Optimization of Cutting Parameters of Machinability Aspects During Dry Turning

2020 ◽  
pp. 79-94
Author(s):  
Anurag Sharma ◽  
R. C. Singh ◽  
Ranganath M. Singari
Keyword(s):  
Cutting Parameters ◽  
Dry Turning ◽  
Optimization Of Cutting Parameters

Statistical Study and Multi-Response Optimization of Cutting Parameters for Dry Turning Stainless Steel AISI 316L Using Cermet Tool

2020 ◽  
Vol 36 ◽  
pp. 28-46
Author(s):  
Youssef Touggui ◽  
Salim Belhadi ◽  
Salah Eddine Mechraoui ◽  
Mohamed Athmane Yallese ◽  
Mustapha Temmar
Keyword(s):  
Surface Roughness ◽  
Cutting Force ◽  
Feed Rate ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Aisi 316L ◽  
Cutting Power ◽  
Dry Turning ◽  
Optimization Of Cutting Parameters

Stainless steels have gained much attention to be an alternative solution for many manufacturing industries due to their high mechanical properties and corrosion resistance. However, owing to their high ductility, their low thermal conductivity and high tendency to work hardening, these materials are classed as materials difficult to machine. Therefore, the main aim of the study was to examine the effect of cutting parameters such as cutting speed, feed rate and depth of cut on the response parameters including surface roughness (Ra), tangential cutting force (Fz) and cutting power (Pc) during dry turning of AISI 316L using TiCN-TiN PVD cermet tool. As a methodology, the Taguchi L27 orthogonal array parameter design and response surface methodology (RSM)) have been used. Statistical analysis revealed feed rate affected for surface roughness (79.61%) and depth of cut impacted for tangential cutting force and cutting power (62.12% and 35.68%), respectively. According to optimization analysis based on desirability function (DF), cutting speed of 212.837 m/min, 0.08 mm/rev feed rate and 0.1 mm depth of cut were determined to acquire high machined part quality

Optimization of Cutting Parameters Considering Surface Roughness When Milling AISI 304 Steel Using Coated Wc-Co and Tialn / Wc-Co Coated

2019 ◽  
Author(s):  
Murilo Pereira Lopes ◽  
Jose Rubens Gonçalves Carneiro ◽  
Gilmar Cordeiro da Silva ◽  
Carlos Eduardo Santos ◽  
Ítalo Bruno dos Santos
Keyword(s):  
Surface Roughness ◽  
Cutting Parameters ◽  
Aisi 304 ◽  
Aisi 304 Steel ◽  
Optimization Of Cutting Parameters
Sign in / Sign up

Export Citation Format

Share Document