scholarly journals Electric and biomethane-fuelled urban buses: comparison of environmental performance of different powertrains

2022 ◽  
Author(s):  
Giampiero Mastinu ◽  
Laura Solari
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Public Transport ◽  
Environmental Performance ◽  
Case Scenario ◽  
Worst Case ◽  
Weak Points ◽  
Zero Emission ◽  
Electric Powertrains

Abstract Purpose The paper aims to promote the transition to low/zero emission of the local public transport, particularly, urban buses are taken into account. Method The life cycle assessment of electric and biomethane-fuelled urban buses is performed by exploiting SimaPro commercial software (v.9.1.1.). Attention is focused on powertrains. Both midpoint and endpoint analyses are performed. Referring to environmental impact, the best compressed biomethane gas (CBG) powertrain was compared to the best electric one. Additionally, the worst-case scenario has been considered for both CBG and electric powertrains. Results CBG powertrain outperforms the electric one if overall greenhouse gas emissions are considered. However, the electric powertrain seems promising for human health and ecosystem. Conclusions The environmental performance of the two powertrains is good. Both of the two technologies have strength and weak points that anyhow make them good candidates for a clean local public transport of the future. The analysis performed in the paper suggests a future investigation on hybrid electric-CBG powertrain. Actually, such a solution could benefit from both the strengths of the biomethane and the electric powertrain.

scholarly journals Application of life-cycle assessment to the eco-design of LED lighting products

2020 ◽  
Vol 5 (2) ◽  
Author(s):  
Shuyi Wang ◽  
Daizhong Su ◽  
You Wu ◽  
Zijian Chai
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Product Design ◽  
Environmental Performance ◽  
New Product ◽  
Design Features ◽  
Design Specification ◽  
Led Lighting ◽  
Lca Results

Abstract An approach for integrating life-cycle assessment (LCA) into the eco-design of lighting products was developed, and LCAs of five lighting products that are currently on the market were then carried out using this approach. Based on the results of these LCAs, the sustainability requests for lighting products were derived and embedded into the product design specification (PDS), thus ensuring that any product developed according to the PDS would have the desired eco-design features. A new sustainable lighting product was then designed according to the PDS and manufactured, after which the new product underwent LCA. Upon comparing the results of the LCA of the new product with the LCA results for the existing lighting products, the newly designed product was found to provide better environmental performance than the existing products (a 27–58% reduction in environmental impact).

Defining Key Environmental Performance Factors (KEPF) for Gas Turbines Eco-Design and Production Through Life Cycle Assessment

2020 ◽  
Author(s):  
Alessandro Musacchio ◽  
Andrea Corona ◽  
Luca Cencioni ◽  
Angela Serra ◽  
Pietro Bartocci ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Performance ◽  
Gas Turbines ◽  
Material Selection ◽  
Relative Weight ◽  
Performance Factors ◽  
Wide Range ◽  
Design And Production

Abstract Nowadays environmental impact assessment of a new product is necessary to meet rising sustainability requirements also in the Oil & Gas and Power Generation markets, especially for industrial gas turbines. From the conceptual phase to the detailed design, engineer’s work is supported by a wide range of tools aimed to define and evaluate typical parameters such as performances, life and costs, etc. However, considering environmental impact aspects from the early stages of product development may not be easy if the involved engineers are not provided by a specific Life Cycle Assessment (LCA) knowledge. Scope of this paper is to introduce and explain the development of a methodology aimed to define and evaluate the Key Environmental Performance Factors (KEPF) during the whole design process. The proposed methodology enables easy and fast eco-design evaluations and supports sustainable design assessments. Preliminary analysis of the entire processes involved in gas turbine (GT) design and production as well as testing and commissioning phases were performed to evaluate which factors affect mostly the Carbon Footprint of each process, referred to their specific functional unit. Extrapolating the KEPF from Cradle-to-Gate LCA they can be combined with case-specific qualitative and quantitative information such as material selection, manufacturing processes, mass quantity, presence of coatings etc. to provide environmental assessments. A case study of LCA applied to a heavy-duty GT is presented to outline the relative weight of each KEPF.

