Vibration Signal Analyses of Gearbox in Time-Domain, Frequency-Domain, and Time–Frequency Domain

2016 ◽  
pp. 91-116
Author(s):  
Qingkai Han ◽  
Jing Wei ◽  
Qingpeng Han ◽  
Hao Zhang
Keyword(s):  
Frequency Domain ◽  
Time Domain ◽  
Vibration Signal ◽  
Time Frequency

scholarly journals Application of Xgboost Feature Extraction in Fault Diagnosis of Rolling Bearing

2020 ◽  
Vol 1 (2) ◽  
Author(s):  
Xingang WANG ◽  
Chao WANG
Keyword(s):  
Support Vector Machine ◽  
Feature Extraction ◽  
Fault Diagnosis ◽  
Frequency Domain ◽  
Time Domain ◽  
Vibration Signal ◽  
Rolling Bearing ◽  
Support Vector ◽  
Time Frequency ◽  
Diagnosis Accuracy

Due to the difficulty that excessive feature dimension in fault diagnosis of rolling bearing will lead to the decrease of classification accuracy, a fault diagnosis method based on Xgboost algorithm feature extraction is proposed. When the Xgboost algorithm classifies features, it generates an order of importance of the input features. The time domain features were extracted from the vibration signal of the rolling bearing, the time-frequency features were formed by the singular value of the modal components that were decomposed by the variational mode decomposition. Firstly, the extracted time domain and time-frequency domain features were input into the support vector machine respectively to observe the fault diagnosis accuracy. Then, Xgboost algorithm was used to rank the importance of features and got the accuracy of fault diagnosis. Finally, important features were extracted and the extracted features were input into the support vector machine to observe the fault diagnosis accuracy. The result shows that the fault diagnosis accuracy of rolling bearing is improved after important feature extraction in time domain and time-frequency domain by Xgboost.

scholarly journals A research on fiber-optic vibration pattern recognition based on time-frequency characteristics

2018 ◽  
Vol 10 (12) ◽  
pp. 168781401881346 ◽  
Author(s):  
Tabi Fouda Bernard Marie ◽  
Dezhi Han ◽  
Bowen An ◽  
Jingyun Li
Keyword(s):  
Pattern Recognition ◽  
Frequency Domain ◽  
Time Domain ◽  
Fiber Optic ◽  
Pattern Recognition Method ◽  
Recognition Method ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Vibration Pattern ◽  
The Time Domain

To detect and recognize any type of events over the perimeter security system, this article proposes a fiber-optic vibration pattern recognition method based on the combination of time-domain features and time-frequency domain features. The performance parameters (event recognition, event location, and event classification) are very important and describe the validity of this article. The pattern recognition method is precisely based on the empirical mode decomposition of time-frequency entropy and center-of-gravity frequency. It implements the function of identifying and classifying the event (intrusions or non-intrusion) over the perimeter to secure. To achieve this method, the first-level prejudgment is performed according to the time-domain features of the vibration signal, and the second-level prediction is carried out through time-frequency analysis. The time-frequency distribution of the signal is obtained by empirical mode decomposition and Hilbert transform and then the time-frequency entropy and center-of-gravity frequency are used to form the time-frequency domain features, that is, combined with the time-domain features to form feature vectors. Multiple types of probabilistic neural networks are identified to determine whether there are intrusions and the intrusion types. The experimental results demonstrate that the proposed method is effective and reliable in identifying and classifying the type of event.

Spectrum analysis of moving average operator and construction of time-frequency hybrid sequence operator

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Changhai Lin ◽  
Sifeng Liu ◽  
Zhigeng Fang ◽  
Yingjie Yang
Keyword(s):  
Frequency Domain ◽  
Time Domain ◽  
Moving Average ◽  
Spectral Characteristics ◽  
Complex Data ◽  
Time Data ◽  
Average Operator ◽  
Content Type ◽  
Time Frequency ◽  
Hybrid Sequence

PurposeThe purpose of this paper is to analyze the spectral characteristics of moving average operator and to propose a novel time-frequency hybrid sequence operator.Design/methodology/approachFirstly, the complex data is converted into frequency domain data by Fourier transform. An appropriate frequency domain operator is constructed to eliminate the impact of disturbance. Then, the inverse Fourier transform transforms the frequency domain data in which the disturbance is removed, into time domain data. Finally, an appropriate moving average operator of N items is selected based on spectral characteristics to eliminate the influence of periodic factors and noise.FindingsThrough the spectrum analysis of the real-time data sensed and recorded by microwave sensors, the spectral characteristics and the ranges of information, noise and shock disturbance factors in the data can be clarified.Practical implicationsThe real-time data analysis results for a drug component monitoring show that the hybrid sequence operator has a good effect on suppressing disturbances, periodic factors and noise implied in the data.Originality/valueFirstly, the spectral analysis of moving average operator and the novel time-frequency hybrid sequence operator were presented in this paper. For complex data, the ideal effect is difficult to achieve by applying the frequency domain operator or time domain operator alone. The more satisfactory results can be obtained by time-frequency hybrid sequence operator.

