Presence of carboxylate salts in marine carbonate strata of the Ordos Basin and their impact on hydrocarbon generation evaluation of low TOC, high maturity source rocks

2013 ◽  
Vol 56 (12) ◽  
pp. 2141-2149 ◽  
Author(s):  
QuanYou Liu ◽  
ZhiJun Jin ◽  
WenHui Liu ◽  
LongFei Lu ◽  
QianXiang Meng ◽  
...  
2006 ◽  
Vol 51 (23) ◽  
pp. 2885-2891 ◽  
Author(s):  
Xinhua Geng ◽  
Ansong Geng ◽  
Yongqiang Xiong ◽  
Jinzhong Liu ◽  
Haizu Zhang ◽  
...  

2017 ◽  
Vol 54 (12) ◽  
pp. 1228-1247
Author(s):  
Zhengjian Xu ◽  
Luofu Liu ◽  
Tieguan Wang ◽  
Kangjun Wu ◽  
Wenchao Dou ◽  
...  

With the success of Bakken tight oil (tight sandstone oil and shale oil) and Eagle Ford tight oil in North America, tight oil has become a research focus in petroleum geology. In China, tight oil reservoirs are predominantly distributed in lacustrine basins. The Triassic Chang 6 Member is the main production layer of tight oil in the Ordos Basin, in which the episodes, timing, and drive of tight oil charging have been analyzed through the petrography, fluorescence microspectrometry, microthermometry, and trapping pressure simulations of fluid inclusions in the reservoir beds. Several conclusions have been reached in this paper. First, aqueous inclusions with five peaks of homogenization temperatures and oil inclusions with three peaks of homogenization temperatures occurred in the Chang 6 reservoir beds. The oil inclusions are mostly distributed in fractures that cut across and occur within the quartz grains, in the quartz overgrowth and calcite cements, and the fractures that occur within the feldspar grains, with blue–green, green, and yellow–green fluorescence colours. Second, the peak wavelength, Q650/500, and QF535 of the fluorescence microspectrometry indicate three charging episodes of tight oil with different oil maturities. The charging timings (141–136, 126–118, and 112–103 Ma) have been ascertained by projecting the homogenization temperatures of aqueous inclusions onto the geological time axis. Third, excess-pressure differences up to 10 MPa between the Chang 7 source rocks and the Chang 6 reservoir beds were the main driving mechanism supporting the process of nonbuoyancy migration.


2020 ◽  
Vol 206 ◽  
pp. 01017
Author(s):  
Yangbing Li ◽  
Weiqiang Hu ◽  
Xin Chen ◽  
Litao Ma ◽  
Cheng Liu ◽  
...  

Based on the comprehensive analysis of the characteristics of tight sandstone gas composition, carbon isotope, light hydrocarbons and source rocks in Linxing area of Ordos Basin, the reservoir-forming model of tight sandstone gas in this area is discussed. The study shows that methane is the main component of tight sandstone gas, with low contents of heavy hydrocarbons and non-hydrocarbons, mainly belonging to dry gas in the Upper Paleozoic in Linxing area. The values of δ13C1, δ13C2 and δ13C3 of natural gas are in the ranges of -45.6‰ ~ -32.9‰, -28.9‰ ~ -22.3‰ and -26.2‰~ -19.1‰, respectively. The carbon isotopic values of alkane gas show a general trend of positive carbon sequence. δ13C1 value is less than -30‰, with typical characteristics of organic genesis. There is a certain similarity in the composition characteristics of light hydrocarbons. The C7 series show the advantage of methylhexane, while the C5-7 series mainly shows the advantage of isoalkane. The tight sandstone gas in this area is mainly composed of mature coal-derived gas, containing a small amount of coal-derived gas and oil-type gas mixture. According to the mode of hydrocarbon generation, diffusion and migration of source rocks in Linxing area, the tight sandstone gas in the study area can be divided into three types of reservoir-forming assemblages: the upper reservoir type of the far-source type (upper Shihezi formation-shiqianfeng formation sandstone reservoir-forming away from source rocks), the upper reservoir type of the near-source type ( the Lower Shihezi formation sandstone reservoir-outside the source rock), and the self-storage type of the source type (Shanxi formation-Taiyuan formation source rock internal sand reservoir).


2017 ◽  
Vol 5 (2) ◽  
pp. SF225-SF242 ◽  
Author(s):  
Xun Sun ◽  
Quansheng Liang ◽  
Chengfu Jiang ◽  
Daniel Enriquez ◽  
Tongwei Zhang ◽  
...  

