Three-Dimensional CFD Simulation Coupled with Thermal Contraction in Direct-Chill Casting of A390 Aluminum Alloy Hollow Billet

2016 ◽  
Vol 48 (1) ◽  
pp. 429-443 ◽  
Author(s):  
Kesheng Zuo ◽  
Haitao Zhang ◽  
Ke Qin ◽  
Jianzhong Cui ◽  
Qingzhang Chen
Keyword(s):  
Aluminum Alloy ◽  
Cfd Simulation ◽  
Three Dimensional ◽  
Direct Chill ◽  
Direct Chill Casting ◽  
Thermal Contraction ◽  
Chill Casting ◽  
Hollow Billet

Primary Cooling Heat Transfer during the Direct-Chill Casting of Aluminum Alloy AA6111

2012 ◽  
pp. 1483-1492 ◽  
Author(s):  
Etienne Caron ◽  
Amir Baserinia ◽  
Rosa O. Pelayo ◽  
David C. Weckman ◽  
Mary A. Wells
Keyword(s):  
Heat Transfer ◽  
Aluminum Alloy ◽  
Direct Chill ◽  
Direct Chill Casting ◽  
Chill Casting

Primary Cooling Heat Transfer during the Direct-Chill Casting of Aluminum Alloy AA6111

2012 ◽  
pp. 1483-1492
Author(s):  
Etienne Caron ◽  
Amir Baserinia ◽  
Rosa O. Pelayo ◽  
David C. Weckman ◽  
Mary A. Wells
Keyword(s):  
Heat Transfer ◽  
Aluminum Alloy ◽  
Direct Chill ◽  
Direct Chill Casting ◽  
Chill Casting

The Effect of Casting Speed on Sump Shape and Ingot Surface of HDC Casting 7075 Aluminum Alloy Ingot

2011 ◽  
Vol 189-193 ◽  
pp. 3785-3788 ◽  
Author(s):  
Qing Feng Zhu ◽  
Zhi Hao Zhao ◽  
Xiang Jie Wang ◽  
Jian Zhong Cui
Keyword(s):  
Aluminum Alloy ◽  
Surface Quality ◽  
Casting Speed ◽  
Direct Chill ◽  
Liquid Pool ◽  
Ingot Surface ◽  
Direct Chill Casting ◽  
7075 Aluminum Alloy ◽  
Chill Casting ◽  
Alloy Ingot

7075 aluminum alloy ingot with the diameter of 100 mm has been produced by horizontal direct chill casting in different casting speed. The effect of casting speed on the sump profile and the ingot surface quality was studied by sump profile observation. It was found that increasing the casting speed results in the deepening of the liquid pool, the adding of segregation knots and the reducing of cold shouts in the ingot surface. It is also found that the depth of the liquid pool is directly proportional to the casting speed and the squared radius of the ingot.

Homogenization Behaviors of Low Frequency Electromagnetic Casting and Direct Chill Casting 7050 Aluminum Alloy

2010 ◽  
Vol 97-101 ◽  
pp. 991-994
Author(s):  
Zhi Hao Zhao ◽  
Jian Zhong Cui ◽  
Jing Wang ◽  
Gao Song Wang
Keyword(s):  
Aluminum Alloy ◽  
Low Frequency ◽  
Eutectic Structure ◽  
Optical Microscope ◽  
Direct Chill ◽  
Direct Chill Casting ◽  
Chill Casting ◽  
Electromagnetic Casting ◽  
7050 Aluminum Alloy ◽  
Dsc Analyses

7050 aluminum alloy ingots were produced by low frequency electromagnetic casting (LFEC) and direct chill casting (DC) respectively. As-cast microstructures and homogenization behaviors of LFEC and DC ingots were investigated experimentally. The optical microscope and DSC analyses shown that the grain size of LFEC ingot was finer and the content of constituents and eutectic structure was less than that of DC ingot. Accordingly, the homogenization behaviors of the LFEC and DC ingots were significantly different. The remnant constituents of LFEC ingot were less in content and smaller in size than that of DC ingot after homogenization at 480°C for various lengths of time. Similar to the dissolving of constituents, the LFEC ingot exhibited faster diffusion kinetics of alloying elements from grain boundary to inner. The concentrations of Cu, Mg and Zn inside grain of LFEC ingot after homogenization for 12 h were 2.4%, 2.2% and 6.5% respectively, but the DC ingots had not reach the level even for 48 h.

Sign in / Sign up

Export Citation Format

Share Document