Studies on the aqueous synthesis process of anhydrous uranyl chloride by U3O8, hydrochloric acid and H2O2

Author(s):  
Yuhe Li ◽  
Qi Lei ◽  
Zhixin Xiong ◽  
Wei Huang ◽  
Qingnuan Li
2013 ◽  
Vol 448-453 ◽  
pp. 464-467 ◽  
Author(s):  
Meng Meng Qi ◽  
Ran Guo ◽  
Meng Su ◽  
Xiao Xue Cheng ◽  
Ling Zhang

By Series of comparative experiments, Factors of influencing the yield of biurea which is prepared from the condensation reaction between hydrazine hydrate and urea are studied, such as pH value, ratio of urea to hydrazine hydrate, temperature of reaction solution, reaction time and acid addition order. Under the optimum process conditions, the yield of biurea can reach over 97%, the biurea produced by hydrochloric acid method avoids large amounts of complex salt wastewater in condensation reaction of sulfuric acid method, and make the production process of biurea tends to be more environmentally friendly.


Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2112 ◽  
Author(s):  
Meng Wu ◽  
Bingxin Wang ◽  
Qianku Hu ◽  
Libo Wang ◽  
Aiguo Zhou

The effect of etching solution on the synthesis process of two-dimensional vanadium carbide (V2C MXene) was researched. Three etching solutions were used to etch ternary carbide V2AlC at 90 °C. The three solutions were: lithium fluoride + hydrochloric acid (LiF + HCl), sodium fluoride + hydrochloric acid (LiF + HCl), and potassium fluoride + hydrochloric acid (KF + HCl). It was found that only NaF + HCl solution was effective for synthesizing highly pure V2C MXene. The existence of sodium (Na+) and chloridion (Cl−) in etching solution was essential for the synthesis. The thermal stability of the as-prepared V2C MXene in argon or air was studied. From thermogravimetry and differential thermal analysis, V2C MXene was found to be stable in argon atmosphere at a temperature of up to 375 °C. As the temperature increased, V2C MXene was gradually oxidized to form nanoparticles composed of vanadium trioxide (V2O3) and a part of V2C MXene was broken and transformed to vanadium carbide (V8C7) at 1000 °C. In air atmosphere, V2C MXene was stable at 150 °C. At 1000 °C, V2C MXene was oxidized to form vanadium pentoxide (V2O5).


RSC Advances ◽  
2015 ◽  
Vol 5 (112) ◽  
pp. 92778-92787 ◽  
Author(s):  
Zhikai Yan ◽  
Jianming Gao ◽  
Yang Li ◽  
Mei Zhang ◽  
Min Guo

Spinel metal-doped magnesium ferrite (MgFe2O4) was synthesized using an atmospheric hydrochloric acid leaching process and hydrothermal synthesis process from saprolite laterite.


MRS Advances ◽  
2019 ◽  
Vol 4 (07) ◽  
pp. 399-404
Author(s):  
Julio A. Rivera ◽  
Sonia J. Bailón-Ruiz ◽  
Oscar J. Perales-Perez

AbstractThe actual incorporation of dopant species into the ZnS Quantum Dots (QDs) host lattice will induce structural defects evidenced by a red shift in the corresponding exciton. The doping should create new intermediate energetic levels between the valence and conduction bands of the ZnS and affect the electron-hole recombination. These trap states would favour the energy transfer processes involved with the generation of cytotoxic radicals, so-called Reactive Oxygen Species, opening the possibility to apply these nanomaterials in cancer research. Any synthesis approach should consider the direct formation of the QDs in biocompatible medium. Accordingly, the present work addresses the microwave-assisted aqueous synthesis of pure and doped ZnS QDs. As-synthesized quantum dots were fully characterized on a structural, morphological and optical viewpoint. UV-Vis analyzes evidenced the excitonic peaks at approximately 310 nm, 314 nm and 315 nm for ZnS, Cu-ZnS and Mn-ZnS, respectively, Cu/Zn and Mn/Zn molar ratio was 0.05%. This indicates the actual incorporation of the dopant species into the host lattice. In addition, the Photoluminescence spectrum of non-doped ZnS nanoparticles showed a high emission peak that was red shifted when Mn2+ or Cu2+ were added during the synthesis process. The main emission peak of non-doped ZnS, Cu-doped ZnS and Mn-doped ZnS were observed at 438 nm, 487 nm and 521 nm, respectively. Forthcoming work will address the capacity of pure and Cu-, Mn-ZnS quantum dots to generate cytotoxic Reactive Oxygen Species for cancer treatment applications.


2019 ◽  
Vol 394 ◽  
pp. 79-83
Author(s):  
Chi Hoon Kim ◽  
Vaibhav Lokhande ◽  
Taek Soo Ji

In this study, the characteristics of WO3 prepared with acidic solution were analyzed. The acidic solution was prepared by using hydrochloric acid and sulfuric acid as the solutions to be added during the hydrothermal synthesis process. SEM, XRD and electrochemical characteristics tests were performed based on the prepared samples. Samples prepared in hydrochloric acid (W1) solution can identify platelet crystals and nanospheres, and samples made from sulfuric acid (W2) solutions can identify nanospheres and nanocubes. From the XRD data, it was confirmed that all of the diffraction peaks had a hexagonal phase. Electrochemical properties showed good rate capability of W1 samples but low capacitance and W2 samples showed relatively high capacitances.


Author(s):  
W. H. Zucker ◽  
R. G. Mason

Platelet adhesion initiates platelet aggregation and is an important component of the hemostatic process. Since the development of a new form of collagen as a topical hemostatic agent is of both basic and clinical interest, an ultrastructural and hematologic study of the interaction of platelets with the microcrystalline collagen preparation was undertaken.In this study, whole blood anticoagulated with EDTA was used in order to inhibit aggregation and permit study of platelet adhesion to collagen as an isolated event. The microcrystalline collagen was prepared from bovine dermal corium; milling was with sharp blades. The preparation consists of partial hydrochloric acid amine collagen salts and retains much of the fibrillar morphology of native collagen.


Author(s):  
X. Lin ◽  
X. K. Wang ◽  
V. P. Dravid ◽  
J. B. Ketterson ◽  
R. P. H. Chang

For small curvatures of a graphitic sheet, carbon atoms can maintain their preferred sp2 bonding while allowing the sheet to have various three-dimensional geometries, which may have exotic structural and electronic properties. In addition the fivefold rings will lead to a positive Gaussian curvature in the hexagonal network, and the sevenfold rings cause a negative one. By combining these sevenfold and fivefold rings with sixfold rings, it is possible to construct complicated carbon sp2 networks. Because it is much easier to introduce pentagons and heptagons into the single-layer hexagonal network than into the multilayer network, the complicated morphologies would be more common in the single-layer graphite structures. In this contribution, we report the observation and characterization of a new material of monolayer graphitic structure by electron diffraction, HREM, EELS.The synthesis process used in this study is reported early. We utilized a composite anode of graphite and copper for arc evaporation in helium.


Sign in / Sign up

Export Citation Format

Share Document