Single-axis low acceleration sensing using an enhanced piezoelectric vibration energy harvester

2021 ◽  
Author(s):  
Bapi Debnath ◽  
R. Kumar
Keyword(s):  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Piezoelectric Vibration Energy Harvester ◽  
Piezoelectric Vibration

Bio-inspired bistable piezoelectric vibration energy harvester: Design and experimental investigation

Energy ◽  
2021 ◽  
Vol 228 ◽  
pp. 120595
Author(s):  
Jiaxi Zhou ◽  
Xuhui Zhao ◽  
Kai Wang ◽  
Yaopeng Chang ◽  
Daolin Xu ◽  
...  
Keyword(s):  
Experimental Investigation ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Piezoelectric Vibration Energy Harvester ◽  
Piezoelectric Vibration

scholarly journals Theoretical and Experimental Studies on MEMS Variable Cross-Section Cantilever Beam Based Piezoelectric Vibration Energy Harvester

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 772
Author(s):  
Xianming He ◽  
Dongxiao Li ◽  
Hong Zhou ◽  
Xindan Hui ◽  
Xiaojing Mu
Keyword(s):  
Power Density ◽  
Cantilever Beam ◽  
Cross Section ◽  
Energy Harvester ◽  
Variable Cross Section ◽  
Vibration Energy ◽  
Variable Cross ◽  
Vibration Energy Harvester ◽  
Piezoelectric Vibration Energy Harvester ◽  
Piezoelectric Vibration

The piezoelectric vibration energy harvester (PVEH) based on the variable cross-section cantilever beam (VCSCB) structure has the advantages of uniform axial strain distribution and high output power density, so it has become a research hotspot of the PVEH. However, its electromechanical model needs to be further studied. In this paper, the bidirectional coupled distributed parameter electromechanical model of the MEMS VCSCB based PVEH is constructed, analytically solved, and verified, which laid an important theoretical foundation for structural design and optimization, performance improvement, and output prediction of the PVEH. Based on the constructed model, the output performances of five kinds of VCSCB based PVEHs with different cross-sectional shapes were compared and analyzed. The results show that the PVEH with the concave quadratic beam shape has the best output due to the uniform surface stress distribution. Additionally, the influence of the main structural parameters of the MEMS trapezoidal cantilever beam (TCB) based PVEH on the output performance of the device is theoretically analyzed. Finally, a prototype of the Aluminum Nitride (AlN) TCB based PVEH is designed and developed. The peak open-circuit voltage and normalized power density of the device can reach 5.64 V and 742 μW/cm3/g2, which is in good agreement with the theoretical model value. The prototype has wide application prospects in the power supply of the wireless sensor network node such as the structural health monitoring system and the Internet of Things.

Analysis of a Curved Beam MEMS Piezoelectric Vibration Energy Harvester

2010 ◽  
Vol 139-141 ◽  
pp. 1578-1581 ◽  
Author(s):  
Yong Zhou ◽  
Yong Dong ◽  
Shi Li
Keyword(s):  
Energy Harvester ◽  
Dynamic Performance ◽  
Beam Theory ◽  
Vibration Energy ◽  
Curved Beam ◽  
Vibration Energy Harvester ◽  
Coupling Vibration ◽  
Structural Assembly ◽  
Piezoelectric Vibration Energy Harvester ◽  
Piezoelectric Vibration

An analytical model is derived for obtaining the dynamic performance of a thin curved composite piezoelectric beam with variable curvatures for the MEMS piezoelectric vibration energy harvester. The plane curved beam theory with rectangular section is employed to explore the bending and twisting coupling vibration characteristics. In order to satisfy the most available environmental frequencies, which are on the order of 1000Hz, the parameters of the spiraled composite beam bonded with piezoelectric on the surfaces are investigated to provide a method of how to design low resonance beams while keeping the compacting structural assembly. The results indicate the adoption of ANSYS® software to carry out the MEMS piezoelectric vibration energy harvester’s numerical simulation can improve the accuracy of the harvester designing and manufacturing consumedly. And the simulation data also provide a theory analysis foundation for the engineering, design and application of harvester.

Nonlinear piezoelectric vibration energy harvester with frequency-tuned impacting resonators for improving broadband performance at low frequencies

2019 ◽  
Vol 28 (2) ◽  
pp. 025025 ◽  
Author(s):  
Rolanas Dauksevicius ◽  
Rimvydas Gaidys ◽  
Vytautas Ostasevicius ◽  
Robert Lockhart ◽  
Andres Vásquez Quintero ◽  
...  
Keyword(s):  
Energy Harvester ◽  
Vibration Energy ◽  
Low Frequencies ◽  
Vibration Energy Harvester ◽  
Piezoelectric Vibration Energy Harvester ◽  
Piezoelectric Vibration
Sign in / Sign up

Export Citation Format

Share Document