Mitigate Climate Change and Use Processed or Value-Added Harvested Wood Products

Author(s):  
Sumit Chakravarty ◽  
Anju Puri ◽  
Nazir A. Pala ◽  
Gopal Shukla
2020 ◽  
Vol 12 (6) ◽  
pp. 2510
Author(s):  
Hubert Paluš ◽  
Ján Parobek ◽  
Martin Moravčík ◽  
Miroslav Kovalčík ◽  
Michal Dzian ◽  
...  

The forestry and forest-based sector play a significant role in climate change mitigation strategies and can contribute to the achievement of a climate-neutral economy. In this context, the ability of harvested wood products (HWP) to sequester carbon is of significant importance. The objective of this work is to make a projection of climate change mitigation potential of HWP, under different scenarios of wood utilization in Slovakia. This study builds on the comparison of different scenarios of industrial wood utilization till 2035 and presents the resulting impacts on the national carbon balance. The results suggest that the development of timber supplies after 2020 in Slovakia will be influenced, in particular, by the future changes in the age distribution and tree species composition as well as the extent of future accidental felling. Consequently, a predicted structure and availability of wood resources in Slovakia will be reflected in a higher share of the production of products with shorter life cycle and thus will negatively affect the carbon pool in HWP. By comparing the results of the four designed scenarios, it follows that the scenario with the greatest mitigation potential, is the one assuming the optimal use of wood assortments and limitation of industrial roundwood foreign trade.


2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Chihiro Kayo ◽  
Gerald Kalt ◽  
Yuko Tsunetsugu ◽  
Seiji Hashimoto ◽  
Hirotaka Komata ◽  
...  

Abstract Background The stock dynamics of harvested wood products (HWPs) are a relevant component of anthropogenic carbon cycles. Generally, HWP stock increases are treated as carbon removals from the atmosphere, while stock decreases are considered emissions. Among the different approaches suggested by the Intergovernmental Panel on Climate Change (IPCC) for accounting HWPs in national greenhouse gas inventories, the production approach has been established as the common approach under the Kyoto Protocol and Paris Agreement. However, the 24th session of the Conference of the Parties to the United Nations Framework Convention on Climate Change decided that alternative approaches can also be used. The IPCC has published guidelines for estimating HWP carbon stocks and default parameters for the various approaches in the 2006 Guidelines, 2013 Guidance, and 2019 Refinement. Although there are significant differences among the default methods in the three IPCC guidelines, no studies have systematically quantified or compared the results from the different guidelines on a global scale. This study quantifies the HWP stock dynamics and corresponding carbon removals/emissions under each approach based on the default methods presented in each guideline for 235 individual countries/regions. Results We identified relatively good consistency in carbon stocks/removals between the stock-change and the atmospheric flow approaches at a global level. Under both approaches, the methodological and parameter updates in the 2019 Refinement (e.g., considered HWPs, starting year for carbon stocks, and conversion factors) resulted in one-third reduction in carbon removals compared to the 2006 Guidelines. The production approach leads to a systematic underestimation of global carbon stocks and removals because it confines accounting to products derived from domestic harvests and uses the share of domestic feedstock for accounting. The 2013 Guidance and the 2019 Refinement reduce the estimated global carbon removals under the production approach by 15% and 45% (2018), respectively, compared to the 2006 Guidelines. Conclusions Gradual refinements in the IPCC default methods have a considerably higher impact on global estimates of HWP carbon stocks and removals than the differences in accounting approaches. The methodological improvements in the 2019 Refinement halve the global HWP carbon removals estimated in the former version, the 2006 Guidelines.


2008 ◽  
Vol 159 (9) ◽  
pp. 288-295 ◽  
Author(s):  
Peter Hofer ◽  
Ruedi Taverna ◽  
Frank Werner

The greenhouse gas effect can be mitigated by using wood in wood products and as an energy source. The effects of different wood use scenarios over more than 100 years can be demonstrated simulating associated wood flows and changes in wood stocks. The following recommendations have been developed on the basis of such models in order to optimize the contribution of the forestry and timber sector to mitigate climate change: 1) the maximum possible sustainable increment should be generated in the forest; 2) this increment should be harvested continuously; 3) the harvested wood should be processed in accordance with the principle of cascade use; 4) waste wood that is not suitable for further use should be used to generate energy.


Author(s):  
L. Valsta ◽  
B. Lippke ◽  
J. Perez-Garcia ◽  
K. Pingoud ◽  
J. Pohjola ◽  
...  

2018 ◽  
Vol 115 (14) ◽  
pp. 3663-3668 ◽  
Author(s):  
Beverly E. Law ◽  
Tara W. Hudiburg ◽  
Logan T. Berner ◽  
Jeffrey J. Kent ◽  
Polly C. Buotte ◽  
...  

