Method of initial functions and integral Fourier transform in some problems of the theory of elasticity

Author(s):  
Alexander V. Matrosov ◽  
Mikhail D. Kovalenko ◽  
Irina V. Menshova ◽  
Alexander P. Kerzhaev
2019 ◽  
Vol 24 (94/4) ◽  
pp. 40-48
Author(s):  
N.N. Dikhtyaruk ◽  
E.A. Poplavskaya

The article is devoted to the research of problems of contact interaction of infinite elastic stringer with two identical clamped along one edge of pre-stressed strips. In general, the research was carried out for the theory of great initial and different variants of the theory of small initial deformations within the framework of linearized theory of elasticity with the elastic potential having arbitrary structure. The integral integer-differential equations are obtained using the integral Fourier transform. Their solution is represented in the form of quasiregular infinite systems of algebraic equations. In the article alsaw was investigated the influence of the initial (residual) stresses in strips on the law of distribution of contact stresses along the line of contact with an infinite stringer.  The system is solved in a closed forms using transformation of Fourier. Expressions of stresses are represented by Fourier integrals with a simple enough structure. Influence of initial stress on the distribution of contact stresses is study and discovered the mechanical effects under the influence of concentrated loads


1989 ◽  
Vol 33 (03) ◽  
pp. 214-220
Author(s):  
Paul C. Xirouchakis ◽  
George N. Makrakis

The behavior of a long elastic strip with an edge crack resting on a liquid foundation is investigated. The faces of the crack are opened by an applied pressure loading. The deformation of the strip is considered within the framework of the linear theory of elasticity assuming plane-stress conditions. Fourier transform techniques are employed to obtain integral expressions for the stresses and displacements. The boundary-value problem is reduced to the solution of a Fredholm integral equation of the second kind. For the particular case of linear pressure loading, the stress-intensity factor is calculated and its dependence is shown on the depth of the crack relative to the thickness of the strip. Application of the present results to the problem of flexure of floating ice strips is discussed.


4open ◽  
2019 ◽  
Vol 2 ◽  
pp. 2 ◽  
Author(s):  
Mesuma K. Atakishiyeva ◽  
Natig M. Atakishiyev ◽  
Juan Loreto-Hernández

In the present work, we discuss some additional findings concerning algebraic properties of the N-dimensional discrete Fourier transform (DFT) raising and lowering difference operators, recently introduced in [Atakishiyeva MK, Atakishiyev NM (2015), J Phys: Conf Ser 597, 012012; Atakishiyeva MK, Atakishiyev NM (2016), Adv Dyn Syst Appl 11, 81–92]. In particular, we argue that the most authentic symmetrical form of discretization of the integral Fourier transform may be constructed as the discrete Fourier transforms based on the odd points N only, while in the discrete Fourier transforms on the even points N this symmetry is spontaneously broken. This heretofore undetected distinction between odd and even dimensions is shown to be intimately related with the newly revealed algebraic properties of the above-mentioned DFT raising and lowering difference operators and, of course, is very consistent with the well-known formula for the multiplicities of the eigenvalues, associated with the N-dimensional DFT. In addition, we propose a general approach to deriving the eigenvectors of the discrete number operators N(N), that avoids the above-mentioned pitfalls in the structure of each even-dimensional case N = 2L.


2021 ◽  
Vol 43 (4) ◽  
pp. 37-50
Author(s):  
V.I. Havrysh ◽  

A mathematical model of heat exchange analysis between an isotropic two-layer plate heated by a point heat source concentrated on the conjugation surfaces of layers and the environment has been developed. To do this, using the theory of generalized functions, the coefficient of thermal conductivity of the materials of the plate layers is shown as a whole for the whole system. Given this, instead of two equations of thermal conductivity for each of the plate layers and the conditions of ideal thermal contact, one equation of thermal conductivity in generalized derivatives with singular coefficients is obtained between them. To solve the boundary value problem of thermal conductivity containing this equation and boundary conditions on the boundary surfaces of the plate, the integral Fourier transform was used and as a result an analytical solution of the problem in images was obtained. An inverse integral Fourier transform was applied to this solution, which made it possible to obtain the final analytical solution of the original problem. The obtained analytical solution is presented in the form of an improper convergent integral. According to Simpson's method, numerical values of this integral are obtained with a certain accuracy for given values of layer thickness, spatial coordinates, specific power of a point heat source, thermal conductivity of structural materials of the plate and heat transfer coefficient from the boundary surfaces of the plate. The material of the first layer of the plate is copper, and the second is aluminum. Computational programs have been developed to determine the numerical values of temperature in the given structure, as well as to analyze the heat exchange between the plate and the environment due to different temperature regimes due to heating the plate by a point heat source concentrated on the conjugation surfaces. Using these programs, graphs are shown that show the behavior of curves constructed using numerical values of the temperature distribution depending on the spatial coordinates. The obtained numerical values of temperature indicate the correspondence of the developed mathematical model of heat exchange analysis between a two-layer plate with a point heat source focused on the conjugation surfaces of the layersand the environment, the real physical process.


