devices, relying on transforming incoming solar energy to heat for use by devices like thermoelectrics. The Solar Thermal Collector (STC) is constructed using a copper collector plate with electroplated tin-nickel selective coating atop the collector surface. Further, a unique top piece is added to trap thermal energy and reduce convective, conductive, and radiative losses to the surrounding environment. Results show a capture efficiency of 92% for a collector plate alone when exposed to a 1000 W/m2 simulated solar source. The addition of the top “glazing” piece improves capture efficiency to 97%. Future work will integrate these unique devices with thermoelectric generators for electric power production. This will yield a fully autonomous system, capable of powering small sensors or other devices in remote locations or supplementing existing devices with renewable energy.


2008 ◽  
Author(s):  
Q. S. Yin ◽  
H. Y. Li ◽  
Q. H. Fan ◽  
L. X. Jia ◽  
J. G. Weisend ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document