A Comparative Study of Numerical Methods for Cyclic Voltammetry Digital Simulation of an Electrochemical Process with a Coupled Chemical Reaction

Author(s):  
M. Amélia ◽  
N. D. A. Lemos ◽  
Armando J. L. Pombeiro
2020 ◽  
Vol 71 (10) ◽  
pp. 28-37
Author(s):  
Widia Sari ◽  
Hardoko Insan Qudus ◽  
Sutopo Hadi

Abstract: Chemical reactivity studies of the organotin(IV) carboxylates diphenyltin(IV) di-4-amino-benzoate (1) and triphenyltin(IV) 4-aminobenzoate (2) were conducted using cyclic voltammetry. Then, their antioxidant activities were tested by the 2,2-diphenyl-1-picrylshydrazyl (DPPH) method. Cyclic voltammetry was used to determine the kinetic constants of compounds 1 and 2 for the forward chemical reaction (kf). The constant values of the chemical reaction rate of 1 and 2 on cyclic voltammogram by experiment were obtained by comparing with the values from digital simulation methods obtained using Polar software 5.8.3. The results demonstrated that the constant value of the rate of the subsequent chemical reaction is a function of the rate of its potential (slope = kf/i); that is, 6.481 and 6.069 1/V for 1 and 2, respectively. The type of chemical reaction mechanism that occurs around the surface of the working electrode follows reaction mechanism of electrochemical reaction is quasi reversible and chemical reaction is irreversible (EqCi). The antioxidant activities of compounds 1 and 2 produced IC50 values of 5.91 and 12.57 ig/mL, respectively. These results indicate that both compounds are active as antioxidants. However, their antioxidant activities were lower than that of ascorbic acid, which has an IC50 value of 0.66 ig/mL.


2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Álvaro de Jesús Ruíz-Baltazar ◽  
Simón Yobanny Reyes-López ◽  
D. Larrañaga ◽  
R. Pérez

Nanoparticles of Ag with different sizes and structures were obtained and studied. Two methods for reductions of Ag ions were employed, chemical reduction by sodium borohydride and ethylene glycol. Cuboctahedral and icosahedral structures were obtained. Molecular simulations were carried out in order to evaluate the reactivity of both structures. On the other hand, the electrochemical activity and antibacterial effect (E. coli) of the cuboctahedral and icosahedral structures were measured experimentally. The results obtained by molecular simulation, cyclic voltammetry, and antibacterial effect were compared and discussed in this work.


2021 ◽  
Vol 1035 ◽  
pp. 602-607
Author(s):  
Zhi Hua Feng ◽  
Xian Fei Ding ◽  
Xin Feng ◽  
Hai Nan ◽  
Ai Bin Zhang

A comparative study of the surface contaminated layer formed by chemical reaction between ceramic-mold and titanium aluminum alloy castings or titanium alloy castings were carried out. The morphology, thickness and hardness of the surface contaminated layer were characterized by means of metalloscopy and microhardness measurement. The results show that surface contaminated layers formed between Ti-Al alloy castings and ceramic-mold, also formed between Ti alloy castings and ceramic-mold. The surface contaminated layers of Ti-Al alloy castings were continuous and compact, their thickness was about 0~90 μm. The surface contaminated layers of titanium alloy castings were not even, their thickness was 0~900 μm. Titanium alloy is more liable to react with the ceramic -mold than the Ti-Al alloy.


2020 ◽  
Vol 353 ◽  
pp. 136487
Author(s):  
Tim Tichter ◽  
Dirk Andrae ◽  
Jonathan Schneider ◽  
Marcus Gebhard ◽  
André Hilger ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document