Ultimate Lateral Bearing Capacity and Group Effect of Belled Wedge Pile Groups

2019 ◽  
Vol 23 (12) ◽  
pp. 5041-5050
Author(s):  
Gangqiang Kong ◽  
Huaifeng Peng ◽  
Hongyu Qin ◽  
Lehua Wang ◽  
Yongdong Meng
Keyword(s):  
Bearing Capacity ◽  
Group Effect ◽  
Pile Groups

scholarly journals Development of Simulation Based p-Multipliers for Laterally Loaded Pile Groups in Granular Soil Using 3D Nonlinear Finite Element Model

2020 ◽  
Vol 11 (1) ◽  
pp. 26
Author(s):  
Muhammad Bilal Adeel ◽  
Muhammad Asad Jan ◽  
Muhammad Aaqib ◽  
Duhee Park
Keyword(s):  
Finite Element ◽  
Element Model ◽  
Design Guidelines ◽  
American Petroleum Institute ◽  
Winkler Foundation ◽  
Group Effect ◽  
Pile Groups ◽  
Element Analysis ◽  
Laterally Loaded Pile ◽  
Laterally Loaded

The behavior of laterally loaded pile groups is usually accessed by beam-on-nonlinear-Winkler-foundation (BNWF) approach employing various forms of empirically derived p-y curves and p-multipliers. Averaged p-multiplier for a particular pile group is termed as the group effect parameter. In practice, the p-y curve presented by the American Petroleum Institute (API) is most often utilized for piles in granular soils, although its shortcomings are recognized. In this study, we performed 3D finite element analysis to develop p-multipliers and group effect parameters for 3 × 3 to 5 × 5 vertically squared pile groups. The effect of the ratio of spacing to pile diameter (S/D), number of group piles, varying friction angle (φ), and pile fixity conditions on p-multipliers and group effect parameters are evaluated and quantified. Based on the simulation outcomes, a new functional form to calculate p-multipliers is proposed for pile groups. Extensive comparisons with the experimental measurements reveal that the calculated p-multipliers and group effect parameters are within the recorded range. Comparisons with two design guidelines which do not account for the pile fixity condition demonstrate that they overestimate the p-multipliers for fixed-head condition.

scholarly journals Evaluation of p-y Curves and p-multiplier of Pile Groups Corresponding to Sand Properties Change Based on 3D Numerical Analysis

2020 ◽  
Vol 20 (4) ◽  
pp. 207-217
Author(s):  
Yongjin Choi ◽  
Jaehun Ahn
Keyword(s):  
Numerical Analysis ◽  
Soil Properties ◽  
Pile Group ◽  
Friction Angle ◽  
Dominant Factor ◽  
Group Effect ◽  
Pile Groups ◽  
Dense Sand ◽  
Laterally Loaded Pile ◽  
Laterally Loaded

The <i>p-y</i> curve method and </i>p</i>-multiplier (<i>P<sub>m</sub></i>), which implies a group effect, are widely used to analyze the nonlinear behaviors of laterally loaded pile groups. Factors affecting <i>P<sub>m</sub></i> includes soil properties as well as group pile geometry and configuration. However, research on the change in <i>P<sub>m</sub></i> corresponding to soil properties has not been conducted well. In this study, in order to evaluate the effect of soil properties on the group effect in a laterally-loaded pile group installed in sandy soil, numerical analysis for a single pile and 3×3 pile group installed in loose, medium, and dense sand, was performed using the 3D numerical analysis program, Plaxis 3D. Among the factors considered in this study, the column location of the pile was the most dominant factor for <i>P<sub>m</sub></i>. The effect of the sand property change on <i>P<sub>m</sub></i> was not as significant as that of the column location of the pile. However, as the sand became denser and the friction angle increased, the group effect increased, leading to a decrease in <i>P<sub>m</sub></i> of approximately 0.1. This trend was similar to the result reported in a previous laboratory-scale experimental study.

