Hydration of cyclohexene over zeolite ZSM-5: improved catalyst performance by alkali treatment

2016 ◽  
Vol 119 (2) ◽  
pp. 671-683 ◽  
Author(s):  
Fanjun Meng ◽  
Yaquan Wang ◽  
Shougui Wang ◽  
Shuhai Wang
Keyword(s):  
Alkali Treatment ◽  
Hydration Of Cyclohexene

Kinetic Adsorption of Humic Acids Mixture Obtained from Microalgae on Exfoliated Graphite Nanoplatelets

2018 ◽  
Vol 69 (1) ◽  
pp. 191-195
Author(s):  
Elena Radu ◽  
Elena Emilia Oprescu ◽  
Cristina Emanuela Enascuta ◽  
Catalina Calin ◽  
Rusandica Stoica ◽  
...  
Keyword(s):  
Humic Acid ◽  
Humic Acids ◽  
Alkali Treatment ◽  
Exfoliated Graphite ◽  
Acid Mixture ◽  
Acidic Ph ◽  
Graphite Nanoplatelets ◽  
Mixture Concentration ◽  
Ft Ir ◽  
Exfoliated Graphite Nanoplatelets

The dehydration of polysaccharides fraction in the presence of acid catalysts, is a chemical process in which results as secondary product humic matter. In our work, the humic acid mixture was for the first time based on our knowledge extracted from defatted microalgae biomass rich in polysaccharides by standard alkali treatment, followed by precipitation at acidic pH. The dried humic acid mixture has been characterized using infrared spectroscopic measurements (FT-IR). Exfoliated graphite nanoplatelets (xGnP) were used as new adsorbents for this type of humic acids mixture, their adsorption being investigated. The effect of several parameters such as: contact time, concentration of humic acid mixture, concentration of xGnP, temperature and pH of the solutions were studied. The process of adsorption took place with good results, in the following conditions: at a concentration of humic acid mixture of 18.6 mg L-1, an xGnP amount of 0.01 mg in 25 mL of solution, at a temperature of 25 �� and at acidic pH values, in aqueous solution.

Influence of alkali treatment on flax fiber for use as reinforcements in polylactide stereocomplex composites

2015 ◽  
Vol 55 (11) ◽  
pp. 2553-2558 ◽  
Author(s):  
Huihui Zhang ◽  
Ruihao Ming ◽  
Gesheng Yang ◽  
Yuzeng Li ◽  
Qiao Li ◽  
...  
Keyword(s):  
Alkali Treatment ◽  
Flax Fiber

Green, efficient extraction of bamboo hemicellulose using freeze-thaw assisted alkali treatment

2021 ◽  
Vol 333 ◽  
pp. 125107
Author(s):  
Jing Li ◽  
Zhaomeng Liu ◽  
Chengqi Feng ◽  
Xiaoying Liu ◽  
Fangyu Qin ◽  
...  
Keyword(s):  
Alkali Treatment ◽  
Freeze Thaw ◽  
Efficient Extraction

Optimization of Alkali Treatment Process Parameters for Kenaf Fiber: Experiments Design

2020 ◽  
pp. 1-10
Author(s):  
R. Sathish Kumar ◽  
Nivedhitha Muralidharan ◽  
Ravishankar Sathyamurthy
Keyword(s):  
Process Parameters ◽  
Treatment Process ◽  
Alkali Treatment ◽  
Kenaf Fiber

scholarly journals Influence of Alkali Treatment on the Microstructure and Mechanical Properties of Coir and Abaca Fibers

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2636
Author(s):  
Petr Valášek ◽  
Miroslav Müller ◽  
Vladimír Šleger ◽  
Viktor Kolář ◽  
Monika Hromasová ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Alkali Treatment ◽  
Fiber Surface ◽  
Cellulose Fibers ◽  
Sem Analysis ◽  
Experimental Program ◽  
Time Interval ◽  
The European Union ◽  
Vegetable Fibers

Composite materials with natural fillers have been increasingly used as an alternative to synthetically produced materials. This trend is visible from a representation of polymeric composites with natural cellulose fibers in the automotive industry of the European Union. This trend is entirely logical, owing to a preference for renewable resources. The experimental program itself follows pronounced hypotheses and focuses on a description of the mechanical properties of untreated and alkali-treated natural vegetable fibers, coconut and abaca fibers. These fibers have great potential for use in composite materials. The results and discussion sections contribute to an introduction of an individual methodology for mechanical property assessment of cellulose fibers, and allows for a clear definition of an optimal process of alkalization dependent on the content of hemicellulose and lignin in vegetable fibers. The aim of this research was to investigate the influence of alkali treatment on the surface microstructure and tensile properties of coir and abaca fibers. These fibers were immersed into a 5% solution of NaOH at laboratory temperature for a time interval of 30 min, 1 h, 2 h, 3 h, 6 h, 12 h, 24 h, and 48 h, rinsed and dried. The fiber surface microstructures before and after the alkali treatment were evaluated by SEM (scanning electron microscopy). SEM analysis showed that the alkali treatment in the NaOH solution led to a gradual connective material removal from the fiber surface. The effect of the alkali is evident from the visible changes on the surface of the fibers.

scholarly journals Factors Affecting Acoustic Properties of Natural-Fiber-Based Materials and Composites: A Review

Textiles ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 55-85
Author(s):  
Tufail Hassan ◽  
Hafsa Jamshaid ◽  
Rajesh Mishra ◽  
Muhammad Qamar Khan ◽  
Michal Petru ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Fiber Type ◽  
Alkali Treatment ◽  
Acoustic Properties ◽  
Synthetic Fiber ◽  
Sound Insulation ◽  
Factors Affecting ◽  
Wide Range

Recently, very rapid growth has been observed in the innovations and use of natural-fiber-based materials and composites for acoustic applications due to their environmentally friendly nature, low cost, and good acoustic absorption capability. However, there are still challenges for researchers to improve the mechanical and acoustic properties of natural fiber composites. In contrast, synthetic fiber-based composites have good mechanical properties and can be used in a wide range of structural and automotive applications. This review aims to provide a short overview of the different factors that affect the acoustic properties of natural-fiber-based materials and composites. The various factors that influence acoustic performance are fiber type, fineness, length, orientation, density, volume fraction in the composite, thickness, level of compression, and design. The details of various factors affecting the acoustic behavior of the fiber-based composites are described. Natural-fiber-based composites exhibit relatively good sound absorption capability due to their porous structure. Surface modification by alkali treatment can enhance the sound absorption performance. These materials can be used in buildings and interiors for efficient sound insulation.

Sign in / Sign up

Export Citation Format

Share Document