Strategies to mitigate carbon dioxide emissions through forestry activities have been proposed, but ecosystem process-based integration of climate change, enhanced CO2, disturbance from fire, and management actions at regional scales are extremely limited. Here, we examine the relative merits of afforestation, reforestation, management changes, and harvest residue bioenergy use in the Pacific Northwest. This region represents some of the highest carbon density forests in the world, which can store carbon in trees for 800 y or more. Oregon’s net ecosystem carbon balance (NECB) was equivalent to 72% of total emissions in 2011–2015. By 2100, simulations show increased net carbon uptake with little change in wildfires. Reforestation, afforestation, lengthened harvest cycles on private lands, and restricting harvest on public lands increase NECB 56% by 2100, with the latter two actions contributing the most. Resultant cobenefits included water availability and biodiversity, primarily from increased forest area, age, and species diversity. Converting 127,000 ha of irrigated grass crops to native forests could decrease irrigation demand by 233 billion m3⋅y−1. Utilizing harvest residues for bioenergy production instead of leaving them in forests to decompose increased emissions in the short-term (50 y), reducing mitigation effectiveness. Increasing forest carbon on public lands reduced emissions compared with storage in wood products because the residence time is more than twice that of wood products. Hence, temperate forests with high carbon densities and lower vulnerability to mortality have substantial potential for reducing forest sector emissions. Our analysis framework provides a template for assessments in other temperate regions.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Tanja Myllyviita ◽  
Sampo Soimakallio ◽  
Jáchym Judl ◽  
Jyri Seppälä

Abstract Background Replacing non-renewable materials and energy with wood offers a potential strategy to mitigate climate change if the net emissions of ecosystem and technosystem are reduced in a considered time period. Displacement factors (DFs) describe an emission reduction for a wood-based product or fuel which is used in place of a non-wood alternative. The aims of this review were to map and assess DFs from scientific literature and to provide findings on how to harmonise practices behind them and to support coherent application. Results Most of the reviewed DFs were positive, implying decreasing fossil GHG emissions in the technosystem. The vast majority of the reviewed DFs describe avoided fossil emissions either both in processing and use of wood or only in the latter when wood processing emissions were considered separately. Some of the reviewed DFs included emissions avoided in post-use of harvested wood products (HWPs). Changes in forest and product carbon stocks were not included in DFs except in a few single cases. However, in most of the reviewed studies they were considered separately in a consistent way along with DFs. DFs for wood energy, construction and material substitution were widely available, whereas DFs for packaging products, chemicals and textiles were scarce. More than half of DFs were calculated by the authors of the reviewed articles while the rest of them were adopted from other articles. Conclusions Most of the reviewed DFs describe the avoided fossil GHG emissions. These DFs may provide insights on the wood-based products with a potential to replace emissions intensive alternatives but they do not reveal the actual climate change mitigation effects of wood use. The way DFs should be applied and interpreted depends on what has been included in them. If the aim of DFs is to describe the overall climate effects of wood use, DFs should include all the relevant GHG flows, including changes in forest and HWP carbon stock and post-use of HWPs, however, based on this literature review this is not a common practice. DFs including only fossil emissions should be applied together with a coherent assessment of changes in forest and HWP carbon stocks, as was the case in most of the reviewed studies. To increase robustness and transparency and to decrease misuse, we recommend that system boundaries and other assumptions behind DFs should be clearly documented.


2021 ◽  
Author(s):  
Hongmei Gu ◽  
Prakash Nepal ◽  
Matthew Arvanitis ◽  
Delton Alderman

Buildings and the construction sector together account for about 39% of the global energy-related CO2 emissions. Recent building designs are introducing promising new mass timber products that have the capacity to partially replace concrete and steel in traditional buildings. The inherently lower environmental impacts of engineered wood products for construction are seen as one of the key strategies to mitigate climate change through their increased use in the construction sector. This chapter synthesizes the estimated carbon benefits of using engineered wood products and mass timber in the construction sector based on insights obtained from recent Life Cycle Assessment studies in the topic area of reduced carbon emissions and carbon sequestration/storage.


Author(s):  
Luyang Zhang ◽  
Yankun Sun ◽  
Tianyuan Song ◽  
Jiaqi Xu

The use of harvested wood products (HWPs) influences the carbon flux. China is both the major producer and trader of HWP, so estimating the carbon stock change of China’s HWP is important to help curb climate change. Accurate reporting and accounting of carbon flows in the HWP pool is needed to meet greenhouse gas monitoring and climate change mitigation objectives under the United Nations Framework Convention on Climate Change (UNFCCC) and the Paris Agreement. This study applied production approach (PA) to estimate the carbon stock change of China’s HWP from 1900 to 2016. During the estimating period, the carbon stock of HWP in use and deposed at solid waste disposal sites (SWDS) were 649.2 Teragrams Carbon (TgC) (346.8 TgC in wood-based panels, 216.7 TgC in sawnwood and 85.7 TgC in paper & paperboard) and 72.6 TgC, respectively. The carbon amount of annual domestic harvest HWP varied between 87.6 and 118.7 TgC. However, the imported carbon inflow increased significantly after the 1990s and reached 47.6 TgC in 2016, accounting for 46% of the domestic harvest of that year. China has great mitigation potential from HWP and use of this resource should be considered in future strategies to address climate change.


Sign in / Sign up

Export Citation Format

Share Document