Dye Degradation by Recent Promising Composite

2021 ◽  
pp. 85-101
Author(s):  
Djamal Zerrouki ◽  
Abdellah Henni
Keyword(s):  
Dye Degradation

Photocatalytic Degradation of Methyl Orange Dye with Synthesized Chitosan/Fe2O3Nanocomposite and its Isotherm Studies.

2020 ◽  
Vol 16 ◽  
Author(s):  
Nimisha Jadon ◽  
Gulzar Ahmad Bhat ◽  
Manoharmayum Vishwanath Sharma ◽  
Harendra Kumar Sharma
Keyword(s):  
Methyl Orange ◽  
Dye Degradation ◽  
Dose Effect ◽  
X Ray Diffraction ◽  
Methyl Orange Degradation ◽  
Transmission Electron ◽  
Fourier Transformation Infrared Spectroscopy ◽  
Vis Spectroscopy ◽  
Methyl Orange Dye ◽  
Degradation Of Methyl Orange

Background: The study focuses on the synthesis of chitosan/ Fe2O3 nanocomposite, its characterization and application in methyl orange dye degradation. Methods: The synthesized chitosan/ Fe2O3 nanocomposite was characterized with Powder X-Ray Diffraction, Fourier Transformation Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and UV-Vis Spectroscopy. Results: The characterization showed that the Fe2O3nanoparticles were embedded in the polymer matrix of chitosan. The size of the Fe2O3nanoparticles were less than 10nm and the crystallite size was 1.22 nm.The synthesized chitosan/ Fe2O3nanocomposite was tested for methyl orange degradation using different parameters such as effect of contact time, effect of dose, effect of concentration and effect of pH for the degradation of methyl orange dye in aqueous solution.The Fruendlich, Langmuir and Temkin isotherm studies were also conducted for adsoption of methyl orange on Chitosan/ Fe2O3nanocomposite. Conclusion: The study indicated that the synthesized chitosan/Fe2O3 nanocomposite had the potential of degrading methyl orange dye up to 75.04% under the set condition in this experiment which indicate that Chitosan/ Fe2O3 nanocomposite is a viable option that can be used for the degradation of methyl orange dye.

Biogenic synthesis of copper nanoparticles from rose (Rosa indica L.) and their applications in photocatalytic degradation of Malachite Green and Carbol Fuchsin dyes

2020 ◽  
Vol 10 ◽  
Author(s):  
Manmeet Kaur ◽  
Suman Prajapati ◽  
Samneek Cholia ◽  
Jaskeet Singh Mann ◽  
Gurpreet Singh
Keyword(s):  
Photocatalytic Degradation ◽  
Malachite Green ◽  
Copper Nanoparticles ◽  
Dye Degradation ◽  
Industrial Effluent ◽  
Copper Nanoparticle ◽  
Synthesis Of Nanoparticles ◽  
Carbol Fuchsin ◽  
Double Beam ◽  
The Rose

Background: In the recent years, the green synthesis of nanoparticles has taken a lead role over the conventional chemical and physical approach due to its non-toxic, cost effective parameters and has found its place in various applications. Objectives: The major objectives of this study was to synthesise and characterize the copper nanoparticles using the rose extract at different set of conditions and analyse these nanoparticles as a source of dye degradation agent under sunlight conditions. Methods: Present study was conducted with the aim to synthesis the copper nanoparticle using the rose petal extract. The components present the in the extract act as the reduction and stabilization agents for the synthesis of CuNPs. The synthesized nanoparticles were characterized by using UV-VIS, FTIR, XRD and SEM analysis. Photocatalytic degradation of two dyes (Malachite Green and Carbol fuchsin) was analysed using double beam spectroscopic analysis Results: UV-Vis analysis indicated the presence of a peak at around 630 nm. The FT-IR analysis indicated the involvement of various biomolecules during the synthesis of nanoparticles. The structure and the conformation was elucidated using XRD and SEM showed the agglomerated form of the synthesized nanoparticles with the size range of about 60-90 nm. The synthesised copper nanoparticles was used for degradation of malachite green and carbol fuchsin dye using photocatalytic under sunlight irradiation. UV-Vis spectral analysis indicated that synthesised copper nanoparticle act more effective in degradation of malachite green (around 95%) whereas carbol fuchsin showed a maximum degradation by 52% therefore suggesting that CuNPs act as an efficient photo catalyst in dye degradation. Conclusion: The results obtained from this study indicates that rose extract has the potential of synthesis of copper nanoparticles which is non-toxic and convenient approach as compared to physical and chemical synthesis. These nanoparticles can be effectively employed as dye decolourization agents to treat industrial effluent and prevent the environmental pollution.