The Engine Fault Diagnosis Based on Time Domain and Frequency Domain

2014 ◽  
Vol 936 ◽  
pp. 2243-2246 ◽  
Author(s):  
Zhu Ting Yao ◽  
Hong Xia Pan
Keyword(s):  
Fault Diagnosis ◽  
Frequency Domain ◽  
Time Domain ◽  
Water Pressure ◽  
Cooling Water ◽  
Experimental System ◽  
Vibration Signal ◽  
Cylinder Block ◽  
Fuel Temperature ◽  
Multiple Faults

Engine is as a power machine, the operating status is good or bad, directly affects the working status of equipment. The status monitoring and fault diagnosis is very necessary to ensure that the equipment runs in its best, and improves equipment maintenance quality and efficiency. The engine failure shows the complexity and diversity of the interaction and complex relationship between the various subsystems of the engine, that is the fault of complexity, ambiguity, correlation, relativity and multiple faults coexistence. The available information are much in the engine diagnosis, for example, the vibration signal from bearings, cylinder head or cylinder block surface; oil, cooling water, pressure of intake, exhaust and fuel; temperature signal; noise, speed or oil-sample signals. In this paper, an engine as an example, engine fault diagnosis experimental system is built, the normal state, left one and right six cylinders off the oil, air filter blockage (inlet wood blockage is 30%, the inlet has screen cloth.) in the load of 2565Nm, and the speeds of 1500r/min, 1800r/min, 2200r/min are studied. The experimental results analysis, feature extraction and fault diagnosis are finished based on the time domain and frequency domain. Keywords: engine, fault diagnosis, time domain, frequency domain.

scholarly journals Recognition of Emotions Using Multichannel EEG Data and DBN-GC-Based Ensemble Deep Learning Framework

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Hao Chao ◽  
Huilai Zhi ◽  
Liang Dong ◽  
Yongli Liu
Keyword(s):  
Deep Learning ◽  
Frequency Domain ◽  
Time Domain ◽  
Recognition Task ◽  
Frequency Characteristics ◽  
Time Frequency ◽  
Learning Framework ◽  
Valence States ◽  
Correlation Information ◽  
Multiple Domains

Fusing multichannel neurophysiological signals to recognize human emotion states becomes increasingly attractive. The conventional methods ignore the complementarity between time domain characteristics, frequency domain characteristics, and time-frequency characteristics of electroencephalogram (EEG) signals and cannot fully capture the correlation information between different channels. In this paper, an integrated deep learning framework based on improved deep belief networks with glia chains (DBN-GCs) is proposed. In the framework, the member DBN-GCs are employed for extracting intermediate representations of EEG raw features from multiple domains separately, as well as mining interchannel correlation information by glia chains. Then, the higher level features describing time domain characteristics, frequency domain characteristics, and time-frequency characteristics are fused by a discriminative restricted Boltzmann machine (RBM) to implement emotion recognition task. Experiments conducted on the DEAP benchmarking dataset achieve averaged accuracy of 75.92% and 76.83% for arousal and valence states classification, respectively. The results show that the proposed framework outperforms most of the above deep classifiers. Thus, potential of the proposed framework is demonstrated.

