Enhancing the cycle stability of Zr-doped LiNi0.83Co0.12Mn0.05O2 by co-precipitation

Ionics ◽  
2021 ◽  
Author(s):  
Linyan Li ◽  
Yu Han ◽  
Bingbing Zhao ◽  
Gaolei Zhao ◽  
Wenjiang Qiang ◽  
...  
Keyword(s):  
Cycle Stability ◽  
Co Precipitation

Influence of Li, Al Substitution for Mn on Crystal Structure and Electrochemical Performance of Li1+xMn2-x-yAlyO4 Cathode Materials

2014 ◽  
Vol 1058 ◽  
pp. 297-301
Author(s):  
Fei Luo ◽  
Lin Zhang ◽  
Zhi Dan Li ◽  
Jian Hua Wang ◽  
Yu Zhong Guo
Keyword(s):  
Crystal Structure ◽  
Electrochemical Performance ◽  
Cathode Materials ◽  
Cycle Stability ◽  
Galvanostatic Charge ◽  
Crystalline Structures ◽  
Al Substitution ◽  
Powder Samples ◽  
Co Precipitation ◽  
Charge Discharge

Li1+xMn2-x-yAlyO4cathode materials were prepared via co-precipitation route; and the crystalline structures, morphologies and electrochemical performance of the prepared powder samples are characterized by XRD, SEM, Galvanostatic charge–discharge cycling. Experimental results show that Li, Al co-substitution significantly enforces the crystalline structures and improves the cycle stability of LiMn2O4materials, and Li1.1Mn1.805Al0.095O4exhibits promising electrochemical performance.

Pre-concentration of selected trace elements from seawater by co-precipitation on Mg(OH)2

2003 ◽  
Vol 107 ◽  
pp. 945-948 ◽  
Author(s):  
P. M. Nicolaysen ◽  
E. Steinnes ◽  
T. E. Sjobakk
Keyword(s):  
Trace Elements ◽  
Co Precipitation

Magnetic and dielectric properties of BiFeO3 nanoparticles

2015 ◽  
Vol 7 (2) ◽  
pp. 1393-1403
Author(s):  
Dr R.P VIJAYALAKSHMI ◽  
N. Manjula ◽  
S. Ramu ◽  
Amaranatha Reddy
Keyword(s):  
Diffuse Reflectance Spectrum ◽  
Precipitation Method ◽  
Secondary Phases ◽  
X Ray Diffraction ◽  
Bifeo3 Nanoparticles ◽  
Transmission Electron ◽  
Multiferroic Bifeo3 ◽  
Pure Phase ◽  
Simple Chemical ◽  
Co Precipitation

Single crystalline nano-sized multiferroic BiFeO3 (BFO) powders were synthesized through simple chemical co-precipitation method using polyethylene glycol (PEG) as capping agent. We obtained pure phase BiFeO3 powder by controlling pHand calcination temperature. From X-ray diffraction studies the nanoparticles were unambiguously identified to have a rhombohedrally distorted perovskite structure belonging to the space group of R3c. No secondary phases were detected. It indicates single phase structure. EDX spectra indicated the appearance of three elements Bi, Fe, O in 1:1:3. From the UV-Vis diffuse reflectance spectrum, the absorption cut-off wavelength of the BFO sample is around 558nm corresponding to the energy band gap of 2.2 eV. The size (60-70 nm) and morphology of the nanoparticles have been analyzed using transmission electron microscopy (TEM).   Linear M−H behaviour and slight hysteresis at lower magnetic field is observed for BiFeO3 nanoparticles from Vibrating sample magnetometer studies. It indicates weak ferromagnetic behaviour at room temperature. From dielectric studies, the conductivity value is calculated from the relation s = L/RbA Sm-1 and it is around 7.2 x 10-9 S/m.

Exploring the characterization of Ni doped MgO nanoparticles using co-precipitation method

2020 ◽  
Vol 3 (1) ◽  
pp. 30-33
Author(s):  
Muthulakshmi M ◽  
Madhumitha G
Keyword(s):  
Magnesium Oxide ◽  
Analytical Techniques ◽  
Nickel Chloride ◽  
Precipitation Method ◽  
Crystalline Powder ◽  
High Melting Point ◽  
Design Synthesis ◽  
Mgo Nanoparticles ◽  
Co Precipitation

Nanotechnology is a field of applied science focused on design, synthesis and characterization of nanomaterials. The nickel and magnesium have improved their applications in transparent electrodes and nano electronics. In addition, magnesium oxide has moisture resistance and high melting point properties. In the present work has been carried out in the development of green crystalline powder of nickel doped magnesium oxide nanoparticles by Co-precipitation method, from the mixture of nickel chloride and magnesium chloride with KOH as solvent. From the XRD results, crystalline size of the particle can be observed. Spherical structure of Ni doped MgO nanoparticles were indicated by SEM results and powdered composition of samples were obtained from FTIR. EDAX represents the peak composition of the nanoparticle. The above analytical techniques have confirmed that the Ni doped MgO nanoparticles obtained from the mixture of NiCl2 and MgCl2.

Diseases Prevention by Water Defluoridation Using Hydrotalcites as Decontaminant Materials

2017 ◽  
Vol 68 (1) ◽  
pp. 168-171 ◽  
Author(s):  
Letitia Doina Duceac ◽  
Cristina Elena Dobre ◽  
Ioana Pavaleanu ◽  
Gabriela Calin ◽  
Simona Nichitus ◽  
...  
Keyword(s):  
Dental Fluorosis ◽  
Precipitation Method ◽  
Original Structure ◽  
Fluoride Removal ◽  
Major Goal ◽  
Bone Stiffness ◽  
Morphological Aspects ◽  
Adsorption Capacities ◽  
Interlayer Structure ◽  
Co Precipitation

Preventing diseases is deemed to be the major goal of our century especially when an excessive fluoride in drinking water can cause dental fluorosis, bone stiffness, rheumatism and skeletal fluorosis. Fluoride uptake from groundwater implies a worldwide multidisciplinary effort in order to develop renewable, cheap, human friendly materials. Among other materials, hydrotalcites could be good candidates for an efficient fluoride removal from water due to their adsorption, anion exchange and reconstruction properties. These nanostructured materials were synthesized using co-precipitation method in controlled conditions. Presence of anions in the interlayer structure and morphological aspects were performed by FTIR and SEM techniques. Thermal treatment of hydrotalcites showed good adsorption capacities for water defluoridation mostly due to their tendency to restore the original structure.

Sign in / Sign up

Export Citation Format

Share Document