Photo-catalytic Study of Malachite Green Dye Degradation Using Rice Straw Extracted Activated Carbon Supported ZnO Nano-particles

2020 ◽  
Vol 10 (6) ◽  
pp. 849-859
Author(s):  
Radwa A. El-Salamony ◽  
Abeer A. Emam ◽  
Nagwa A. Badawy ◽  
Sara F. El-Morsi
Keyword(s):  
Activated Carbon ◽  
Visible Light ◽  
Rice Straw ◽  
Malachite Green ◽  
Dye Degradation ◽  
Nano Particles ◽  
Oh Radicals ◽  
Impregnation Method ◽  
Photo Degradation ◽  
Malachite Green Dye

Objective: ZnO nanoparticles were synthesized using wet impregnation method, and activated carbon from rice straw (RS) prepared through chemical route. Methods: The nano-composites ZnO-AC series were prepared with different ZnO:AC ratio of 10, 20, 50, and 70% to optimize the zinc oxide nanoparticles used. The obtained composites were characterized by FE-SEM, XRD, SBET, and optical techniques then used for the photo-degradation of Malachite green dye (MG) under visible light. Results: It was found that 10ZnO-AC exhibited excellent visible light photo-catalytic performance. The ·OH radicals’ formation is matching with photo-activity of the prepared composites. The photo-degradation efficiency of MG increased from 63% to 93%, when the 10ZnO-AC photocatalyst amount was increased from 0.5 to 6 g/L. Conclusion: The GC-MS technique was used to analyze the intermediates formed; up to 15 kinds of chemicals were identified as the degradation products.

scholarly journals Enhanced Visible-Light Photocatalytic Performance of SAPO-5-Based g-C3N4 Composite for Rhodamine B (RhB) Degradation

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3948
Author(s):  
Lingfang Qiu ◽  
Zhiwei Zhou ◽  
Mengfan Ma ◽  
Ping Li ◽  
Jinyong Lu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Redox Reactions ◽  
Photocatalytic Performance ◽  
Dye Degradation ◽  
Thermal Polymerization ◽  
Light Illumination ◽  
Electron Hole ◽  
Visible Light Illumination ◽  
Visible Light Photocatalytic

Novel visible-light responded aluminosilicophosphate-5 (SAPO-5)/g-C3N4 composite has been easily constructed by thermal polymerization for the mixture of SAPO-5, NH4Cl, and dicyandiamide. The photocatalytic activity of SAPO-5/g-C3N4 is evaluated by degrading RhB (30 mg/L) under visible light illumination (λ > 420 nm). The effects of SAPO-5 incorporation proportion and initial RhB concentration on the photocatalytic performance have been discussed in detail. The optimized SAPO-5/g-C3N4 composite shows promising degradation efficiency which is 40.6% higher than that of pure g-C3N4. The degradation rate improves from 0.007 min−1 to 0.022 min−1, which is a comparable photocatalytic performance compared with other g-C3N4-based heterojunctions for dye degradation. The migration of photo-induced electrons from g-C3N4 to the Al site of SAPO-5 should promote the photo-induced electron-hole pairs separation rate of g-C3N4 efficiently. Furthermore, the redox reactions for RhB degradation occur on the photo-induced holes in the g-C3N4 and Al sites in SAPO-5, respectively. This achievement not only improves the photocatalytic activity of g-C3N4 efficiently, but also broadens the application of SAPOs in the photocatalytic field.

Facile fabrication of a new BiFeWO6/α-AgVO3 composite with efficient visible-light photocatalytic activity for dye-degradation

2019 ◽  
Vol 92 ◽  
pp. 284-293 ◽  
Author(s):  
Raja Arumugam Senthil ◽  
Meng Sun ◽  
Junqing Pan ◽  
Sedahmed Osman ◽  
Abrar Khan ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Dye Degradation ◽  
Visible Light Photocatalytic Activity ◽  
Facile Fabrication ◽  
Visible Light Photocatalytic

Influence of in-situ and ex-situ Cu-Fe doping in K-OMS-2 catalysts on dye degradation via Fenton-like reaction with focus on catalytic properties and performances

2021 ◽  
Vol 23 ◽  
pp. 101030
Author(s):  
Kitirote Wantala ◽  
Totsaporn Suwannaruang ◽  
Janthip Palalerd ◽  
Prae Chirawatkul ◽  
Narong Chanlek ◽  
...  
Keyword(s):  
Catalytic Properties ◽  
Dye Degradation ◽  
Ex Situ ◽  
Fe Doping

One‐Pot Solvothermal Synthesis of Flower‐Like S‐Doped BiOCl for Enhanced Photocatalytic Property in Dye Degradation and Nitrogen Fixation

2021 ◽  
Vol 6 (23) ◽  
pp. 5771-5777
Author(s):  
Hongjuan Wang ◽  
Chenghe Hua ◽  
Meng Lan ◽  
Nan Zheng ◽  
Xiaoli Dong ◽  
...  
Keyword(s):  
Nitrogen Fixation ◽  
Solvothermal Synthesis ◽  
Dye Degradation ◽  
Photocatalytic Property ◽  
One Pot
Sign in / Sign up

Export Citation Format

Share Document