Geometry of General Hypersurfaces, Constraint Equations and Applications to Shells

2013 ◽  
pp. 67-83
Author(s):  
Marc Mars
Keyword(s):  
Constraint Equations

Integrated Kinematic Calibration for All the Parameters of a Planar 2DOF Redundantly Actuated Parallel Manipulator

2009 ◽  
Vol 1 (3) ◽  
Author(s):  
Chunshi Feng ◽  
Shuang Cong ◽  
Weiwei Shang
Keyword(s):  
Parallel Manipulator ◽  
Closed Loop ◽  
Open Loop ◽  
Kinematic Calibration ◽  
Constraint Equations ◽  
Integrated Method ◽  
Uniqueness Of The Solution ◽  
Redundantly Actuated ◽  
Loop Constraint ◽  
Two Degree Of Freedom

In this paper, the kinematic calibration of a planar two-degree-of-freedom redundantly actuated parallel manipulator is studied without any assumption on parameters. A cost function based on closed-loop constraint equations is first formulated. Using plane geometry theory, we analyze the pose transformations that bring infinite solutions and present a kinematic calibration integrated of closed-loop and open-loop methods. In the integrated method, the closed-loop calibration solves all the solutions that fit the constraint equations, and the open-loop calibration guarantees the uniqueness of the solution. In the experiments, differential evolution is applied to compute the solution set, for its advantages in computing multi-optima. Experimental results show that all the parameters involved are calibrated with high accuracy.

Systematic Construction of the Equations of Motion for Multibody Systems Containing Closed Kinematic Loops

1989 ◽  
Author(s):  
P. E. Nikravesh ◽  
G. Gim
Keyword(s):  
Equations Of Motion ◽  
Transformation Matrix ◽  
Velocity Transformation ◽  
Constraint Equations ◽  
Advantages And Disadvantages ◽  
Lagrange Multiplier Technique ◽  
Joint Coordinates ◽  
Minimum Number ◽  
Kinematic Loops ◽  
Equations Of Motions

Abstract This paper presents a systematic method for deriving the minimum number of equations of motion for multibody system containing closed kinematic loops. A set of joint or natural coordinates is used to describe the configuration of the system. The constraint equations associated with the closed kinematic loops are found systematically in terms of the joint coordinates. These constraints and their corresponding elements are constructed from known block matrices representing different kinematic joints. The Jacobian matrix associated with these constraints is further used to find a velocity transformation matrix. The equations of motions are initially written in terms of the dependent joint coordinates using the Lagrange multiplier technique. Then the velocity transformation matrix is used to derive a minimum number of equations of motion in terms of a set of independent joint coordinates. An illustrative example and numerical results are presented, and the advantages and disadvantages of the method are discussed.

Efficient Dynamic Analysis Method for Multibody Systems With Constraint Violation Stabilization Method

1999 ◽  
Author(s):  
Apiwat Reungwetwattana ◽  
Shigeki Toyama
Keyword(s):  
Dynamic Analysis ◽  
Multibody Systems ◽  
Analysis Method ◽  
Stabilization Method ◽  
Kinematic Constraint ◽  
Constraint Violation ◽  
Closed Loops ◽  
Constraint Stabilization ◽  
Constraint Equations ◽  
Crank Mechanism

Abstract This paper presents an efficient extension of Rosenthal’s order-n algorithm for multibody systems containing closed loops. Closed topological loops are handled by cut joint technique. Violation of the kinematic constraint equations of cut joints is corrected by Baumgarte’s constraint violation stabilization method. A reliable approach for selecting the parameters used in the constraint stabilization method is proposed. Dynamic analysis of a slider crank mechanism is carried out to demonstrate efficiency of the proposed method.

Kinematic Fixturing With Respect to a Plane Using Contact Sensing

1998 ◽  
Author(s):  
Walter W. Nederbragt ◽  
Bahram Ravani
Keyword(s):  
Spatial Constraint ◽  
Spatial Constraints ◽  
Constraint Equations ◽  
Contact Sensing ◽  
Geometric Elements ◽  
Work Cells

Abstract This paper presents a method for determining the location of geometric elements that compose the external features of referencing fixtures. Since in most applications parts that are handled in robotic work-cells are on a worktable or a floor, this paper focuses on fixture geometries that reside on a plane of known location. The location of the unknown geometric elements are found using contacts to the geometric elements and spatial constraints between the geometric elements. Geometric equations for contacts between lines, planes, points, spheres, and cylinders are derived. Spatial constraint equations are also derived. An algorithm is given for locating the geometric elements that form the fixture. The algorithm uses the contact equations and spatial constraint equations to locate the geometric elements. To illustrate the use of this algorithm, two examples are described in detail.

Reconfiguration and Unified Kinematics Analysis of a Metamorphic Parallel Mechanism With Bifurcated Motion

2012 ◽  
Author(s):  
Dongming Gan ◽  
Jian S. Dai ◽  
Lakmal D. Seneviratne
Keyword(s):  
Parallel Mechanism ◽  
Geometric Condition ◽  
Translation Vector ◽  
Kinematics Analysis ◽  
Constraint Equations ◽  
Mechanism Modeling ◽  
The Difference ◽  
Two Phases ◽  
Set Up ◽  
Joint Center

This paper introduced a new metamorphic parallel mechanism consisting of four reconfigurable rTPS limbs. Based on the reconfigurability of the reconfigurable Hooke (rT) joint, the rTPS limb has two phases while in one phase the limb has no constraint to the platform, in the other it constrains the spherical joint center to lie on a plane. This results in the mechanism to have ability of reconfiguration between different topologies with variable mobility. Geometric constraint equations of the platform rotation matrix and translation vector are set up based on the point-plane constraint, which reveals the bifurcated motion property in the topology with mobility 2 and the geometric condition with mobility change in altering to other mechanism topologies. Following this, a unified kinematics limb modeling is proposed considering the difference between the two phases of the reconfigurable rTPS limb. This is further applied for the mechanism modeling and both the inverse and forward kinematics is analytically solved by combining phases of the four limbs covering all the mechanism topologies.

SOLVING SPATIAL CONSTRAINTS WITH GLOBAL DISTANCE COORDINATE SYSTEM

2006 ◽  
Vol 16 (05n06) ◽  
pp. 533-547 ◽  
Author(s):  
LU YANG
Keyword(s):  
Coordinate System ◽  
Systematic Approach ◽  
Distance Geometry ◽  
Spatial Constraints ◽  
Constraint Equations ◽  
System A ◽  
Short Program ◽  
Complete Set ◽  
Point Line ◽  
Made In

A systematic approach making use of distance geometry to solve spatial constraints is introduced. We demonstrate how to create the constraint equations by means of a relevant distance coordinate system. A short program is made (in Maple) which implements the algorithm producing automatically a complete set of constraint equations for a given point-plane configuration. The point-line-plane configurations are converted into point-plane ones beforehand.

Sign in / Sign up

Export Citation Format

Share Document