Wide range stress intensity factor and crack mouth opening displacement expressions suitable for short crack fracture testing with arc-bend chord support samples

1989 ◽  
Vol 39 (1-3) ◽  
pp. R7-R12 ◽  
Author(s):  
J. A. Kapp
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Mouth Opening ◽  
Short Crack ◽  
Crack Mouth Opening Displacement ◽  
Crack Mouth ◽  
Opening Displacement ◽  
Fracture Testing ◽  
Wide Range

Stress Intensity at the Initiation of Instability by R Curve

2014 ◽  
Vol 592-594 ◽  
pp. 1160-1164 ◽  
Author(s):  
S. Sundaresan ◽  
B. Nageswara Rao
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Critical Stress ◽  
Mouth Opening ◽  
Compact Tension ◽  
Critical Stress Intensity Factor ◽  
Pressure Vessels ◽  
Crack Mouth Opening Displacement ◽  
Opening Displacement

The life expectancy or failure of aerospace pressure vessels is evaluated by the critical stress intensity determined by the crack growth resistance curve of a material. Load versus crack mouth opening displacement data is generated from the Compact Tension specimens made from the weld joints of maraging steel rocket motor segments. The steps involved to generate critical stress intensity factor is explained. A power law is adopted to model the crack extension in terms of stress intensity factor and determine the maximum failure load of weld specimens. Maximum failure loads of CT specimens obtained by test and analysis are presented.

Revised η-Factors for 3P SE(B) Fracture Specimens Incorporating 3-D Effects

2014 ◽  
Author(s):  
Rodolfo F. de Souza ◽  
Claudio Ruggieri
Keyword(s):  
Fracture Toughness ◽  
Mouth Opening ◽  
Estimation Procedure ◽  
Crack Mouth Opening Displacement ◽  
Evaluation Procedure ◽  
Specimen Thickness ◽  
Crack Mouth ◽  
Opening Displacement ◽  
Wide Range ◽  
Fracture Specimens

Standardized procedures to measure cleavage fracture toughness of ferritic steels in the DBT region most commonly employ three-point bend fracture specimens, conventionally termed SE(B) or SENB specimens. The evaluation protocol of fracture toughness for these crack configurations builds upon laboratory records of load and crack mouth opening displacement (CMOD) to relate plastic work with J (or, equivalently, CTOD). The experimental approach employs a plastic η-factor to relate the macroscale crack driving force to the area under the load versus crack mouth opening displacement for cracked configurations. This work provides revised η-factors derived from CMOD records applicable to estimate the J-integral and CTOD in SE(B) specimens with varying crack size and specimen configuration. Non-linear finite element analyses for plane-strain and 3-D models provide the evolution of load with increased CMOD which is required for the estimation procedure. The analysis matrix considers SE(B) specimens with W = 2B and W = B configurations with and without side grooves covering a wide range of specimen thickness, including precracked Charpy (PCVN) specimens. Overall, the present results provide further validation of the J and CTOD evaluation procedure currently adopted by ASTM 1820 while, at the same time, giving improved estimation equations for J incorporating 3-D effects which enter directly into more accurate testing protocols for experimental measurements of fracture toughness values using 3P SE(B) specimens.

Determination of Fracture Parameters for Non-Standard Wedge Splitting Specimen of Concrete

2010 ◽  
Vol 452-453 ◽  
pp. 425-428 ◽  
Author(s):  
Yan Hua Zhao ◽  
Hua Zhang ◽  
Wei Dong
Keyword(s):  
Fracture Toughness ◽  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Crack Length ◽  
Crack Extension ◽  
Crack Mouth Opening Displacement ◽  
Opening Displacement ◽  
Fracture Parameters ◽  
Wedge Splitting

The wedge splitting (WS) test is now a promising method to perform stable fracture mechanics tests on concrete-like quasi brittle materials. Fracture parameters, such as fracture toughness and critical crack opening displacement and et.al, are however not easy to determined since formulae available from stress intensity factor manual are restricted to standard specimen geometry. The paper attempts to compute expressions for commonly used fracture parameters for a general wedge splitting specimen. By means of finite element analysis program, test simulation was performed on non-standard wedge splitting specimen with different depth and initiation crack length, and thereafter expressions were proposed for stress intensity factor at the pre-cast tip and crack mouth opening displacement on the load line. Based on the work above, size effect on the unstable fracture toughness and crack extension were investigated, and the consistency of fracture toughness data for various specimen depth as well as initiation crack length is demonstrated. The crack extension is little sensitive to the initiation crack length, it increases with the depth of specimen, which can be explained by the boundary influence of the specimen.

