Full Speed Position Estimation Based on Disturbance Observer and HF Signal Injection for IPMSM Sensorless Control

Author(s):  
Xiaoquan Lu ◽  
Hanmiao Cheng ◽  
Xiaodong Cao ◽  
Shihai Yang ◽  
Fei Peng
Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1919
Author(s):  
Lei Guo ◽  
Zhongping Yang ◽  
Fei Lin

In the applications of rail transit and electric vehicles, sensorless control of interior permanent magnet synchronous motor (IPMSM) usually uses high frequency (HF) signal injection in low speed or zero speed. Rotating HF signal injection based on the stationary reference frame can identify the rotor position, but its accuracy is easily affected by various nonlinearities of the control system and stator resistance. In this paper, the causes of rotor position estimation deviation are analyzed and deduced in detail. It is proposed that the rotor position estimation deviation can be divided into high frequency phase deviation (HFPD) and stator resistance phase deviation. On the basis of these analyses, a novel sensorless rotor position estimation strategy for IPMSM is proposed. This strategy can theoretically eliminate the HF phase deviation caused by the nonlinearity of the control system and reduce the phase deviation caused by the stator resistance. Although the factors that cause the estimation deviation of rotor position may change with the time and the operation status of the motor, the proposed strategy has the characteristics of online calculation and real-time compensation, which can improve the accuracy of the estimated rotor position. In addition, this paper provides a detailed theoretical derivation of resolving rotor position considering stator resistance and HF phase deviation. Finally, the result analysis on an IPMSM demonstrate the correctness of the theoretical analysis and the effectiveness of the strategy.


2011 ◽  
Vol 383-390 ◽  
pp. 5951-5957 ◽  
Author(s):  
Jian Min Wang ◽  
Shi Xia Tian

This paper analyzes the effects of stator resistance on rotor position estimation accuracy in carrier signal injection based sensorless control of PMSM. Carrier current expressions are derived for both rotating and pulsating voltage injection method when the stator resistance is taken into account. Position estimation errors resulted from stator resistance are analyzed theoretically and investigated by simulation. It is shown that the influences of stator resistance on above two injection methods are quite different. The stator resistance will result in a position estimation error in the rotating voltage injection method. But it does not affect the position estimation accuracy in the pulsating voltage injection method as long as a suitable signal extracting method is used.


Sign in / Sign up

Export Citation Format

Share Document