Beryllium ? A new structural material

1969 ◽  
Vol 11 (2) ◽  
pp. 106-110
Author(s):  
L. A. Izhvanov ◽  
N. F. Mironov ◽  
S. B. Kostogarov ◽  
N. M. Bogorad ◽  
R. G. Fraishtut ◽  
...  
Keyword(s):  
Structural Material

AISI TYPE 405

Alloy Digest ◽  
1988 ◽  
Vol 37 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Structural Material ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Continuous Service ◽  
Aisi Type

Abstract AISI Type 405 has marginal stainless corrosion resistance. It is used primarily as a structural material. It is serviceable in continuous service up to 1300 F and in intermittent exposures up to 1500 F. It does not harden appreciably when air cooled from high temperatures where some austenite may exist. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-129. Producer or source: Alloy steel mills and foundries. Originally published March 1962, revised April 1988.

REPUBLIC RS-110A

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Shear Strength ◽  
High Temperature ◽  
Structural Material ◽  
Physical Properties ◽  
Heat Treating ◽  
Alloying Element ◽  
Temperature Performance ◽  
Medium Strength

Abstract Republic RS-110A is a titanium alloy containing manganese as its principle alloying element. The alloy is a medium strength, highly formable sheet alloy which has been used extensively as an aircraft structural material. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-35. Producer or source: Republic Steel Corporation, Titanium Division.

Cellulose-Based Hybrid Structural Material for Radiative Cooling

Nano Letters ◽  
2020 ◽  
Author(s):  
Yipeng Chen ◽  
Baokang Dang ◽  
Jinzhou Fu ◽  
Chao Wang ◽  
Caicai Li ◽  
...  
Keyword(s):  
Structural Material ◽  
Radiative Cooling

Research on Chemical Modification of Wood of Fast-Growing Poplar

2013 ◽  
Vol 749 ◽  
pp. 461-465
Author(s):  
De Jun Shen ◽  
Chang Hai Yu ◽  
Zhen Xing
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Structural Material ◽  
Chemical Modification ◽  
Orthogonal Test ◽  
Low Molecular Weight ◽  
Wood Structure ◽  
Optimum Conditions ◽  
Fast Growing ◽  
Performance Requirements

This topic is considered to modify the fast-growing Poplar to improve the properties, in order to fully meet the performance requirements for the structural material. This study aims to improve the dimensional stability and some other mechanical properties through impregnated with the low-molecular-weight PF resin. Through design orthogonal test in different mole ratio of Formaldehyde and Phenol, different amount of NaOH and PVA, we make PF resin to impregnate Poplar and pressing into laminated timber to measure bonding strength, MOR, MOE. The study indicated that: the optimum conditions of the low molecular weight PF resin for modify Poplar are: mole ratio of Formaldehyde and Phenol is 2.4, mole ratio of NaOH and phenol is 0.05, amount of PVA is 3% of the phenol. Under this condition Poplar specimen got the biggest increase in various properties and it can satisfy the requirements of the outdoor wood structure.

Bone as a Structural Material

2015 ◽  
Vol 4 (9) ◽  
pp. 1287-1304 ◽  
Author(s):  
Elizabeth A. Zimmermann ◽  
Robert O. Ritchie
Keyword(s):  
Structural Material

Aging and strength of bone as a structural material

1993 ◽  
Vol 53 (S1) ◽  
pp. S34-S40 ◽  
Author(s):  
Bruce Martin
Keyword(s):  
Structural Material

Some Regularities of Life Time and Damage for the New Structural Material MoNiCa during Sliding Friction and Mechano-Sliding Fatigue

2021 ◽  
Vol 320 ◽  
pp. 90-96
Author(s):  
Aliaksandr Bahdanovich ◽  
Sergei Sherbakov ◽  
Ivan Lis ◽  
Regita Bendikiene ◽  
Ramūnas Česnavičius ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Structural Material ◽  
Mechanical System ◽  
Sliding Friction ◽  
Limit State ◽  
High Strength ◽  
Life Time ◽  
Average Wear ◽  
The Republic ◽  
Number Of Cycles

The results of an experimental study of damage for the structural material MoNiCa (it is high-strength cast iron VCHTG – patent of the Republic of Belarus № 15617) on sliding friction and mechano-sliding fatigue are analyzed in the report. Tests of the mechanical system shaft (a sample with a working part diameter of 10 mm made of 0.45 % carbon steel) - an insert (a prismatic counter sample with a cross section of 10 ´ 10 mm made of MoNiCa) were carried out. The kinetics of the change in average wear at 8 local points along the perimeter of the dangerous area of the sample is given for contact loads FN from 20 to 92 N of the mechanical system under study with MoNiCa inserts without heat treatment and with heat treatment. The test results of the system under study are also presented in the form of sliding friction and mechano-sliding fatigue curves in coordinates of the contact load FN – the number of cycles N until the limit state.

INDUSTEEL MARS 600

Alloy Digest ◽  
2021 ◽  
Vol 70 (1) ◽  
Keyword(s):  
Structural Material ◽  
Tensile Properties ◽  
Heat Treating ◽  
Bend Strength ◽  
Medium Carbon ◽  
Nickel Chromium

Abstract Industeel Mars 600 is a medium-carbon, nickel-chromium-molybdenum-boron, alloy protection steel that is used in the quenched and tempered condition (typical hardness = 600 HBW). It is used not only as an add-on armor, but also as a structural material. This datasheet provides information on composition, hardness, tensile properties, and bend strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-876. Producer or source: Industeel France (a subsidiary of ArcelorMittal).

Sign in / Sign up

Export Citation Format

Share Document