Analysis of Vertical Bearing Capacity of Single-Row Pile Group of an Offshore Platform

2012 ◽  
Vol 188 ◽  
pp. 54-59
Author(s):  
Rui Hua Zhuo ◽  
Run Liu ◽  
Xin Li Wu ◽  
Yang Yang Zhao
Keyword(s):  
Bearing Capacity ◽  
Pile Group ◽  
Normal Operation ◽  
Deep Penetration ◽  
Group Model ◽  
Group Effect ◽  
Design Code ◽  
Vertical Bearing ◽  
Pile Group Effect ◽  
Vertical Bearing Capacity

The vertical bearing capacity of a special pile group of platform in an offshore gas field has been studied. Large diameter d (2.134 m), deep penetration l (96 m), small spacing sa (3.507 m), and only one row piles are the usual characteristics of the pile group foundation in offshore engineering. According to the requirements of the related design code, the super pile group effect has to be considered. However, with the usual design code, when sa/d, the ratio of spacing to diameter, is less than 2.0, there is no way to consider the pile group effect. In this paper, considering the occlusion effect of soil plug of pipe pile, several methods have been introduced to study the super pile group effect of the vertical bearing capacity. These methods include linear elastic theory method, the method recommended by the Code of Pile Foundation in Port Engineering (JTJ254-98), and the method with virtue of the existing pile group model test results. Meanwhile, the plugged and unplugged conditions have been considered, respectively. Through the analysis, the factors of safety in extreme and normal operation states are obtained, and the results satisfy the design specifications.

Dynamic analysis of laterally loaded pile groups in sand and clay

2002 ◽  
Vol 39 (6) ◽  
pp. 1358-1383 ◽  
Author(s):  
Yasser E Mostafa ◽  
M Hesham El Naggar
Keyword(s):  
Dynamic Loading ◽  
Dynamic Load ◽  
Load Transfer ◽  
Pile Group ◽  
Nonlinear Behaviour ◽  
Single Pile ◽  
Offshore Platforms ◽  
Group Effect ◽  
Pile Groups ◽  
Pile Head

Pile foundations supporting bridge piers, offshore platforms, and marine structures are required to resist not only static loading but also lateral dynamic loading. The static p–y curves are widely used to relate pile deflections to nonlinear soil reactions. The p-multiplier concept is used to account for the group effect by relating the load transfer curves of a pile in a group to the load transfer curves of a single pile. Some studies have examined the validity of the p-multiplier concept for the static and cyclic loading cases. However, the concept of the p-multiplier has not yet been considered for the dynamic loading case, and hence it is undertaken in the current study. An analysis of the dynamic lateral response of pile groups is described. The proposed analysis incorporates the static p–y curve approach and the plane strain assumptions to represent the soil reactions within the framework of a Winkler model. The model accounts for the nonlinear behaviour of the soil, the energy dissipation through the soil, and the pile group effect. The model was validated by analyzing the response of pile groups subjected to lateral Statnamic loading and comparing the results with field measured values. An intensive parametric study was performed employing the proposed analysis, and the results were used to establish dynamic soil reactions for single piles and pile groups for different types of sand and clay under harmonic loading with varying frequencies applied at the pile head. "Dynamic" p-multipliers were established to relate the dynamic load transfer curves of a pile in a group to the dynamic load transfer curves for a single pile. The dynamic p-multipliers were found to vary with the spacing between piles, soil type, peak amplitude of loading, and the angle between the line connecting any two piles and the direction of loading. The study indicated the effect of pile material and geometry, pile installation method, and pile head conditions on the p-multipliers. The calculated p-multipliers compared well with p-multipliers back-calculated from full scale field tests.Key words: lateral, transient loading, nonlinear, pile–soil–pile interaction, p–y curves, Statnamic.

Sign in / Sign up

Export Citation Format

Share Document