Properties of two- and three-dimensional separation flows at supersonic velocities

1979 ◽  
Vol 14 (3) ◽  
pp. 357-364 ◽  
Author(s):  
A. A. Zheltovodov

1970 ◽  
Vol 2 (1) ◽  
pp. 13-16 ◽  
Author(s):  
D. M. Voitenko ◽  
A. I. Zubkov ◽  
Yu. A. Panov


2021 ◽  
Author(s):  
Wei Sun

Abstract Corner separation is one type of the three-dimensional (3D) separated flows which is commonly observed at the junction of the blade suction surface and endwall of an axial compressor. The commonly used Reynolds-Averaged Navier-Stokes (RANS) turbulence models, namely Spalart-Allmaras (SA) and Menter’s Shear Stress Transport (SST) models, have been found to overpredict the size of corner separation. The physical reason is partly attributed to the underestimation of turbulence mixing between the mainstream flow and the endwall boundary-layer flow. This makes the endwall boundary layer unable to withstand the bulk adverse pressure gradients, and in turn leads to its premature separation from the endwall surface during its migration towards the endwall/blade suction surface corner. The endwall flow characteristics within the compressor stator cascade are then studied to facilitate understanding the physical mechanisms that drive the formation of 3D flow structures, and the physical reasons that lead to RANS modelling uncertainties. It is found that the insufficient near-wall boundary layer mixing is partly due to the failure of both SA and SST models to reasonably model the non-equilibrium turbulence behaviors inside the endwall boundary layer, which is caused by the boundary layer skewness. Based on the understanding of the skew-induced turbulence characteristics and its effect on mixing, a detailed effort is presented towards the physical-based modelling of the skew-induced non-equilibrium wall-bounded turbulence. The source terms in the SA and SST models that control mixing are identified and modified, in order to enhance mixing and strengthen the endwall boundary layer. The improved turbulence models are then validated against the compressor corner separation flows under various operating conditions to prove that the location and extent of the corner separation are more realistically predicted.



1966 ◽  
Vol 25 ◽  
pp. 227-229 ◽  
Author(s):  
D. Brouwer

The paper presents a summary of the results obtained by C. J. Cohen and E. C. Hubbard, who established by numerical integration that a resonance relation exists between the orbits of Neptune and Pluto. The problem may be explored further by approximating the motion of Pluto by that of a particle with negligible mass in the three-dimensional (circular) restricted problem. The mass of Pluto and the eccentricity of Neptune's orbit are ignored in this approximation. Significant features of the problem appear to be the presence of two critical arguments and the possibility that the orbit may be related to a periodic orbit of the third kind.





Author(s):  
M. Boublik ◽  
W. Hellmann ◽  
F. Jenkins

The present knowledge of the three-dimensional structure of ribosomes is far too limited to enable a complete understanding of the various roles which ribosomes play in protein biosynthesis. The spatial arrangement of proteins and ribonuclec acids in ribosomes can be analysed in many ways. Determination of binding sites for individual proteins on ribonuclec acid and locations of the mutual positions of proteins on the ribosome using labeling with fluorescent dyes, cross-linking reagents, neutron-diffraction or antibodies against ribosomal proteins seem to be most successful approaches. Structure and function of ribosomes can be correlated be depleting the complete ribosomes of some proteins to the functionally inactive core and by subsequent partial reconstitution in order to regain active ribosomal particles.



Author(s):  
P.L. Moore

Previous freeze fracture results on the intact giant, amoeba Chaos carolinensis indicated the presence of a fibrillar arrangement of filaments within the cytoplasm. A complete interpretation of the three dimensional ultrastructure of these structures, and their possible role in amoeboid movement was not possible, since comparable results could not be obtained with conventional fixation of intact amoebae. Progress in interpreting the freeze fracture images of amoebae required a more thorough understanding of the different types of filaments present in amoebae, and of the ways in which they could be organized while remaining functional.The recent development of a calcium sensitive, demembranated, amoeboid model of Chaos carolinensis has made it possible to achieve a better understanding of such functional arrangements of amoeboid filaments. In these models the motility of demembranated cytoplasm can be controlled in vitro, and the chemical conditions necessary for contractility, and cytoplasmic streaming can be investigated. It is clear from these studies that “fibrils” exist in amoeboid models, and that they are capable of contracting along their length under conditions similar to those which cause contraction in vertebrate muscles.



Author(s):  
G. Stöffler ◽  
R.W. Bald ◽  
J. Dieckhoff ◽  
H. Eckhard ◽  
R. Lührmann ◽  
...  

A central step towards an understanding of the structure and function of the Escherichia coli ribosome, a large multicomponent assembly, is the elucidation of the spatial arrangement of its 54 proteins and its three rRNA molecules. The structural organization of ribosomal components has been investigated by a number of experimental approaches. Specific antibodies directed against each of the 54 ribosomal proteins of Escherichia coli have been performed to examine antibody-subunit complexes by electron microscopy. The position of the bound antibody, specific for a particular protein, can be determined; it indicates the location of the corresponding protein on the ribosomal surface.The three-dimensional distribution of each of the 21 small subunit proteins on the ribosomal surface has been determined by immuno electron microscopy: the 21 proteins have been found exposed with altogether 43 antibody binding sites. Each one of 12 proteins showed antibody binding at remote positions on the subunit surface, indicating highly extended conformations of the proteins concerned within the 30S ribosomal subunit; the remaining proteins are, however, not necessarily globular in shape (Fig. 1).



Author(s):  
James A. Lake

The understanding of ribosome structure has advanced considerably in the last several years. Biochemists have characterized the constituent proteins and rRNA's of ribosomes. Complete sequences have been determined for some ribosomal proteins and specific antibodies have been prepared against all E. coli small subunit proteins. In addition, a number of naturally occuring systems of three dimensional ribosome crystals which are suitable for structural studies have been observed in eukaryotes. Although the crystals are, in general, too small for X-ray diffraction, their size is ideal for electron microscopy.



Sign in / Sign up

Export Citation Format

Share Document