Microstructure and dielectric properties of pulsed-laser-deposited CaCu3Ti4O12 thin films on LaNiO3 buffered Pt/Ti/SiO2/Si substrates

AbstractPZT thin films were prepared by pulsed laser deposition on unheated Ptcoated Si substrates. As deposited, the films were amorphous. Films crystallized at 550 - 600 °C to produce predominantly crystalline ferroelectric PZT. Crystallization of the amorphous material was accompanied by a linear shrinkage of ∼2 %, as manifested in development of cracks in the film. Spacing, width and morphology of larger cracks followed a regular progression with decreasing film thickness. For film thicknesses less than 500 runm, much of the shrinkage was taken up by small, closely-spaced cracks of local extent. Implications for measurement of PZT thin film ferroelectric properties and processing are discussed.

Download Full-text

The Dielectric Properties of Pb0.65Ba0.35ZrO3 Thin Films

Key Engineering Materials ◽

10.4028/www.scientific.net/kem.306-308.1313 ◽

2006 ◽

Vol 306-308 ◽

pp. 1313-1318

Author(s):

J.S. Kim ◽

B.H. Park ◽

T.J. Choi ◽

Se Hyun Shin ◽

Jae Chul Lee ◽

...

Keyword(s):

Thin Film ◽

Thin Films ◽

Dielectric Properties ◽

Dielectric Loss ◽

Deposition Temperature ◽

Pulsed Laser ◽

Laser Deposition ◽

Axis Orientation ◽

Capacitance Voltage ◽

Bst Thin Film

Pb0.65Ba0.35ZrO3 (PBZ) thin films have been grown on MgO (001) substrates by pulsed-laser deposition (PLD). We have compared the structural and dielectric properties of PBZ films grown at various temperatures. A highly c-axis orientation has appeared at PBZ film grown at the deposition temperature of 550oC. The c-axis oriented PBZ film has also shown the largest tunability among all the PBZ films in capacitance-voltage measurements. The tunability and dielectric loss of the PBZ film was 20% and 0.00959, respectively. In addition, we have compared the temperature coefficient of capacitance (TCC) of a PBZ film with that of a Ba0.5Sr0.5TiO3 (BST) film which is a well-known material applicable to tunable microwave devices. We have confirmed that TCC value of a PBZ thin film was three-times smaller than that of a BST thin film.

Download Full-text

Ferroelectric Properties and Microstructures of Bi4-xDyxTi3O12 Thin Films

Key Engineering Materials ◽

10.4028/www.scientific.net/kem.633.378 ◽

2014 ◽

Vol 633 ◽

pp. 378-381

Author(s):

Bei Li ◽

X.B. Liu ◽

M. Chen ◽

X.A. Mei

Keyword(s):

Thin Films ◽

Electrical Properties ◽

Layered Structure ◽

Remanent Polarization ◽

Single Phase ◽

Ferroelectric Properties ◽

Pulsed Laser ◽

Laser Deposition ◽

Deposition Technique ◽

Si Substrates

Dy-doped Bi4Ti3O12 thin films were fabricated on Pt/Ti/SiO2/Si substrates by pulsed laser deposition technique, and the structures and electrical properties of the films were investigated. XRD results indicated that all of Bi4-xDyxTi3O12 films consisted of single phase of a bismuth-layered structure with well-developed rod-like grains. The remanent polarization ( Pr ) and coercive field (Ec) of the Bi4-xDyxTi3O12 Film with x=0.75 were 25μC/cm2 and 85KV/cm , respectively.

Download Full-text