Analysis of Liquid Effluents Discharge Method Under Normal Condition of One Inland NPP in the Northern Areas of China

Author(s):  
Lei Xing ◽  
Yongchun Yang ◽  
Hang Lv ◽  
Guanghui Ma
2019 ◽  
pp. 27-33
Author(s):  
Aleksei K. Solovyov ◽  
Bi Guofu

The term “window” in architecture usually stands for an opening in a wall or roof for penetration of natural light, sunrays and fresh air in premises. Recently, the requirement of contact with environment is added to this condition. It is especially relevant for residential buildings where rooms are considered residential if they have windows. The energy consumption of a building depends on sizes, form and location of windows. In winter, windows cause huge heat losses, in summer, on the other hand, large heat enters a building via the windows and is required to be removed by means of air conditioning. Moreover, windows are used for penetration of natural light in premises, which assists in saving of large amounts of power for artificial illumination. This article discusses partial solving the problem of the energy efficiency of residential buildings by determining the most efficient area of windows in terms of energy spending for compensation of heat losses via windows in winter, elimination of heat penetration through them in summer and energy losses for artificial lighting throughout the year. The analysis of the results of calculation of power consumption for residential premises in conditions of monsoon climate of the Russian Far East and Northern areas of China (PRC) is provided.


1999 ◽  
Vol 40 (1) ◽  
pp. 77
Author(s):  
Soon Gu Cho ◽  
Mi Young Kim ◽  
Young Soo Kim ◽  
Won Choi ◽  
Seok Hwan Shin ◽  
...  
Keyword(s):  

1999 ◽  
Vol 119 (8-9) ◽  
pp. 1084-1089 ◽  
Author(s):  
Haruo Kishida ◽  
Masafumi Tamura ◽  
Yoshiyasu Ehara ◽  
Tairo Ito

Author(s):  
Iryna Savka ◽  
◽  
Lesya Mateshuk-Vatseba ◽  
Yurij Kryvko ◽  
◽  
...  
Keyword(s):  

Author(s):  
Joseph P. Capesius ◽  
Joseph R. Sullivan ◽  
Gregory B. O'Neill ◽  
Cory A. Williams

2019 ◽  
Vol 56 (1) ◽  
pp. 73-76
Author(s):  
Carmen Penelopi Papadatu ◽  
Andrei Victor Sandu ◽  
Marian Bordei ◽  
Ion Sandu

Plasticity of the steel -as an important property of the material -has the role to show the capability of the steel to support plastic deformation necessary to obtain pieces for industry. Plasticity can be influenced by cooling regimes from higher temperatures in the cases of non-conventional treatments. An important factor is the cooling speed of the steel from higher temperatures during non-conventional treatment applied after lamination of the material. To modify the speed of the cooling, the medium of the cooling has been changed. The samples of the steel have been cooled in normal condition, in metallic box and using a jet of cold air. The evolution of the plasticity was studied taking in consideration the evolution of some characteristics. This paper might be considered as a review of the researches from the last years.


2016 ◽  
Vol 12 (6) ◽  
pp. 747-753 ◽  
Author(s):  
Marek J. Kasprowicz ◽  
Anna Gorczyca ◽  
Piotr Janas

Author(s):  
Sunny Katyara ◽  
Lukasz Staszewski ◽  
Faheem Akhtar Chachar

Background: Since the distribution networks are passive until Distributed Generation (DG) is not being installed into them, the stability issues occur in the distribution system after the integration of DG. Methods: In order to assure the simplicity during the calculations, many approximations have been proposed for finding the system’s parameters i.e. Voltage, active and reactive powers and load angle, more efficiently and accurately. This research presents an algorithm for finding the Norton’s equivalent model of distribution system with DG, considering from receiving end. Norton’s model of distribution system can be determined either from its complete configuration or through an algorithm using system’s voltage and current profiles. The algorithm involves the determination of derivative of apparent power against the current (dS/dIL) of the system. Results: This work also verifies the accuracy of proposed algorithm according to the relative variations in the phase angle of system’s impedance. This research also considers the varying states of distribution system due to switching in and out of DG and therefore Norton’s model needs to be updated accordingly. Conclusion: The efficacy of the proposed algorithm is verified through MATLAB simulation results under two scenarios, (i) normal condition and (ii) faulty condition. During normal condition, the stability factor near to 1 and change in dS/dIL was near to 0 while during fault condition, the stability factor was higher than 1 and the value of dS/dIL was away from 0.


Sign in / Sign up

Export Citation Format

Share Document