2019 ◽  
Vol 109 ◽  
pp. 00080
Author(s):  
Volodymyr Sapehin

For the first time, for solving the wave equation, the method of the integral Fourier transform for an elastic medium under the action of variable internal pressure was used. This equation contains singularities of the second kind, which were excluded from the calculation by the half division method. The main parameters of the process of non-stationary deformation affecting the magnitude of stresses and displacements for the case of plane deformation are established.


2014 ◽  
Vol 8 (2) ◽  
pp. 83-87
Author(s):  
Roman Kulchytsky-zhyhailo ◽  
Waldemar Kołodziejczyk

Abstract A three-dimensional problem of the theory of elasticity for halfspace with multilayered coating with periodical structure is considered. The fundamental layer consists of two layers with different thicknesses and different mechanical properties. The coating is described by the homogenized model with microlocal parameters. The solution is derived by using integral Fourier transform. Calculations were conducted with the assumption of elliptical distribution of normal and tangential tractions applied to the surface of the layered system in a cir-cular area. Analysis of the stresses was restricted to the first principal stress distribution.


2021 ◽  
Vol 3 (1) ◽  
pp. 15-21
Author(s):  
Havrysh Havrysh ◽  
◽  
W. Yu. W. Yu. ◽  

A mathematical model of heat exchange analysis between an isotropic two-layer plate heated ba point heat source concentrated on the conjugation surfaces of layers and the environment has been developed. To do this, using the theory of generalized functions, the coefficient of thermal conductivity of the materials of the plate layers is shown as a whole for the wholesystem.Given this, instead of two equations of thermal conductivity for each of the plate layers and the conditions of ideal thermal contact, one equation of thermal conductivity ingeneralized derivatives with singular coefficients is obtained between them. To solve the boundary value problem of thermal conductivity containing this equation and boundary conditions on the boundary surfaces of the plate, the integral Fourier transform was used and as a result an analytical solution of the problem in images was obtained. An inverse integral Fourier transform was applied to this solution, which made it possible to obtain the final analytical solution of the original problem. The obtained analytical solution is presented in the form of an improper convergent integral. According to Simpsons method, numerical values of this integral are obtained with a certain accuracy for given values of layer thickness, spatial coordinates, specific power of a point heat source, thermal conductivity of structural materials of the plate and heat transfer coefficient from the boundary surfaces of the plate. The material of the first layer of the plate is copper, and the second is aluminum. Computational programs have been developed to determine the numerical values of temperature in the given structure, as well as to analyze the heat exchange between the plate and the environment due to different temperature regimes due to heating the plate by a point heat source concentrated on the conjugation surfaces. Using these programs, graphs are shown that show the behavior of curves constructed using numerical values of the temperature distribution depending on the spatial coordinates. The obtained numerical values of temperature indicate the correspondence of the developed mathematical model of heat exchange analysis between a two-layer plate with a point heatsource focused on the conjugation surfaces of the layersand the environment, the real physical process.


Mathematics ◽  
2018 ◽  
Vol 6 (12) ◽  
pp. 335 ◽  
Author(s):  
Jens Fischer

In previous studies we used Laurent Schwartz’ theory of distributions to rigorously introduce discretizations and periodizations on tempered distributions. These results are now used in this study to derive a validity statement for four interlinking formulas. They are variants of Poisson’s Summation Formula and connect four commonly defined Fourier transforms to one another, the integral Fourier transform, the Discrete-Time Fourier Transform (DTFT), the Discrete Fourier Transform (DFT) and the integral Fourier transform for periodic functions—used to analyze Fourier series. We prove that under certain conditions, these four Fourier transforms become particular cases of the Fourier transform in the tempered distributions sense. We first derive four interlinking formulas from four definitions of the Fourier transform pure symbolically. Then, using our previous results, we specify three conditions for the validity of these formulas in the tempered distributions sense.


Author(s):  
Jens V. Fischer

Four Fourier transforms are usually defined, the Integral Fourier transform, the Discrete-Time Fourier transform (DTFT), the Discrete Fourier transform (DFT) and the Integral Fourier transform for periodic functions. However, starting from their definitions, we show that all four Fourier transforms can be reduced to actually only one Fourier transform, the Fourier transform in the distributional sense.


Sign in / Sign up

Export Citation Format

Share Document