A Novel MTCMOS-Based On-Chip Soft-Start Circuit for Low Leakage LED Driver with Minimum In-Rush Current

Author(s):  
P. Magesh Kannan ◽  
G. Nagarajan
Keyword(s):  
2015 ◽  
Vol 30 (4) ◽  
pp. 2096-2107 ◽  
Author(s):  
Lin Cheng ◽  
Jinhua Ni ◽  
Yao Qian ◽  
Minchao Zhou ◽  
Wing-Hung Ki ◽  
...  

SPIN ◽  
2020 ◽  
Vol 10 (04) ◽  
pp. 2050027
Author(s):  
Inderjit Singh ◽  
Balwinder Raj ◽  
Mamta Khosla ◽  
Brajesh Kumar Kaushik

The continuous downscaling in CMOS devices has increased leakage power and limited the performance to a few GHz. The research goal has diverted from operating at high frequencies to deliver higher performance in essence with lower power. CMOS based on-chip memories consumes significant fraction of power in modern processors. This paper aims to explore the suitability of beyond CMOS, emerging magnetic memories for the use in memory hierarchy, attributing to their remarkable features like nonvolatility, high-density, ultra-low leakage and scalability. NVSim, a circuit-level tool, is used to explore different design layouts and memory organizations and then estimate the energy, area and latency performance numbers. A detailed system-level performance analysis of STT-MRAM and SOT-MRAM technologies and comparison with 22[Formula: see text]nm SRAM technology are presented. Analysis infers that in comparison to the existing 22[Formula: see text]nm SRAM technology, SOT-MRAM is more efficient in area for memory size [Formula: see text][Formula: see text]KB, speed and energy consumption for cache size [Formula: see text][Formula: see text]KB. A typical 256[Formula: see text]KB SOT-MRAM cache design is 27.74% area efficient, 2.97 times faster and consumes 76.05% lesser leakage than SRAM counterpart and these numbers improve for larger cache sizes. The article deduces that SOT-MRAM technology has a promising potential to replace SRAM in lower levels of computer memory hierarchy.


Sensors ◽  
2019 ◽  
Vol 19 (21) ◽  
pp. 4619
Author(s):  
Sean C. Morgan ◽  
Andre D. Hendricks ◽  
Mae L. Seto ◽  
Vincent J. Sieben

Presented here is the fabrication and characterization of a tunable microfluidic check valve for use in marine nutrient sensing. The ball-style valve makes use of a rare-earth permanent magnet, which exerts a pulling force to ensure it remains passively sealed until the prescribed cracking pressure is met. By adjusting the position of the magnet, the cracking pressure is shown to be customizable to meet design requirements. Further applicability is shown by integrating the valve into a poly(methyl methacrylate) (PMMA) lab-on-chip device with an integrated optical absorbance cell for nitrite detection in seawater. Micro-milling is used to manufacture both the valve and the micro-channel structures. The valve is characterized up to a flow rate of 14 mL min−1 and exhibits low leakage rates at high back pressures (<2 µL min−1 at ~350 kPa). It is low cost, requires no power, and is easily implemented on microfluidic platforms.


2011 ◽  
Vol 46 (12) ◽  
pp. 2772-2783 ◽  
Author(s):  
Sachin Rao ◽  
Qadeer Khan ◽  
Sarvesh Bang ◽  
Damian Swank ◽  
Arun Rao ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document