Impact of Supply Chain Solutions on Environmental Performance of Biomass Use – LCA-based Research Case

2017 ◽  
Vol 8 (1) ◽  
pp. 57-66
Author(s):  
Tomasz Nitkiewicz ◽  
Agnieszka Ociepa-Kubicka
Keyword(s):  
Life Cycle Assessment ◽  
Supply Chain ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Performance ◽  
Environmental Policies ◽  
Assessment Method ◽  
Steam Boiler ◽  
Production Facility ◽  
Perform Sensitivity Analysis

Abstract The article presents the activities of selected company - biomass manufacturer and user - with regard to environmental impact of biomass supply chain solutions. The biomass production facility of Biomass User Company is one of the most modern plant in Central Europe. It uses wooden and agricultural biomass to produce heat in biomass-fired steam boiler. The objective of the paper is to investigate the environmental impact with the use of life cycle assessment method. In our study, we define different scenarios for biomass transportation, concerning its supply as well as distribution. Life cycle assessment method is used to estimate environmental impact and to perform sensitivity analysis on transport modes, fuel mix structure and destination of self-cropped biomass. LCA ReCiPe endpoint indicator is used to measure environmental performance. As the results show, transport efforts are not significant factor while environmental impacts are concerned but are rather impact intensive type of activity and should be addressed with company environmental policies.

scholarly journals Toward LCA-lite: A Simplified Tool to Easily Apply LCA Logic at the Early Design Stage of Building in Australia

2019 ◽  
Vol 8 (5) ◽  
pp. 383 ◽  
Author(s):  
Toktam B. Tabrizi ◽  
Arianna Brambilla
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Performance ◽  
Building Design ◽  
Design Stage ◽  
Effective Parameters ◽  
Early Design ◽  
Early Design Stage ◽  
Knowledge Based

Life Cycle Assessment (LCA), developed over 30 years ago, has been helpful in addressing a growing concern about the direct and indirect environmental impact of buildings over their lifetime. However, lack of reliable, available, comparable and consistent information on the life cycle environmental performance of buildings makes it very difficult for architects and engineers to apply this method in the early stages of building design when the most important decisions in relation to a building’s environmental impact are made. The LCA quantification method with need of employing complex tools and an enormous amount of data is unfeasible for small or individual building projects. This study discusses the possibility of the development of a tool that allows building designers to more easily apply the logic of LCA at the early design stage. Minimising data requirements and identifying the most effective parameters that promise to make the most difference, are the key points of simplification method. The conventional LCA framework and knowledge-based system are employed through the simplification process. Results of previous LCA studies in Australia are used as the specific knowledge that enable the system to generate outputs based on the user’s inputs.Keywords: Life Cycle Assessment (LCA), early design stage, most effective parameters, life cycle environmental performance

scholarly journals The environmental performance of a fossil-free ship propulsion system with onboard carbon capture – a life cycle assessment of the HyMethShip concept

2021 ◽  
Author(s):  
Elin Malmgren ◽  
Selma Brynolf ◽  
Erik Fridell ◽  
Maria Grahn ◽  
Karin Andersson
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Performance ◽  
Carbon Capture ◽  
Propulsion System ◽  
Ship Propulsion

Pre-combustion onboard carbon capture could be part of lowering the environmental impact from the shipping sector.

