scholarly journals Simulation of Scattering of Bending Characteristics of FRCC Based on Bridging Law Considering Fiber Distribution

2017 ◽  
pp. 509-517
Author(s):  
Toshiyuki Kanakubo ◽  
Keisuke Watanabe ◽  
Yuriko Ozu
Keyword(s):  
Fiber Distribution ◽  
Bridging Law

scholarly journals Modeling of Bridging Law for Bundled Aramid Fiber-Reinforced Cementitious Composite and its Adaptability in Crack Width Evaluation

Materials ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 179
Author(s):  
Daiki Sunaga ◽  
Takumi Koba ◽  
Toshiyuki Kanakubo
Keyword(s):  
Fiber Orientation ◽  
Crack Width ◽  
Volume Fraction ◽  
Characteristic Point ◽  
Crack Opening ◽  
Aramid Fiber ◽  
Cementitious Composite ◽  
Fiber Reinforced ◽  
Cross Sectional ◽  
Bridging Law

Tensile performance of fiber-reinforced cementitious composite (FRCC) after first cracking is characterized by fiber-bridging stress–crack width relationships called bridging law. The bridging law can be calculated by an integral calculus of forces carried by individual fibers, considering the fiber orientation. The objective of this study was to propose a simplified model of bridging law for bundled aramid fiber, considering fiber orientation for the practical use. By using the pullout characteristic of bundled aramid fiber obtained in the previous study, the bridging laws were calculated for various cases of fiber orientation. The calculated results were expressed by a bilinear model, and each characteristic point is expressed by the function of fiber-orientation intensity. After that, uniaxial tension tests of steel reinforced aramid-FRCC prism specimens were conducted to obtain the crack-opening behavior and confirm the adaptability of the modeled bridging laws in crack-width evaluation. The experimental parameters are cross-sectional dimensions of specimens and volume fraction of fiber. The test results are compared with the theoretical curves calculated by using the modeled bridging law and show good agreements in each parameter.

Stochastic aeroelastic analysis of laminated composite plate with variable fiber spacing

2021 ◽  
pp. 002199832110408
Author(s):  
Narayan Sharma ◽  
Prasant Kumar Swain ◽  
Dipak Kumar Maiti ◽  
Bhrigu Nath Singh
Keyword(s):  
Perturbation Technique ◽  
Laminated Composite ◽  
Distribution Patterns ◽  
Laminated Plates ◽  
Fiber Distribution ◽  
Various Boundary Conditions ◽  
Aeroelastic Analysis ◽  
Fiber Spacing ◽  
Reliability Method ◽  
Parametric Studies

In this paper, the dynamic and aeroelastic analysis of variable fiber spacing composite (VFSC) laminated plates are carried out. The effects and benefits of changing the fiber distribution pattern on natural frequency and mode shape are explored taking various boundary conditions. Taking cantilever boundary condition flutter characteristics of VFSC plate with different fiber distribution patterns are compared. Further stochasticity of flutter velocity due to randomness in material properties that could arise due to complex manufacturing and fabrication process of VFSC laminates is investigated. The perturbation technique is implemented to perform the stochastic as well as reliability analysis. Various parametric studies are conducted to check the accuracy and efficiency of perturbation technique, by comparing the results with that of Monte Carlo simulation and the first-order reliability method.

Toughening effect of non-periodic fiber distribution on crack propagation energy of UHTC composites

2019 ◽  
Vol 777 ◽  
pp. 612-618 ◽  
Author(s):  
S. Failla ◽  
P. Galizia ◽  
L. Zoli ◽  
A. Vinci ◽  
D. Sciti
Keyword(s):  
Crack Propagation ◽  
Fiber Distribution ◽  
Periodic Fiber

Analysis of the appearance of two-color cotton yarn by the double-channel spinning system

2018 ◽  
Vol 89 (9) ◽  
pp. 1712-1724 ◽  
Author(s):  
Mingrui Guo ◽  
Fengxin Sun ◽  
Lei Wang ◽  
Yuan Xue ◽  
Ruihua Yang ◽  
...  
Keyword(s):  
Weight Ratio ◽  
Fiber Distribution ◽  
Ring Spinning ◽  
Surface Distribution ◽  
Left Hand ◽  
Spun Yarns ◽  
The Mean ◽  
Compact Spinning ◽  
The Right ◽  
Double Channel

The main aim of this paper is to investigate the fiber distribution on the surface of a kind of novel two-color yarn spun by regulating the feeding ratio of two colored rovings on a modified ring spinning frame, which is named the double-channel spinning frame. The surface distribution ratio ( SDR) and the coefficient of variation of surface distribution evenness ( CV sd) of the two colored fiber strands in the yarns was used to quantify the fiber distribution feature along the yarns based on a purpose-made image acquisition device and the corresponding image processing method. The effect of the weight ratio, roving feeding position and spinning method on the mean SDR and CV sd were studied, and the testing results of the Z-twist and S-twist two-color yarns spun by a modified traditional ring spinning frame as well as the yarns spun by a modified compact spinning frame were compared with each other. The fibers of the left-hand roving are more likely to distribute in the surface of Z-twist yarn, while the fibers of the right-hand roving tend to distribute in the surface of S-twist yarn. Four linear fitting equations of the 19.4 tex Z-twist and S-twist two-color ring spun yarns and two-color compact spun yarns were developed to predict the relationships between the mean SDR and weight ratio of two colored fibers.

Sign in / Sign up

Export Citation Format

Share Document