Importance of Material’s Dynamic Stress Intensity Factor Calculation in the Design of High Strenght Structures

2015 ◽  
Vol 15 ◽  
pp. 97-106
Author(s):  
Raja Ahsan Javed ◽  
Shi Fan Zhu ◽  
Feng Chun Jiang
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Dynamic Stress ◽  
Dynamic Stress Intensity Factor ◽  
Mouth Opening ◽  
Design Stage ◽  
Crack Mouth Opening Displacement ◽  
Hopkinson Pressure Bar ◽  
Three Dimensional Model

The researchers and scientists have concluded that material dynamic fracture properties must be considered during the design stage of the modern structure. The dynamic stress intensity factor is very important in understanding of material dynamic behavior. Keeping in view the importance of the materials dynamic stress intensity factor: an efficient and reliable numerical-analytical procedure is developed for calculation of dynamic stress intensity factor. For this, three-dimensional model of a Modified Hopkinson Pressure Bar (MHPB) and a specimen is modeled and analyzed with the ANSYS software. Transient dynamic analysis technique is used for simulation of load-variations as a function of time. As an output of analysis, values of load point displacement and Crack Mouth Opening Displacement (CMOD) are obtained. These values are substituted into two different analytical formulas for calculation of a dynamic stress intensity factor. The results obtained are compared with previous published results, and a good agreement is found.

Effects of Weld Strength Mismatch on Estimation Procedures for J and CTOD Fracture Parameters Using SE(B) Specimens

2007 ◽  
Author(s):  
Gustavo H. B. Donato ◽  
Claudio Ruggieri
Keyword(s):  
Mouth Opening ◽  
Estimation Procedure ◽  
Primary Objective ◽  
Weld Strength ◽  
Crack Mouth Opening Displacement ◽  
Opening Displacement ◽  
Fracture Parameters ◽  
Wide Range ◽  
Estimation Procedures ◽  
Fracture Specimens

This work presents an exploratory development of J and CTOD estimation procedures for welded fracture specimens under bending based upon plastic eta factors and plastic rotation factors. The techniques considered include: i) estimating J and CTOD from plastic work and ii) estimating CTOD from the plastic rotational factor. The primary objective is to gain additional understanding on the effect of weld strength mismatch on estimation techniques to determine J and CTOD fracture parameters for a wide range of a/W-ratios and mismatch levels. Very detailed non-linear finite element analyses for plane-strain models of SE(B) fracture specimens with center cracked, square groove welds provide the evolution of load with increased load-line displacement and crack mouth opening displacement which are required for the estimation procedure. The results show that levels of weld strength mismatch within the range ±20% mismatch do not affect significantly J and CTOD estimation expressions applicable to homogeneous materials, particularly for deeply cracked fracture specimens. The present analyses, when taken together with previous studies, provide a fairly extensive body of results which serve to determine parameters J and CTOD for different materials using bend specimens with varying geometries and mismatch levels.

A Review of K-Solutions for Through-Thickness Flaws in Cylinders and Spheres

2007 ◽  
Author(s):  
Ali Mirzaee Sisan ◽  
Isabel Hadley ◽  
Sarah E. Smith ◽  
Mike Smith
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Loading Conditions ◽  
Wide Range ◽  
Cylinders And Spheres

This paper reviews different stress intensity factor solutions for a wide range of configurations and loading conditions for a cylinder with axial and circumferential through thickness cracks and a sphere with through thickness meridional (equatorial) cracks. The most appropriate solutions to use are identified.

A Crack Mouth Opening Displacement Gauge made with Passive UHF RFID Technology

2021 ◽  
pp. 1-1
Author(s):  
A. DiNatale ◽  
A. DiCarlofelice ◽  
E. DiGiampaolo
Keyword(s):  
Mouth Opening ◽  
Crack Mouth Opening Displacement ◽  
Rfid Technology ◽  
Uhf Rfid ◽  
Crack Mouth ◽  
Opening Displacement ◽  
Passive Uhf Rfid
Sign in / Sign up

Export Citation Format

Share Document