The effect of biogas digestion on the environmental impact and energy balances in organic cropping systems using the life-cycle assessment methodology

2010 ◽  
Vol 25 (3) ◽  
pp. 204-218 ◽  
Author(s):  
Jens Michel ◽  
Achim Weiske ◽  
Kurt Möller
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Organic Farming ◽  
Environmental Performance ◽  
Crop Residues ◽  
Cropping Systems ◽  
Impact Categories ◽  
Biogas Digestion ◽  
Liquid Slurry

AbstractA life-cycle assessment (LCA) was carried out to compare the environmental performance of different organic cropping systems with and without digestion of slurry and crop residues. The aims of the present study are: (1) to compare the environmental performance of organic farming dairy systems with the currently prevalent animal housing systems [solid farmyard manure (FYM) versus liquid slurry] as the main reference systems; (2) to analyze the effect of the implementation of a biogas digestion system on the consumption of fossil fuels and production of electrical energy; (3) to quantify the effects of the implementation of a biogas digestion system on the environment; and (4) to compare the obtained net energy yields with other means of obtaining energy by using the farmland area. The considered impact categories are greenhouse gas (GHG) balances, acidification, eutrophication and groundwater pollution. LCA results indicated that total emissions in systems based on FYM are much higher than in liquid slurry systems for most of the considered impact categories. The benefits of digestion of stable wastes in comparison with the reference system without digestion are mainly (1) the net reduction of the emissions of GHG and (2) energy recovery from produced biogas, while the disadvantages can be higher emissions of NH3 after spreading. The effects of additional biogas digestion of biomass such as crop residues (e.g., straw of peas and cereals) and cover crops are: (1) an optimization of the N-cycle and therewith higher yields; (2) higher energy production per unit arable land; (3) a further reduction of the GHG balance; but (4) higher N-related environmental burdens like eutrophication and acidification. The offsets of fossil fuel emissions were the largest GHG sink in most of the biogas digestion systems. The inclusion of a biogas plant into organic cropping systems and the use of the available wastes for production of energy largely increased the overall productivity of the farming system and matched very well the basic principles of organic farming such as a high self-sufficiency of the cropping system and reducing as much as possible the environmental impact of farming.

scholarly journals Life Cycle Assessment of an Electric Chiller Integrated with a Large District Cooling Plant

2021 ◽  
Vol 13 (1) ◽  
pp. 389
Author(s):  
Chima Cyril Hampo ◽  
Ainul Bt Akmar ◽  
Mohd Amin Abd Majid
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Performance ◽  
Renewable Energy Sources ◽  
Ecological Impact ◽  
Electrical Power ◽  
Environmental Load ◽  
Centrifugal Chillers ◽  
Conventional Cooling

District cooling (DC) systems have recently proven to be more economically and environmentally viable as compared to conventional cooling techniques. In most DC setups, electric centrifugal chillers (ECCs) are installed to provide chilled water (CW) to charge the thermal energy storage (TES) tank or for direct CW supply to the DC network. The operation of these ECC systems consumes most of the electrical power supplied to the entire DC plant; this therefore strengthens the need to conduct a comprehensive environmental assessment in order to quantify the indirect ecological impact resulting from the energy consumed in the ECC system operation. In order to achieve this, a case study was conducted of four ECC systems with a use-life of 25 years installed in a large DC plant in Malaysia. A gate-to-gate life cycle assessment (LCA) methodology was adopted to analyze the environmental performance of the system setup. The result of the study year reveals that April and June account for the highest and lowest environmental impact, respectively. The influence of climatic temperature conditions on the monthly cooling and environmental load distribution was also observed from the results. Finally, in substantiating the study’s investigation, environmental performance based on the composition of two different electricity fuel mixes is discussed and compared. The results revealed a drastic decrease in environmental load as the ratio of non-renewable energy sources decreased in the composition of the mix, thereby reducing the contribution of the overall environmental impact of the ECC systems’ use phase.

