On the inference of viscoelastic constants from stress relaxation experiments

2019 ◽  
Vol 24 (1) ◽  
pp. 1-24 ◽  
Author(s):  
Kumar Vemaganti ◽  
Sandeep Madireddy ◽  
Sayali Kedari
2014 ◽  
Vol 563 ◽  
pp. 48-52
Author(s):  
Lei Chen ◽  
Zhi Xin Yu ◽  
Wei Ping Cui ◽  
Li Juan Qin

Development of normal stress in the direction perpendicular to the asphalt mixture is an important feature of the nonlinear viscoelastic behavior of asphalt binders. In this paper, this phenomenon was studied with the help of stress-relaxation experiments in torsion.  Results indicate that stress relaxation test by controlling strain could be used to evaluate the stress relaxation ability of asphalt mixture. With the aging degree of asphalt mixtures increased, the low temperature cracking resistance got worse; the higher the temperature is, the faster the stress relaxed; the smaller the initial strain, the worse the stress relaxation ability also. The viscoelasticity of asphalt mixture could be simulated by exponential model fractional and the experiments well supported the modeling results.


Author(s):  
Declan Shannon ◽  
Brian J Love

Quasi-static tensile and stress relaxation experiments were performed on several cloth-based and segmented elastomeric tapes, and the results were analyzed using viscoelastic models. The cloth tape modulus of elasticity was ∼340 MPa, while those of the kinesio tapes ranged from ∼15 to 20 MPa. The cloth tapes was also stronger and more brittle. Viscoelastic modeling of the stress relaxation behavior was done using a Zener model for the cloth tapes and a 5-element model for the kinesio tapes. The cloth tape relaxed by ∼20%, while the kinesio tapes relaxed by ∼40% of the applied maximum stress in approximately 300-s as demonstrated by viscoelastic modeling and constant strain experiments. The overall amount of long-term compressive force delivered by kinesio tapes might be inadequate for some applications, but they are more forgiving in how they are deployed.


1960 ◽  
Vol 33 (1) ◽  
pp. 72-77
Author(s):  
A. Mercurio ◽  
A. V. Tobolsky

Abstract Deterioration of many vulcanized hydrocarbon rubbers is known to be due to reaction with molecular oxygen. Such a process is independent of oxygen concentration down to several mm of oxygen pressure and hence proceeds quite readily in an air atmosphere provided that experiments are conducted with thin enough samples to eliminate oxygen diffusion effects. Two chemically distinct loci for attack by oxygen are available. These are the crosslinked sites which are added during the vulcanization process and the network chains which are essentially the same as in the unvulcanized material. The prime objective of this study is to show clearly that vulcanized natural rubber suffers oxidative scission predominantly along the polyisoprene chains and not at the crosslinked sites as proposed by Berry and Watson. Other literature has appeared which indicates that this important point needs further clarification. Stress relaxation experiments, which measure the rate of breaking of the weakest chemical bonds recurring throughout the structure, have been utilized. If the crosslinks are oxidized, then similar rates of scission should be obtained for different chain structures so long as the common crosslink is present in all of them. On the other hand, if chains are oxidized, then rates of scission should be essentially independent of the crosslinking agent used but rather depend markedly on each chain structure. The five chain structures used in this study are depicted in Table I. In each case at least a few per cent of double bond-containing segments are present in the main chain to allow for ordinary chemical vulcanization methods. All of these have been crosslinked by sulfur and by a nonsulfur containing agent.


Author(s):  
Kevin L. Troyer ◽  
Christian M. Puttlitz

Connective soft tissues exhibit time-dependent, or viscoelastic, behavior. In order to characterize this behavior, stress relaxation experiments can be performed to determine the tissue’s relaxation modulus. Theoretically, the relaxation modulus describes the stress relaxation behavior of the tissue in response to an instantaneous (step) application of strain. However, a step increase in strain is experimentally impossible and a pure ramp load is intractable due to the inertial limitations of the testing device. Even small deviations from an instantaneous strain application may cause significant errors in the determination of the tissue’s relaxation modulus.


Sign in / Sign up

Export Citation Format

Share Document