Thermally sprayed protective coatings are applied onto many mechanically stressed components such as support structures, shafts, turbine blades or heat exchangers. In addition to the static or cyclic load, a superimposition with corrosion processes occurs in many cases. Thermal sprayed ZnAl coatings are known for their performant corrosion protection properties. Within this context, the potential of ZnAl-based layer systems was analyzed regarding corrosion fatigue behavior. Therefore, a timeand cost-efficient testing strategy based on a corrosion-superimposed load increase procedure was used to estimate the effects of a corrosive attack during cyclic loading. The investigated coating systems were thermally sprayed and partially post-processed with a Machine Hammer Peening (MHP) operation. This treatment was identified as an appropriate technique for compressing and smoothing coated surfaces. The inter-relationships between the parametrization of the MHP process, the resulting surface integrity, and the estimated corrosion fatigue properties were analyzed. The investigations indicate a positive effect of MHP post-processing operations on the surface properties of the ZnAl-based coating system.
Post-Processing of Cold Sprayed Ti-6Al-4V Coatings by Mechanical Peening