Life cycle assessment of geothermal power generation in the Southern German Molasse Basin – The binary plant Kirchstockach

2021 ◽  
Author(s):  
Christoph Bott ◽  
Kathrin Menberg ◽  
Florian Heberle ◽  
Dieter Brüggemann ◽  
Peter Bayer
Keyword(s):  
Power Generation ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Power Plant ◽  
Environmental Impact ◽  
Environmental Performance ◽  
Molasse Basin ◽  
Geothermal Systems ◽  
System Parameters

<p>Under geologically beneficial conditions, geothermal facilities are often rated as efficient, as well as clean and climate-neutral energy technologies. In fact, for supporting a good environmental performance of a technology, the total environmental impact caused by all associated material and energy consumption needs to be examined. Life cycle assessment (LCA) according to ISO standards 14040 and 14044 considers not only operation, but also the construction and decommissioning phases while addressing different environmental impact categories. Therefore, LCA-based environmental evaluation has been proposed in several previous studies. A review of the state-of the art in this field shows that some critical system parameters are often disregarded. Furthermore, many existing studies are solely based on theoretical datasets without validation to specific application cases.</p><p>Our work addresses these two shortcomings by performing a comprehensive LCA using operational data of the binary, two-stage ORC, Kirchstockach power plant in the Southern German Molasse Basin. Given its technical specifications, a representative base case scenario provides an excellent reference for benchmarking against other power plants. Environmental impacts of different technical modifications are assessed in terms of global warming potential, non-renewable energy consumption, aquatic acidification and eutrophication. Using scenario analyses, we consider the influence of emerging key factors, such as refrigerant leakage, focusing on various system components. Firstly, we identify reinforcing effects due to interrelationships between these system parameters, e.g. when using environmentally friendly ORC refrigerants. Secondly, uncertainty analyses provide insights into potential measures for ecological system improvements by using different materials and methods in the construction and operation phases. For comparison and benchmarking purposes, conventional power generation resources and comparable studies in the field of binary geothermal systems, enhanced geothermal systems, and flash systems are included. Besides the general positive ranking of the Kirchstockach power plant environmental performance, our multi-objective study ultimately reveals not only key performance factors, but it also underlines the overall relevance of case studies to validate generic and global assumptions.</p>

Excellent environmental performance of beet sugar production in the Netherlands

2020 ◽  
pp. 161-165
Author(s):  
Bertram de Crom ◽  
Jasper Scholten ◽  
Janjoris van Diepen
Keyword(s):  
Climate Change ◽  
Land Use ◽  
Life Cycle ◽  
Environmental Impact ◽  
Water Consumption ◽  
Environmental Performance ◽  
Cane Sugar ◽  
Sugar Production ◽  
Beet Sugar ◽  
Glucose Syrup

To get more insight in the environmental performance of the Suiker Unie beet sugar, Blonk Consultants performed a comparative Life Cycle Assessment (LCA) study on beet sugar, cane sugar and glucose syrup. The system boundaries of the sugar life cycle are set from cradle to regional storage at the Dutch market. For this study 8 different scenarios were evaluated. The first scenario is the actual sugar production at Suiker Unie. Scenario 2 until 7 are different cane sugar scenarios (different countries of origin, surplus electricity production and pre-harvest burning of leaves are considered). Scenario 8 concerns the glucose syrup scenario. An important factor in the environmental impact of 1kg of sugar is the sugar yield per ha. Total sugar yield per ha differs from 9t/ha sugar for sugarcane to 15t/ha sugar for sugar beet (in 2017). Main conclusion is that the production of beet sugar at Suiker Unie has in general a lower impact on climate change, fine particulate matter, land use and water consumption, compared to cane sugar production (in Brazil and India) and glucose syrup. The impact of cane sugar production on climate change and water consumption is highly dependent on the country of origin, especially when land use change is taken into account. The environmental impact of sugar production is highly dependent on the co-production of bioenergy, both for beet and cane sugar.

Packaging environmental impact on seafood supply chains: A review of life cycle assessment studies

2021 ◽  
Author(s):  
Cheila Almeida ◽  
Philippe Loubet ◽  
Tamíris Pacheco da Costa ◽  
Paula Quinteiro ◽  
Jara Laso ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Supply Chains
Sign in / Sign up

Export Citation Format

Share Document