Effect of Temperature and Dynamic Loading on the Mechanical Properties of Copper-Alloyed High-Strength Interstitial-Free Steel

2009 ◽  
Vol 40 (4) ◽  
pp. 856-866 ◽  
Author(s):  
R. Rana ◽  
S.B. Singh ◽  
W. Bleck ◽  
O.N. Mohanty
Keyword(s):  
Mechanical Properties ◽  
Dynamic Loading ◽  
High Strength ◽  
Effect Of Temperature ◽  
Interstitial Free ◽  
Interstitial Free Steel

scholarly journals Experimental Investigation into Corrosion Effect on Mechanical Properties of High Strength Steel Bars under Dynamic Loadings

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Hui Chen ◽  
Jinjin Zhang ◽  
Jin Yang ◽  
Feilong Ye
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Dynamic Loading ◽  
High Strength Steel ◽  
High Strength ◽  
Tensile Tests ◽  
Reinforcing Steel ◽  
Test Results ◽  
Cross Sectional ◽  
Steel Bars

The tensile behaviors of corroded steel bars are important in the capacity evaluation of corroded reinforced concrete structures. The present paper studies the mechanical behavior of the corroded high strength reinforcing steel bars under static and dynamic loading. High strength reinforcing steel bars were corroded by using accelerated corrosion methods and the tensile tests were carried out under different strain rates. The results showed that the mechanical properties of corroded high strength steel bars were strain rate dependent, and the strain rate effect decreased with the increase of corrosion degree. The decreased nominal yield and ultimate strengths were mainly caused by the reduction of cross-sectional areas, and the decreased ultimate deformation and the shortened yield plateau resulted from the intensified stress concentration at the nonuniform reduction. Based on the test results, reduction factors were proposed to relate the tensile behaviors with the corrosion degree and strain rate for corroded bars. A modified Johnson-Cook strength model of corroded high strength steel bars under dynamic loading was proposed by taking into account the influence of corrosion degree. Comparison between the model and test results showed that proposed model properly describes the dynamic response of the corroded high strength rebars.

Changing the Hardness Automotive Steels at Different Strain Rate

2014 ◽  
Vol 635 ◽  
pp. 41-44
Author(s):  
Miroslav Német ◽  
Mária Mihaliková ◽  
Alexandra Kovalčíkova ◽  
Anna Lišková
Keyword(s):  
Strain Rate ◽  
Dynamic Loading ◽  
Automotive Industry ◽  
Interstitial Free ◽  
Loading Conditions ◽  
Product Testing ◽  
Dynamic Conditions ◽  
Interstitial Free Steel ◽  
Dynamic Loading Conditions ◽  
Static And Dynamic Loading

Currently, the automotive industry used sheets of different qualities. The most common include IF (inter Interstitial Free) steel and alloyed steel. Use the sheet quality depends on the point of application in the production car. Testing and product testing is a standard part of the process of innovation and production itself. Testing of automotive steels under dynamic conditions is increasingly important. Changing the hardness HV 1 was performed on the fractured bars on the static and dynamic loading conditions. Tests were made on steel IF and S 460.

Sign in / Sign up

Export Citation Format

Share Document