Residual least-squares collocation: use of covariance matrices from high-resolution global geopotential models

2019 ◽  
Vol 93 (9) ◽  
pp. 1739-1757
Author(s):  
Martin Willberg ◽  
Philipp Zingerle ◽  
Roland Pail
2022 ◽  
Vol 9 ◽  
Author(s):  
Hamad Al-Ajami ◽  
Ahmed Zaki ◽  
Mostafa Rabah ◽  
Mohamed El-Ashquer

A new gravimetric geoid model, the KW-FLGM2021, is developed for Kuwait in this study. This new geoid model is driven by a combination of the XGM2019e-combined global geopotential model (GGM), terrestrial gravity, and the SRTM 3 global digital elevation model with a spatial resolution of three arc seconds. The KW-FLGM2021 has been computed by using the technique of Least Squares Collocation (LSC) with Remove-Compute-Restore (RCR) procedure. To evaluate the external accuracy of the KW-FLGM2021 gravimetric geoid model, GPS/leveling data were used. As a result of this evaluation, the residual of geoid heights obtained from the KW-FLGM2021 geoid model is 2.2 cm. The KW-FLGM2021 is possible to be recommended as the first accurate geoid model for Kuwait.


2021 ◽  
Vol 95 (8) ◽  
Author(s):  
P. Zingerle ◽  
R. Pail ◽  
M. Willberg ◽  
M. Scheinert

AbstractWe present a partition-enhanced least-squares collocation (PE-LSC) which comprises several modifications to the classical LSC method. It is our goal to circumvent various problems of the practical application of LSC. While these investigations are focused on the modeling of the exterior gravity field the elaborated methods can also be used in other applications. One of the main drawbacks and current limitations of LSC is its high computational cost which grows cubically with the number of observation points. A common way to mitigate this problem is to tile the target area into sub-regions and solve each tile individually. This procedure assumes a certain locality of the LSC kernel functions which is generally not given and, therefore, results in fringe effects. To avoid this, it is proposed to localize the LSC kernels such that locality is preserved, and the estimated variances are not notably increased in comparison with the classical LSC method. Using global covariance models involves the calculation of a large number of Legendre polynomials which is usually a time-consuming task. Hence, to accelerate the creation of the covariance matrices, as an intermediate step we pre-calculate the covariance function on a two-dimensional grid of isotropic coordinates. Based on this grid, and under the assumption that the covariances are sufficiently smooth, the final covariance matrices are then obtained by a simple and fast interpolation algorithm. Applying the generalized multi-variate chain rule, also cross-covariance matrices among arbitrary linear spherical harmonic functionals can be obtained by this technique. Together with some further minor alterations these modifications are implemented in the PE-LSC method. The new PE-LSC is tested using selected data sets in Antarctica where altogether more than 800,000 observations are available for processing. In this case, PE-LSC yields a speed-up of computation time by a factor of about 55 (i.e., the computation needs only hours instead of weeks) in comparison with the classical unpartitioned LSC. Likewise, the memory requirement is reduced by a factor of about 360 (i.e., allocating memory in the order of GB instead of TB).


2021 ◽  
Vol 1715 ◽  
pp. 012029
Author(s):  
Sergey Golushko ◽  
Vasily Shapeev ◽  
Vasily Belyaev ◽  
Luka Bryndin ◽  
Artem Boltaev ◽  
...  

2020 ◽  
Vol 10 (1) ◽  
pp. 53-61
Author(s):  
E. Mysen

AbstractA network of pointwise available height anomalies, derived from levelling and GPS observations, can be densified by adjusting a gravimetric quasigeoid using least-squares collocation. The resulting type of Corrector Surface Model (CSM) is applied by Norwegian surveyors to convert ellipsoidal heights to normal heights expressed in the official height system NN2000. In this work, the uncertainty related to the use of a CSM to predict differences in height anomaly was sought. As previously, the application of variograms to determine the local statistical properties of the adopted collocation model led to predictions that were consistent with their computed uncertainties. For the purpose of predicting height anomaly differences, the effect of collocation was seen to be moderate in general for the small spatial separations considered (< 10 km). However, the relative impact of collocation could be appreciable, and increasing with distance, near the network. At last, it was argued that conservative uncertainties of height anomaly differences may be obtained by rescaling output of a grid interpolation by \sqrt \Delta, where Δ is the spatial separation of the two locations for which the difference is sought.


2020 ◽  
Author(s):  
Lian Duan ◽  
Alejandro Valenciano ◽  
Nizar Chemingui

2013 ◽  
Vol 694-697 ◽  
pp. 2545-2549 ◽  
Author(s):  
Qian Wen Cheng ◽  
Lu Ben Zhang ◽  
Hong Hua Chen

The key point researched by many scholars in the field of surveying and mapping is how to use the given geodetic height H measured by GPS to obtain the normal height. Although many commonly-used fitting methods have solved many problems, they all value the pending parameters as the nonrandom variables. Figuring out the best valuations, according to the traditional least square principle, only considers its trend or randomness, which is theoretically incomprehensive and have limitations in practice. Therefore, a method is needed not only considers its trend but also takes randomness into account. This method is called the least squares collocation.


Geophysics ◽  
2004 ◽  
Vol 69 (2) ◽  
pp. 378-385 ◽  
Author(s):  
Aristotelis Dasios ◽  
Clive McCann ◽  
Timothy Astin

We minimize the effect of noise and increase both the reliability and the resolution of attenuation estimates obtained from multireceiver full‐waveform sonics. Multiple measurements of effective attenuation were generated from full‐waveform sonic data recorded by an eight‐receiver sonic tool in a gas‐bearing sandstone reservoir using two independent techniques: the logarithmic spectral ratio (LSR) and the instantaneous frequency (IF) method. After rejecting unstable estimates [receiver separation <2 ft (0.61 m)], least‐squares inversion was used to combine the multiple estimates into high‐resolution attenuation logs. The procedure was applied to raw attenuation data obtained with both the LSR and IF methods, and the resulting logs showed that the attenuation estimates obtained for the maximum receiver separation of 3.5 ft (1.07 m) provide a smoothed approximation of the high‐resolution measurements. The approximation is better for the IF method, with the normalized crosscorrelation factor between the low‐ and high‐resolution logs being 0.90 for the IF method and 0.88 for the LSR method.


Sign in / Sign up

Export Citation Format

Share Document