Protective layers for optical coatings

2006 ◽  
Vol 89 (4) ◽  
pp. 315-319 ◽  
Author(s):  
J Zieba ◽  
H Shah ◽  
C Kenmore
Keyword(s):  
Optical Coatings ◽  
Protective Layers

Cross-sectional TEM specimen preparation from magneto-optical disk by ultramicrotomy

1993 ◽  
Vol 51 ◽  
pp. 236-237
Author(s):  
F. Shaapur ◽  
M.J. Kim ◽  
Seh Kwang Lee ◽  
Soon Gwang Kim
Keyword(s):  
System Development ◽  
Thin Foil ◽  
Specimen Preparation ◽  
Material System ◽  
Cross Sectional ◽  
Protective Layers ◽  
New Material ◽  
Diamond Saw ◽  
Original Production ◽  
Thick Medium

TEM characterization and microanalysis of the recording media is crucial and complementary to new material system development as well as quality control applications. Due to the type of material generally used for supporting the medium, i.e., a polymer, conventional macro- and microthinning procedures for thin foil preparation are not applicable. Ultramicrotorny (UM) is a viable option and has been employed in previous similar studies. In this work UM has been used for preparation of XTEM samples from a magneto-optical (MO) recording medium in its original production format.The as-received material system consisted of a 4-layer, 2100 Å thick medium including a 300 Å TbFeCo layer enveloped by silicon nitride protective layers supported on a 1.2 mm thick × 135 mm (5.25 in.) diameter polycarbonate disk. Recording tracks had an approximate pitch of 1.6 μm separated by 800 Å deep peripheral grooves. Using a Buehler Isomet low-speed diamond saw, 1 mm wide and 20 mm long strips were cut out of the disk along the recording tracks.

Fullerene-like Nanoparticles of WS2 as a Promising Protection from Erosive Wear of Gun Bore Nozzles

2020 ◽  
Vol 16 (1) ◽  
pp. 62-70 ◽  
Author(s):  
Narimane Rezgui ◽  
Danica Simić ◽  
Choayb Boulahbal ◽  
Dejan Micković
Keyword(s):  
Mass Loss ◽  
Solid Lubricant ◽  
Erosive Wear ◽  
Mechanical Resistance ◽  
Protective Function ◽  
Protective Layers ◽  
Total Mass Loss ◽  
Mass Losses ◽  
Before And After ◽  
Tube Life

Background: Erosive wear causes increase in the bore diameter of firearms barrels and nozzles. Most responsible factors for this erosion are friction and heat generated during the shot. Protection from erosive wear is very important for gun tube life cycle, and various protection methods are used: adding phlegmatizers in gunpowder composition or applying protective layers on the gun bore inner surface. Objective: In this research, a possibility is examined to protect the surface of a nozzle exposed to gunpowder erosion applying a layer of tungsten disulfide fullerene-like nanoparticles, IF-WS2, known as outstanding solid lubricant of a great mechanical resistance. Methods: Nanoparticles on the nozzle surface before and after the gunfire tests were observed using scanning electron microscopy/energy dispersive X-ray spectroscopy. Gunfire tests were performed on designed erosion device. Temperatures in the defined position near the affected surface were measured with thermocouples and compared for the nozzles with and without nanoprotection, as well as the nozzle mass loss after each round. Results: For the sample with IF-WS2 lower temperatures after firing and lower mass losses were observed. Mass loss after first round was 25.6% lower for the sample with protective nanoparticles layer, and the total mass loss was about 5% lower after five rounds. After the first round the nozzle without IF-WS2 was heated up to a temperature which was for 150.8°C higher than the nozzle with IF-WS2. Conclusion: Protective function of IF-WS2 is the most pronounced for the first round. The observed results encourage its further application in firearms gun bores protection.

PECVD Synthesis of Flexible Optical Coatings for Renewable Energy Applications

2015 ◽  
Vol 13 (1) ◽  
pp. 184-190 ◽  
Author(s):  
Thomas F. Fuerst ◽  
Matthew O. Reese ◽  
Colin A. Wolden
Keyword(s):  
Renewable Energy ◽  
Optical Coatings ◽  
Energy Applications

Pitting mechanism of mild steel in marginally sour environments—Part I: A parametric study based on formation of protective layers

2021 ◽  
Vol 183 ◽  
pp. 109305
Author(s):  
Wei Zhang ◽  
Bruce Brown ◽  
David Young ◽  
Gheorghe Bota ◽  
Srdjan Nesic ◽  
...  
Keyword(s):  
Mild Steel ◽  
Parametric Study ◽  
Protective Layers
Sign in / Sign up

Export Citation Format

Share Document