Passive sampling technique for atmospheric 14C measurements

Author(s):  
B. Arun ◽  
S. Viswanathan ◽  
M. Menaka ◽  
R. Venkatesan ◽  
M. T. Jose ◽  
...  
2020 ◽  
Author(s):  
Nina Mali ◽  
Anja Koroša ◽  
Primož Auersperger

<p>Micro-organic (MO) compounds have been recognized as an important factor in environmental pollution. Developments in a range of analytical techniques are expanding the number of MOs that can be detected in groundwater. They may not be new contaminants, but recently detected using improved sampling and analytical methods. Monitoring programmes for groundwater are largely based on the collection of grab (spot) samples. One of the methods to determine the presence of organic compounds in groundwater v can also be passive sampling. Contrary to grab sampling, passive sampling is less sensitive to accidental extreme variations of the organic compounds concentrations in groundwater and it also allows determination of a large range of contaminants at once. A passive sampler can cover a long sampling period, integrating the pollutant concentration over time. This paper presents the application of the passive sampling technique for monitoring organic pollutants within the four major alluvial aquifers in Slovenia used for water supply. Passive samples were analyzed by gas chromatography mass spectrometry (GC-MS). For the interpretation of chromatograms, the AMDIS deconvolution was used. The deconvolution was covered by the GC-MS library with retention times for 921 organic contaminants from Agilent USA, as well as by the NIST 2008 library of mass spectra. Most frequently detected MO substances were classified in different pollutant groups with respect to their origin (urban source, agriculture or industry). Based on the results, a comparison of the presence of MOs in the present aquifers was made. Passive sampling with active carbon fibres was proved to be an appropriate method for monitoring micro-organic pollutants in groundwater.</p>


2020 ◽  
Vol 20 ◽  
pp. 101073 ◽  
Author(s):  
Qiushi Duan ◽  
Luchun Duan ◽  
Yanju Liu ◽  
Ravi Naidu ◽  
Hao Zhang ◽  
...  

Water ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2808
Author(s):  
Zhe Li ◽  
Maria Librada Chu ◽  
Lowell Gentry ◽  
Ying Li ◽  
Corey Mitchell ◽  
...  

Tile drainage waters carry considerable loads of phosphorus (P) from agricultural fields to rivers and streams in the Midwestern U.S. An innovative and economical approach to monitor dissolved reactive P (DRP) flux in tile waters is needed to understand the extent of P loss in field-scale. In this study, a passive sampling technique was developed using iron oxide-coated polyacrylic/polystyrene anion exchange resins (hybrid resins) a P sink. Laboratory batch adsorption isotherm and kinetic experiments indicated that the hybrid resins had high P adsorption capacity (7.69–19.84 mg/g) and high kinetic performance. The passive sampling method with field-calibrated hybrid polyacrylic resin and hybrid polystyrene resins (sampling rate: 0.1351 and 0.0763 L/h, respectively) predicted the average DRP concentrations of 0.006–0.020 mg/L, which did not differ significantly (p > 0.05) from the auto-sampling data. A rapid increase in DRP concentration during storm events and subsequent flooding events was also predicted well. In conclusion, a passive detection method using iron oxide coated hybrid resins can be recommended for monitoring seasonally fluctuating DRP flux in agricultural waters as long as the hybrid resins are well-calibrated under specific field conditions (e.g., flow rate and concentration range).


Marine Drugs ◽  
2010 ◽  
Vol 8 (4) ◽  
pp. 1263-1272 ◽  
Author(s):  
Zhaoxin Li ◽  
Guo Mengmeng ◽  
Yang Shouguo ◽  
Wang Qingyin ◽  
Tan Zhijun

2017 ◽  
Vol 51 (16) ◽  
pp. 9101-9108 ◽  
Author(s):  
Changsheng Guo ◽  
Tingting Zhang ◽  
Song Hou ◽  
Jiapei Lv ◽  
Yuan Zhang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document