Source-rock samples from the Upper Triassic Yanchang Formation in the Ordos Basin of China were geochemically characterized to determine variations in depositional environments, organic-matter (OM) source, and thermal maturity. Total organic carbon (TOC) content varies from 4 wt% to 10 wt% in the Chang 7, Chang 8, and Chang 9 members — the three OM-rich shale intervals. The Chang 7 has the highest TOC and hydrogen index values, and it is considered the best source rock in the formation. Geochemical evidence indicates that the main sources of OM in the Yanchang Formation are freshwater lacustrine phytoplanktons, aquatic macrophytes, aquatic organisms, and land plants deposited under a weakly reducing to suboxic depositional environment. The elevated [Formula: see text] sterane concentration and depleted [Formula: see text] values of OM in the middle of the Chang 7 may indicate the presence of freshwater cyanobacteria blooms that corresponds to a period of maximum lake expansion. The OM deposited in deeper parts of the lake is dominated by oil-prone type I or type II kerogen or a mixture of both. The OM deposited in shallower settings is characterized by increased terrestrial input with a mixture of types II and III kerogen. These source rocks are in the oil window, with maturity increasing with burial depth. The measured solid-bitumen reflectance and calculated vitrinite reflectance from the temperature at maximum release of hydrocarbons occurs during Rock-Eval pyrolysis ([Formula: see text]) and the methylphenanthrene index (MPI-1) chemical maturity parameters range from 0.8 to [Formula: see text]. Because the thermal labilities of OM are associated with the kerogen type, the required thermal stress for oil generation from types I and II mixed kerogen has a higher and narrower range of temperature for hydrocarbon generation than that of OM dominated by type II kerogen or types II and III mixed kerogen deposited in the prodelta and delta front.


2021 ◽  
Author(s):  
Jiyuan You ◽  
Yiqun Liu ◽  
Dingwu Zhou ◽  
Yiyao Yang

Abstract Because few well-preserved hydrothermal channels have been found in terrestrial sedimentary rocks, research on LTHA in geological history is relatively sparse. In this study, we present our original discovery of “hydrothermal channels” from the Chang 7 source rocks of the Triassic Yanchang Formation in the Ordos Basin, China, and provide the best evidence for deciphering LTHA preserved in the geological record (i.e., sedimentary rocks). Three possible LTHA samples (i.e., samples 1551.6, 1551.6-2 and 1574.4) were collected for this study; they were interbedded with mudstones and oil shales, indicative of a deep-lake sedimentary environment. All three samples consist mainly of anhydrite, pyrite, and dolomite with the formation of mineral zoning across the walls of these structures, suggesting a sulfate-dominated stage and a carbonate-sulfide replacement stage. Moreover, their in situ geochemistry is characterized by high Eu, U, Th, Sr, Mn and U/Th ratios, which are typical indicators of hydrothermal vents. In addition, their S isotopes range from 7.89% to 10.88%, the magmatic sulfur accounted for approximately 94.3%, implying a possible magmatic trigger for these hydrothermal channels. All this evidence shows that the Triassic sedimentary rocks of the Ordos Basin probably contain LTHA. Comparing ancient LTHA to modern hydrothermal chimneys, we should note the important implications of LTHA; their formation mechanism may have been related to oil production, and they are possible indicators for future oil investigations. Further, they have great significance for studying the hydrothermal properties of primary dolomite.


2020 ◽  
pp. 1-49
Author(s):  
Haikuan Nie ◽  
Xiaoliang Wei ◽  
Jinchuan Zhang ◽  
Qian Chen ◽  
Guangxiang Liu ◽  
...  

Gas reservoirs can be divided into two types based on the migration and accumulation processes, and distribution characteristics associated with the reservoirs: continuous accumulation that is within or adjacent to the source rocks and discontinuous accumulation that is in the reservoir rocks. Correspondingly, reservoirs can also be classified as conventional reservoirs, unconventional reservoirs and reservoirs in a transitional state. In order to demonstrate differences and regularities in the distribution characteristics and formation mechanisms of the two accumulation types, the continuous and discontinuous hydrocarbon accumulations in the Hangjinqi area of the Ordos Basin, China, is systematically analyze. Continuous accumulation (coalbed methane, shale gas, basin-centered gas, water-soluble gas) and discontinuous accumulation reservoirs (various traps) are located in the southern and northern regions of the Hangjinqi area, respectively, and they may be changed with the source rock quality, migration force, reservoir capacity and trapping condition. Several factors, such as hydrocarbon generation ability, porosity, and cap rock-trap combinations, are recognized here as essential factors for the formation and current distribution of gas reservoirs in the study area. Understanding the distribution characteristics of continuous accumulation and discontinuous accumulation can predict the potential gas reservoirs types based on discovered gas reservoirs. It is recommended to explore anticline gas reservoirs in the north of Boerjianghaizi fault, and CBM, shale gas and basin-centered gas reservoirs in the south of Boerjianghaizi fault. Though shale gas exploration activity is still lacking in the study area, we believe that the maturity and the burial depth of the marine-continental organic-rich shale in the Permian Shanxi-Taiyuan Formations are suitable for shale gas generation and preservation, indicating further research on the upper Paleozoic shale source rocks is required.


2021 ◽  
pp. 105349
Author(s):  
Jingdong Liu ◽  
Tao Liu ◽  
Hua Liu ◽  
Lulu He ◽  
Lunju Zheng

Sign in / Sign up

Export Citation Format

Share Document