scholarly journals Application of divided convective-dispersive transport model to simulate variability of conservative transport processes inside a planted horizontal subsurface flow constructed wetland

2020 ◽  
Author(s):  
Ernő Dittrich ◽  
Mihály Klincsik ◽  
Dávid Somfai ◽  
Anita Dolgos-Kovács ◽  
Tibor Kiss ◽  
...  
Keyword(s):  
Constructed Wetland ◽  
Dispersion Coefficient ◽  
Transport Model ◽  
Subsurface Flow ◽  
Distribution Functions ◽  
Transport Processes ◽  
Inverse Gaussian ◽  
Dispersive Transport ◽  
Subsurface Flow Constructed Wetland ◽  
Horizontal Subsurface Flow

AbstractThis paper offers a novel application of our model worked out in Maple environment to help understand the very complex transport processes in horizontal subsurface flow constructed wetland with coarse gravel (HSFCW-C). We made tracer measurements: Inside a constructed wetland, we had 9 sample points, and samples were taken from each point at two depths. Our model is a divided convective-dispersive transport (D-CDT) model which makes a fitted response curve from the sum of two separate CDT curves showing the contributions of the main and side streams. Analytical solutions of CDT curves are inverse Gaussian distribution functions. This model was fitted onto inner points of the measurements to demonstrate that the model gives better fitting to the inner points than the commonly used convective-dispersive transport model. The importance of this new application of the model is that it can resemble transport processes in these constructed wetlands more precisely than the regularly used convective-dispersive transport (CDT) model. The model allows for calculations of velocity and dispersion coefficients. The results showed that this model gave differences of 4–99% (of velocity) and 2–474% (of dispersion coefficient) compared with the CDT model and values were closer to actual hydraulic behavior. The results also demonstrated the main flow path in the system.

On-site treatment of domestic wastewater using a small-scale horizontal subsurface flow constructed wetland

2010 ◽  
Vol 62 (3) ◽  
pp. 603-614 ◽  
Author(s):  
G. D. Gikas ◽  
V. A. Tsihrintzis
Keyword(s):  
Constructed Wetland ◽  
Rural Areas ◽  
Subsurface Flow ◽  
Monitoring Program ◽  
Statistical Testing ◽  
Small Scale ◽  
Single Family ◽  
Subsurface Flow Constructed Wetland ◽  
Removal Efficiencies ◽  
Horizontal Subsurface Flow

A small-scale horizontal subsurface flow constructed wetland, located in North Greece, was designed and constructed to treat wastewater from a single-family residence. A three-year monitoring program was undertaken to evaluate the performance of this system. The monitoring campaigns were organized every 7 days. Water quality samples were collected at the inlet, at intermediate points (i.e. at the end of each treatment stage) and at the outlet of the system. Temperature, electrical conductivity, pH and DO were measured in-situ with the use of appropriate instruments at the same points of water sample collection. Water samples were analyzed for BOD, COD, TKN, ammonia, nitrate, nitrite, total phosphorus (TP), ortho-phosphate (OP), total suspended solids (TSS) and total coliforms (TC). Mean removal efficiencies for the monitoring period were: 86.5% for BOD, 84.6% for COD, 83.7% for TKN, 82.2% for ammonia, 63.1% for OP, 63.3% for TP, 79.3% for TSS and 99.9% for TC. Furthermore, based on statistical testing, TKN, ammonia and TP removal efficiencies showed dependence on temperature. The paper presents facility description, study details and monitoring results. The study shows that the use of constructed wetlands in wastewater treatment is a good option for single-family residences in rural areas.

Performance of horizontal subsurface flow constructed wetland in the removal of tanninsA paper submitted to the Journal of Environmental Engineering and Science.

2010 ◽  
Vol 37 (3) ◽  
pp. 496-501 ◽  
Author(s):  
K.N. Njau ◽  
M. Renalda
Keyword(s):  
Removal Efficiency ◽  
Constructed Wetland ◽  
Control Cell ◽  
Subsurface Flow ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Outlet Concentration ◽  
Cod Removal Efficiency ◽  
Subsurface Flow Constructed Wetland ◽  
Horizontal Subsurface Flow

A horizontal subsurface flow constructed wetland (HSSFCW) was employed to remove tannins from the effluent of a tannins extracting company. Two HSSFCW cells with hydraulic retention time (HRT) of 9 d and packed with limestone were used. One cell without macrophytes was used as a control, while the second cell was planted with Phragmites mauritianus . Results indicated that HSSFCW was capable of treating tannin wastewater that has been seeded with primary facultative pond sludge. Tannins and chemical oxygen demand (COD) removal efficiency of 95.9% and 90.6% with outlet concentration of 27 mg/L and 86 mg/L, respectively, were obtained in the planted cell; while the tannins and COD removal efficiency of 91.1% and 89.5% with outlet concentration of 57 mg/L and 96 mg/L, respectively, were obtained in the control cell.

Sign in / Sign up

Export Citation Format

Share Document