Ultrasonic Multitransducer Input Signal Analysis

1982 ◽  
pp. 176-186
Author(s):  
M. Berson ◽  
A. Roncin ◽  
D. Besse ◽  
Cl. Pejot ◽  
L. Pourcelot
Keyword(s):  
Input Signal ◽  
Signal Analysis

A Fault Detection Approach Based on Sound Signal Analysis for Equipment Monitoring

2020 ◽  
pp. 129-139
Author(s):  
Weihai Sun ◽  
Lemei Han
Keyword(s):  
Fault Detection ◽  
Signal Analysis ◽  
Energy Analysis ◽  
Detection Method ◽  
Sound Signal ◽  
Practical Significance ◽  
Time Frequency ◽  
Detection Approach ◽  
Machine Fault ◽  
Learning Data

Machine fault detection has great practical significance. Compared with the detection method that requires external sensors, the detection of machine fault by sound signal does not need to destroy its structure. The current popular audio-based fault detection often needs a lot of learning data and complex learning process, and needs the support of known fault database. The fault detection method based on audio proposed in this paper only needs to ensure that the machine works normally in the first second. Through the correlation coefficient calculation, energy analysis, EMD and other methods to carry out time-frequency analysis of the subsequent collected sound signals, we can detect whether the machine has fault.

Input Signal Voltage Variation and its Effects on Non Invasive Bio-impedance Diagnosis

2011 ◽  
Vol 4 (2) ◽  
pp. 13-14
Author(s):  
Hari Krishnan G Hari Krishnan G ◽  
◽  
Dr. Ananda Natarajan R ◽  
Dr. Anima Nanda
Keyword(s):  
Input Signal ◽  
Non Invasive ◽  
Voltage Variation

THE REALIZATION OF THE ITERATIVE METHOD OF THE LEAST SQUARES FOR THE ESTIMATION OF STATIC OBJECT PARAMETERS IN MATLAB ENVIRONMENT

2017 ◽  
pp. 28-36
Author(s):  
Galina Vasil’evna Troshina ◽  
Alexander Aleksandrovich Voevoda
Keyword(s):  
Parameter Estimation ◽  
Iterative Method ◽  
Least Squares ◽  
Input Signal ◽  
Layer Structure ◽  
Estimation Procedure ◽  
Parameter Estimation Procedure ◽  
Noise Simulation ◽  
Static Object ◽  
Object Parameters

It was suggested to use the system model working in real time for an iterative method of the parameter estimation. It gives the chance to select a suitable input signal, and also to carry out the setup of the object parameters. The object modeling for a case when the system isn't affected by the measurement noises, and also for a case when an object is under the gaussian noise was executed in the MatLab environment. The superposition of two meanders with different periods and single amplitude is used as an input signal. The model represents the three-layer structure in the MatLab environment. On the most upper layer there are units corresponding to the simulation of an input signal, directly the object, the unit of the noise simulation and the unit for the parameter estimation. The second and the third layers correspond to the simulation of the iterative method of the least squares. The diagrams of the input and the output signals in the absence of noise and in the presence of noise are shown. The results of parameter estimation of a static object are given. According to the results of modeling, the algorithm works well even in the presence of significant measurement noise. To verify the correctness of the work of an algorithm the auxiliary computations have been performed and the diagrams of the gain behavior amount which is used in the parameter estimation procedure have been constructed. The entry conditions which are necessary for the work of an iterative method of the least squares are specified. The understanding of this algorithm functioning principles is a basis for its subsequent use for the parameter estimation of the multi-channel dynamic objects.

Diagnostic System of Gravitational Solid Flow Based on Weight and Accelerometer Signal Analysis Using Wireless Data Transmission Technology

2012 ◽  
Vol 17 (4) ◽  
pp. 319-326 ◽  
Author(s):  
Zbigniew Chaniecki ◽  
Krzysztof Grudzień ◽  
Tomasz Jaworski ◽  
Grzegorz Rybak ◽  
Andrzej Romanowski ◽  
...  
Keyword(s):  
Signal Analysis ◽  
Scale Up ◽  
Three Dimensional ◽  
Diagnostic System ◽  
Wireless Data ◽  
Stick Slip ◽  
Wireless Data Transmission ◽  
Accelerometer Signal ◽  
Flow Investigation ◽  
Material Information

Abstract The paper presents results of the scale-up silo flow investigation in based on accelerometer signal analysis and Wi-Fi transmission, performed in distributed laboratory environment. Prepared, by the authors, a set of 8 accelerometers allows to measure a three-dimensional acceleration vector. The accelerometers were located outside silo, on its perimeter. The accelerometers signal changes allowed to analyze dynamic behavior of solid (vibrations/pulsations) at silo wall during discharging process. These dynamic effects are caused by stick-slip friction between the wall and the granular material. Information about the material pulsations and vibrations is crucial for monitoring the interaction between silo construction and particle during flow. Additionally such spatial position of accelerometers sensor allowed to collect information about nonsymmetrical flow inside silo.

Sign in / Sign up

Export Citation Format

Share Document