A Computationally Efficient Multichannel Active Road Noise Control System

2014 ◽  
Vol 137 (1) ◽  
Author(s):  
Jie Duan ◽  
Mingfeng Li ◽  
Teik C. Lim ◽  
Ming-Ran Lee ◽  
Ming-Te Cheng ◽  
...  
Keyword(s):  
Frequency Domain ◽  
Time Domain ◽  
Noise Control ◽  
Acoustic Noise ◽  
Reference Signal ◽  
Active Noise Control ◽  
Computational Cost ◽  
Road Noise ◽  
Time Frequency ◽  
Fxlms Algorithm

A multichannel active noise control (ANC) system has been developed for a vehicle application, which employs loudspeakers to reduce the low-frequency road noise. Six accelerometers were attached to the vehicle structure to provide the reference signal for the feedforward control strategy, and two loudspeakers and two microphones were applied to attenuate acoustic noise near the headrest of the driver's seat. To avoid large computational burden caused by the conventional time-domain filtered-x least mean square (FXLMS) algorithm, a time-frequency domain FXLMS (TF-FXLMS) algorithm is proposed. The proposed algorithm calculates the gradient estimate and filtered reference signal in the frequency domain to reduce the computational requirement, while also updates the control signals in the time domain to avoid delay. A comprehensive computational complexity analysis is conducted to demonstrate that the proposed algorithm requires significantly lower computational cost as compared to the conventional FXLMS algorithm.

A Portable Detecting and Analytic Instrument of Vibration Signal

2012 ◽  
Vol 442 ◽  
pp. 305-308
Author(s):  
Jian Wei Li ◽  
Ling Wang ◽  
Hong Mei Zhang
Keyword(s):  
Frequency Domain ◽  
Virtual Instrument ◽  
Vibration Signal ◽  
Time Domain Analysis ◽  
Domain Analysis ◽  
Frequency Domain Analysis ◽  
Time Frequency ◽  
Notebook Computer ◽  
Usb Bus ◽  
Data Acquisition Card

It is often needed in engineering that detecting and analyzing vibration signal of some equipment. To meet the requirement, a portable detecting and analytic instrument was designed using virtual instrument concept. In the instrument, notebook computer was used as the platform of hardware. Vibration signal was obtained by integrated piezoelectric acceleration sensor (DTS0104T), and was transferred to a notebook computer through data acquisition card (NI USB-6210) based on USB bus. The software, running on the notebook computer, was developed under LabVIEW. Vibration signal could be displayed on screen, recorded in disk or printed by printer, retrieved, and analyzed. The analysis functions of the instrument include: time-domain analysis, frequency-domain analysis, time-frequency domain analysis, and correlation analysis. The instrument is compact, portable, powerful, and with friendly interfaces, has broad application prospects.

Extracting of Micro Doppler Parameter of Helicopter Rotor Based on Time-Frequency Analysis

2011 ◽  
Vol 130-134 ◽  
pp. 2696-2700 ◽  
Author(s):  
Lei Zhang ◽  
Guo Qing Huang
Keyword(s):  
Frequency Domain ◽  
Frequency Analysis ◽  
Time Domain ◽  
Good Method ◽  
Helicopter Rotor ◽  
Echo Signal ◽  
Time Frequency Analysis ◽  
Time Frequency ◽  
Radar Echo ◽  
Doppler Parameter

The micro Doppler effect of the radar echo signal of helicopter rotor is studied, and the formula of helicopter rotor echo is obtained. Then the received echo signal of helicopter rotor simulated is analyzed in time domain, frequency domain and time-frequency domain respectively, the analysis results show that it is a good method to extract micro Doppler of helicopter rotor echo by time-frequency analysis. According to analysis results, obtained a method to determine parity of blades and velocity of helicopter rotor, these methods can be used to identify helicopter.

scholarly journals Application of the Acoustic Emission Method for Diagnosis of On-Load Tap Changer

2017 ◽  
Vol 42 (1) ◽  
pp. 29-35 ◽  
Author(s):  
Henryk Majchrzak ◽  
Andrzej Cichoń ◽  
Sebastian Borucki
Keyword(s):  
Acoustic Emission ◽  
Frequency Domain ◽  
Time Domain ◽  
Operating Conditions ◽  
Time Frequency ◽  
Measurement Results ◽  
Tap Changer ◽  
The Time Domain ◽  
Load Tap Changer ◽  
Short Time

Abstract This paper provides an example of the application of the acoustic emission (AE) method for the diagnosis of technical conditions of a three-phase on-load tap-changer (OLTC) GIII type. The measurements were performed for an amount of 10 items of OLTCs, installed in power transformers with a capacity of 250 MVA. The study was conducted in two different OLTC operating conditions during the tapping process: under load and free running conditions. The analysis of the measurement results was made in both time domain and time-frequency domain. The description of the AE signals generated by the OLTC in the time domain was performed using the analysis of waveforms and determined characteristic times. Within the time-frequency domain the measured signals were described by short-time Fourier transform spectrograms.

Sign in / Sign up

Export Citation Format

Share Document