INDAVER N.V. — A New Industrial Waste Treatment Plant in Belgium

1987 ◽  
pp. 610-613
Author(s):  
L. M. J. Sterckx
2021 ◽  
Vol 47 (2) ◽  
pp. 36-43
Author(s):  
Koichi Shinohara ◽  
Daisuke Kono ◽  
Masayoshi Minakami ◽  
Tatsuya Kawajiri ◽  
Shuji Hironaka ◽  
...  

2001 ◽  
Vol 2001 (10) ◽  
pp. 1-10
Author(s):  
George M. Wong-Chong ◽  
Thomas Wildoner ◽  
Robert Laskey ◽  
Paul Brezovec ◽  
Michael Catalano

2019 ◽  
Vol 23 (3 Part B) ◽  
pp. 1957-1967
Author(s):  
Ana Lukovic ◽  
Goran Petrovic ◽  
Zarko Jankovic ◽  
Srdjan Glisovic

One of the objectives of industrial waste management is to reduce the amount of waste and to ensure its reuse in a way that allows notable improvement of resource efficiency. Location of a waste treatment plant is a strategic issue that require careful logistics system planning. The aim of this article is to create a model for solving the locationallocation problem of waste (i..e. secondary raw materials) treatment facilities, taking into account the territorial distribution, the type, and the quantity of secondary raw materials, the distance between waste-generating industries, as well as the CO 2 emissions from transport of secondary raw materials. The basic principle for defining a mathematical model is minimization of CO emissions from transport-related activities; 2 for this reason, modeling is based on the p median model that has been modified and put within the context of industrial waste management, including CO emissions from 2 transport. The location model is based on common industrial waste streams and CO 2 emissions from vehicles commonly used to transport secondary raw materials from generators to facilities. The verification of the model was performed through a case study that included the region of southeast Serbia. It confirmed usefullness of the proposed model for deciding on optimal locations for new industrial waste treatment plants.


2018 ◽  
Vol 2 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Tee L. Guidotti

On 16 October 1996, a malfunction at the Swan Hills Special Waste Treatment Center (SHSWTC) in Alberta, Canada, released an undetermined quantity of persistent organic pollutants (POPs) into the atmosphere, including polychlorinated biphenyls, dioxins, and furans. The circumstances of exposure are detailed in Part 1, Background and Policy Issues. An ecologically based, staged health risk assessment was conducted in two parts with two levels of government as sponsors. The first, called the Swan Hills Study, is described in Part 2. A subsequent evaluation, described here in Part 3, was undertaken by Health Canada and focused exclusively on Aboriginal residents in three communities living near the lake, downwind, and downstream of the SHSWTC of the area. It was designed to isolate effects on members living a more traditional Aboriginal lifestyle. Aboriginal communities place great cultural emphasis on access to traditional lands and derive both cultural and health benefits from “country foods” such as venison (deer meat) and local fish. The suspicion of contamination of traditional lands and the food supply made risk management exceptionally difficult in this situation. The conclusion of both the Swan Hills and Lesser Slave Lake studies was that although POPs had entered the ecosystem, no effect could be demonstrated on human exposure or health outcome attributable to the incident. However, the value of this case study is in the detail of the process, not the ultimate dimensions of risk. The findings of the Lesser Slave Lake Study have not been published previously and are incomplete.


1988 ◽  
Vol 20 (11-12) ◽  
pp. 131-136 ◽  
Author(s):  
A. D. Wong ◽  
C. D. Goldsmith

The effect of discharging specific oil degrading bacteria from a chemostat to a refinery activated sludge process was determined biokinetically. Plant data for the kinetic evaluation of the waste treatment plant was collected before and during treatment. During treatment, the 500 gallon chemostatic growth chamber was operated on an eight hour hydraulic retention time, at a neutral pH, and was fed a mixture of refinery wastewater and simple sugars. The biokinetic constants k (days−1), Ks (mg/L), and K (L/mg-day) were determined before and after treatment by Monod and Lineweaver-Burk plots. Solids discharged and effluent organic concentrations were also evaluated against the mean cell retention time (MCRT). The maximum utilization rate, k, was found to increase from 0.47 to 0.95 days−1 during the operation of the chemostat. Subsequently, Ks increased from 141 to 556 mg/L. Effluent solids were shown to increase slightly with treatment. However, this was acceptable due to the polishing pond and the benefit of increased ability to accept shock loads of oily wastewater. The reason for the increased suspended solids in the effluent was most likely due to the continual addition of bacteria in exponential growth that were capable of responding to excess substrate. The effect of the chemostatic addition of specific microbial inocula to the refinery waste treatment plant has been to improve the overall organic removal capacity along with subsequent gains in plant stability.


1994 ◽  
Vol 29 (8) ◽  
pp. 235-250 ◽  
Author(s):  
Norbert Amsoneit

As a rule, hazardous waste needs a pre-treatment, either a thermal or a chemical-physical one, before it can be disposed of at a landfill. The concentration of different kinds of treatment facilities at a Centralized Hazardous Waste Treatment Plant is advantageous. The facility of the ZVSMM at Schwabach is presented as an outstanding example of this kind of Treatment Centre. The infrastructure, the chemical-physical plant with separate lines for the treatment of organic and inorganic waste and the hazardous waste incinerator are described. Their functions are discussed in detail. Emphasis is laid on handling the residues produced by the different treatment processes and the final disposal.


Sign in / Sign up

Export Citation Format

Share Document