Numerical Simulation of Dual-Phase-Lag Model and Inverse Fractional Single-Phase-Lag Problem for the Non-Fourier Heat Conduction in a Straight Fin

2019 ◽  
Vol 29 (3) ◽  
pp. 632-646 ◽  
Author(s):  
Milad Mozafarifard ◽  
Aziz Azimi ◽  
Salem Mehrzad
Author(s):  
C. Liu ◽  
B. Q. Li ◽  
C. Mi

This paper addresses the fast-transient heat conduction phenomena of a gold nanoparticle embedded in cancerous tissue in hyperthermia treatment. Dual phase lag model in spherical coordinates was employed and a semi-analytical solution of 1-D non-homogenous dual phase lag equation was presented. Results show that transient temperature depends dramatically on the lagging characteristic time of the surrounding tissue. Temperature predicted by dual phase lag model greatly exceeds that predicted by a classical diffusion model, with either a constant source or a pulsed source. This phenomenon is mainly attributed by the phase lag of heat flux of tissue. The overheating in short time scale and the consequent biological effect needs to be paid more attention in the related study.


2005 ◽  
Vol 127 (2) ◽  
pp. 189-193 ◽  
Author(s):  
Paul J. Antaki

This work uses the “dual phase lag” (DPL) model of heat conduction to offer a new interpretation for experimental evidence of non-Fourier conduction in processed meat that was interpreted previously with hyperbolic conduction. Specifically, the DPL model combines the wave features of hyperbolic conduction with a diffusion-like feature of the evidence not captured by the hyperbolic case. In addition, comparing the new interpretation to Fourier-based alternatives suggests that further study of all the interpretations could help advance the understanding of conduction in the processed meat and other biological materials such as human tissue.


2018 ◽  
Vol 14 (5) ◽  
pp. 837-856 ◽  
Author(s):  
Gaurav Mittal ◽  
Vinayak Kulkarni

Purpose The purpose of this paper is to frame a dual-phase-lag model using the fractional theory of thermoelasticity with relaxation time. The generalized Fourier law of heat conduction based upon Tzou model that includes temperature gradient, the thermal displacement and two different translations of heat flux vector and temperature gradient has been used to formulate the heat conduction model. The microstructural interactions and corresponding thermal changes have been studied due to the involvement of relaxation time and delay time translations. This results in achieving the finite speed of thermal wave. Classical coupled and generalized thermoelasticity theories are recovered by considering the various special cases for different order of fractional derivatives and two different translations under consideration. Design/methodology/approach The work presented in this manuscript proposes a dual-phase-lag mathematical model of a thick circular plate in a finite cylindrical domain subjected to axis-symmetric heat flux. The model has been designed in the context of fractional thermoelasticity by considering two successive terms in Taylor’s series expansion of fractional Fourier law of heat conduction in the two different translations of heat flux vector and temperature gradient. The analytical results have been obtained in Laplace transform domain by transforming the original problem into eigenvalue problem using Hankel and Laplace transforms. The numerical inversions of Laplace transforms have been achieved using the Gaver−Stehfast algorithm, and convergence criterion has been discussed. For illustrative purpose, the dual-phase-lag model proposed in this manuscript has been applied to a periodically varying heat source. The numerical results have been depicted graphically and compared with classical, fractional and generalized thermoelasticity for various fractional orders under consideration. Findings The microstructural interactions and corresponding thermal changes have been studied due to the involvement of relaxation time and delay time translations. This results in achieving the finite speed of thermal wave. Classical coupled and generalized thermoelasticity theories are recovered by considering the various special cases for different order of fractional derivatives and two different translations under consideration. This model has been applied to study the thermal effects in a thick circular plate subjected to a periodically varying heat source. Practical implications A dual-phase-lag model can effectively be incorporated to study the transient heat conduction problems for an exponentially decaying pulse boundary heat flux and/or for a short-pulse boundary heat flux in long solid tubes and cylinders. This model is also applicable to study the various effects of the thermal lag ratio and the shift time. These dual-phase-lag models are also practically applicable in the problems of modeling of nanoscale heat transport problems of semiconductor devices and accordingly semiconductors can be classified as per their ability of heat conduction. Originality/value To the authors’ knowledge, no one has discussed fractional thermoelastic dual-phase-lag problem associated with relaxation time in a finite cylindrical domain for a thick circular plate subjected to an axis-symmetric heat source. This is the latest and novel contribution to the field of thermal mechanics.


Author(s):  
Swarup Bag ◽  
M. Ruhul Amin

In the present work, the deformation behavior in metallic film subjected to ultra-short laser heating is investigated. Static thermo-elastic behavior is predicted for 100 nm thin film of either single layer or multiple layers. The temperature distribution is estimated from dual-phase lag non-Fourier heat conduction model. The maximum temperature after single pulse is achieved 730 K. The temperature profile for this pulse laser is used to compute elastic stress and distortion field following the minimization of potential energy of the system. In the present work, the simulation has been proposed by developing 3D finite element based coupled thermo-elastic model using dual phase lag effect. The experimental basis of transient temperature distribution in ultra-short pulse laser is extremely difficult or nearly impossible, the model results have been validated with literature reported thermal results. Since the temperature distribution due to pulse laser source varies with time, the stress analysis is performed in incremental mode. Hence, a sequentially coupled thermo-mechanical model is developed that is synchronized between thermal and mechanical analysis in each time steps of transient problem. The maximum equivalent stress is achieved 0.3 GPa. Numerical results show that the predicted thermal stress may exceeds the tensile strength of the material and may lead to crack or damage the thin film.


Sign in / Sign up

Export Citation Format

Share Document