Dynamic Undrained Shear Strength Behavior of Bentonite–Grouted Sand

2019 ◽  
Vol 37 (5) ◽  
pp. 4551-4563
Author(s):  
Amir Noori ◽  
Reza Ziaie Moayed ◽  
Mahmud Hassanlourad
Keyword(s):  
Shear Strength ◽  
Undrained Shear Strength ◽  
Strength Behavior ◽  
Undrained Shear

scholarly journals Shrinkage and Strength Behavior of Highly Plastic Clay Improved by Brick Dust

2020 ◽  
Vol 26 (5) ◽  
pp. 95-105
Author(s):  
Ali F. Al-Baidhani ◽  
Abbas J. Al-Taie
Keyword(s):  
Shear Strength ◽  
Dry Weight ◽  
Undrained Shear Strength ◽  
Engineering Properties ◽  
Compression Tests ◽  
Engineering Structures ◽  
Plastic Clay ◽  
Strength Behavior ◽  
Undrained Shear ◽  
Brick Dust

Highly plastic soils exhibit unfavorited properties upon saturation, which produce different defects in engineering structures. Attempts were made by researchers to proffer solutions to these defects by experimenting in practical ways. This included various materials that could possibly improve the soil engineering properties and reduce environmental hazards. This paper investigates the strength behavior of highly plastic clay stabilized with brick dust. The brick dust contents were 10%, 20%, and 30% by dry weight of soil. A series of linear shrinkage and unconfined compression tests were carried out to study the effect of brick dust on the quantitative amount of shrinkage experienced by highly plastic clay and the undrained shear strength. The effect of curing on soil shear strength was included in this paper. It was found that the critical behavior of highly plastic soil can be mitigated by mixing with 20% or 30% of brick dust. The undrained shear strength of highly plastic clay mixed with brick dust increased with the increase of brick dust content up to 20%. It was affected by the curing period. The best improvement was achieved when the optimum content of brick dust was 20%. Finally, seven days of curing improved the undrained shear strength with over 100%.

scholarly journals Evaluation of Undrained Shear Strength of Miocene Clay from the Weight Sounding Test (WST)

2017 ◽  
Vol 62 (2) ◽  
pp. 367-384
Author(s):  
Sebastian Olesiak
Keyword(s):  
Shear Strength ◽  
Field Testing ◽  
Field Investigation ◽  
Undrained Shear Strength ◽  
Cohesive Soils ◽  
Strength Parameters ◽  
Additional Measurement ◽  
Carpathian Foredeep ◽  
Innovative Solution ◽  
Undrained Shear

Abstract Soil strength parameters needed for the calculation of bearing capacity and stability are increasingly determined from field testing. This paper presents a method to determine the undrained shear strength cuWST of the soil, based on the Weight Sounding Test (WST). The innovative solution which allows for a significant reduction of equipment needed for geotechnical field investigation is presented. The proposed method is based on an additional measurement of the torque during testing. It then becomes possible to estimate the undrained shear strength, cuWST of the soil, using the correlation given in this paper. The research results presented in this paper were carried out on selected cohesive soils, Miocene clays from the Carpathian Foredeep.

Sign in / Sign up

Export Citation Format

Share Document