Heating of a cylindrical body with internal heat sources and a variable heat transfer coefficient

1966 ◽  
Vol 11 (2) ◽  
pp. 88-90 ◽  
Author(s):  
Yu. V. Vidin
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Internal Heat ◽  
Cylindrical Body ◽  
Heat Sources ◽  
Variable Heat ◽  
Internal Heat Sources

Experimental and numerical analysis of a plate heat exchanger using variable heat transfer coefficient

2021 ◽  
pp. 1-19
Author(s):  
Muhammad Ahmad Jamil ◽  
Talha S. Goraya ◽  
Haseeb Yaqoob ◽  
Muhammad Wakil Shahzad ◽  
Syed M. Zubair
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Heat Exchanger ◽  
Numerical Analysis ◽  
Transfer Coefficient ◽  
Plate Heat Exchanger ◽  
Plate Heat ◽  
Variable Heat

The Measurement of Full-Surface Internal Heat Transfer Coefficients for Turbine Airfoils Using a Non-Destructive Thermal Inertia Technique

2002 ◽  
Author(s):  
Nirm V. Nirmalan ◽  
Ronald S. Bunker ◽  
Carl R. Hedlung
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
External Surface ◽  
Internal Heat ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Turbine Airfoils ◽  
Non Destructive ◽  
Internal Heat Transfer

A new method has been developed and demonstrated for the non-destructive, quantitative assessment of internal heat transfer coefficient distributions of cooled metallic turbine airfoils. The technique employs the acquisition of full-surface external surface temperature data in response to a thermal transient induced by internal heating/cooling, in conjunction with knowledge of the part wall thickness and geometry, material properties, and internal fluid temperatures. An imaging Infrared camera system is used to record the complete time history of the external surface temperature response during a transient initiated by the introduction of a convecting fluid through the cooling circuit of the part. The transient data obtained is combined with the cooling fluid network model to provide the boundary conditions for a finite element model representing the complete part geometry. A simple 1D lumped thermal capacitance model for each local wall position is used to provide a first estimate of the internal surface heat transfer coefficient distribution. A 3D inverse transient conduction model of the part is then executed with updated internal heat transfer coefficients until convergence is reached with the experimentally measured external wall temperatures as a function of time. This new technique makes possible the accurate quantification of full-surface internal heat transfer coefficient distributions for prototype and production metallic airfoils in a totally non-destructive and non-intrusive manner. The technique is equally applicable to other material types and other cooled/heated components.

Confined Liquid Jet Impingement on a Plate With Discrete Heating Elements

2005 ◽  
Author(s):  
Muhammad M. Rahman ◽  
Santosh K. Mukka
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Jet Impingement ◽  
Liquid Jet ◽  
Heat Sources ◽  
Average Heat Transfer Coefficient ◽  
Average Heat ◽  
Discrete Heat Sources ◽  
Solid Region

The primary focus of this paper is the conjugate heat transfer during vertical impingement of a two-dimensional (slot) submerged confined liquid jet using liquid ammonia as the working fluid. Numerical model for the heat transfer process has been developed. The solid region has been modeled along with the fluid region as a conjugate problem. Discrete heat sources have been used to study the overall effect on convective heat transfer. Simulation of discrete heat sources was done by introducing localized heat fluxes at various locations and their magnitudes being varied. Simulations are performed for two different substrate materials namely silicon and stainless steel. The equations solved in the liquid region included the conservation of mass, conservation of momentum, and conservation of energy. In the solid region, only the energy equation, which reduced to the heat conduction equation, had to be solved. The solid-fluid interface temperature showed a strong dependence on several geometric, fluid flow, and heat transfer parameters. The Nusselt number increased with Reynolds number. For a given flow rate, a higher heat transfer coefficient was obtained with smaller slot width and lower impingement height. For a constant Reynolds number, jet impingement height and plate thickness, a wider opening of the slot provided higher average heat transfer coefficient and higher average Nusselt number. A higher average heat transfer coefficient was seen at a smaller thickness, whereas a thicker plate provided a more uniform distribution of heat transfer coefficient. Higher thermal conductivity substrates also provided a more uniform heat distribution.

Sign in / Sign up

Export Citation Format

Share Document