scholarly journals Correction to: Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation

2021 ◽  
Author(s):  
Tatiany Mafra da Silva ◽  
Anselmo Eduardo Diniz ◽  
Reginaldo Teixeira Coelho
Keyword(s):  
Experimental Evaluation ◽  
End Milling ◽  
Chip Thickness ◽  
H13 Steel ◽  
Uncut Chip Thickness ◽  
Aisi H13 Steel ◽  
Minimum Uncut Chip Thickness ◽  
Milling Operation ◽  
Aisi H13

Effect Analysis and ANN Prediction of Surface Roughness in End Milling AISI H13 Steel

2014 ◽  
Vol 800-801 ◽  
pp. 590-595
Author(s):  
Qing Zhang ◽  
Song Zhang ◽  
Jia Man ◽  
Bin Zhao
Keyword(s):  
Surface Roughness ◽  
End Milling ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Experimental Results ◽  
Depth Of Cut ◽  
H13 Steel ◽  
Aisi H13 Steel ◽  
Radial Depth ◽  
Aisi H13

Surface roughness has a significant effect on the performance of machined components. In the present study, a total of 49 end milling experiments on AISI H13 steel are conducted. Based on the experimental results, the signal-to-noise (S/N) ratio is employed to study the effects of cutting parameters (axial depth of cut, cutting speed, feed per tooth and radial depth of cut) on surface roughness. An ANN predicting model for surface roughness versus cutting parameters is developed based on the experimental results. The testing results show that the proposed model can be used as a satisfactory prediction for surface roughness.

Micro Flat End Milling Simulation Model With Instantaneous Plowing Area Prediction

2016 ◽  
Vol 4 (2) ◽  
Author(s):  
Abdolreza Bayesteh ◽  
Junghyuk Ko ◽  
Martin Byung-Guk Jun
Keyword(s):  
Feed Rate ◽  
Tool Path ◽  
End Milling ◽  
Chip Thickness ◽  
Depth Of Cut ◽  
Uncut Chip Thickness ◽  
Chip Area ◽  
Edge Radius ◽  
Wide Range ◽  
Radial Depth

There is an increasing demand for product miniaturization and parts with features as low as few microns. Micromilling is one of the promising methods to fabricate miniature parts in a wide range of sectors including biomedical, electronic, and aerospace. Due to the large edge radius relative to uncut chip thickness, plowing is a dominant cutting mechanism in micromilling for low feed rates and has adverse effects on the surface quality, and thus, for a given tool path, it is important to be able to predict the amount of plowing. This paper presents a new method to calculate plowing volume for a given tool path in micromilling. For an incremental feed rate movement of a micro end mill along a given tool path, the uncut chip thickness at a given feed rate is determined, and based on the minimum chip thickness value compared to the uncut chip thickness, the areas of plowing and shearing are calculated. The workpiece is represented by a dual-Dexel model, and the simulation properties are initialized with real cutting parameters. During real-time simulation, the plowed volume is calculated using the algorithm developed. The simulated chip area results are qualitatively compared with measured resultant forces for verification of the model and using the model, effects of cutting conditions such as feed rate, edge radius, and radial depth of cut on the amount of shearing and plowing are investigated.

Sign in / Sign up

Export Citation Format

Share Document