Fault diagnosis model based on fuzzy support vector machine combined with weighted fuzzy clustering

2013 ◽  
Vol 19 (3) ◽  
pp. 174-181 ◽  
Author(s):  
Junhong Zhang ◽  
Wenpeng Ma ◽  
Liang Ma ◽  
Zhenpeng He
Energies ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 960 ◽  
Author(s):  
Fang Yuan ◽  
Jiang Guo ◽  
Zhihuai Xiao ◽  
Bing Zeng ◽  
Wenqiang Zhu ◽  
...  

The condition monitoring and fault diagnosis of power transformers plays a significant role in the safe, stable and reliable operation of the whole power system. Dissolved gas analysis (DGA) methods are widely used for fault diagnosis, however, their accuracy is limited by the selection of DGA features and the performance of fault diagnosis models, for example, the classical support vector machine (SVM), is easily affected by unbalanced training samples. This paper presents a transformer fault diagnosis model based on chemical reaction optimization and a twin support vector machine. Twin support vector machines (TWSVMs) are used as classifiers for solving problems involving unbalanced and insufficient samples. Restricted Boltzmann machines (RBMs) are used for data preprocessing to ensure the effective identification of feature parameters and improve the efficiency and accuracy of fault diagnosis. The chemical reaction optimization (CRO) algorithm is used to optimize TWSVM parameters to select the optimal training parameters. The cross-validation (CV) method is used to ensure the reliability and generalization ability of the diagnostic model. Finally, the validity of the model is verified using real fault samples and random testing.


2018 ◽  
Vol 88-90 ◽  
pp. 1274-1280 ◽  
Author(s):  
Mei Fei ◽  
Liu Ning ◽  
Miao Huiyu ◽  
Pan Yi ◽  
Sha Haoyuan ◽  
...  

2019 ◽  
Vol 118 ◽  
pp. 02036 ◽  
Author(s):  
Hankun Bing ◽  
Yuzhu Zhao ◽  
Le Pang ◽  
Minmin Zhao

Based on the concept of information entropy, this paper analyzes typical nonlinear vibration fault signals of steam turbine based on spectrum, wavelet and HHT theory methods, and extracts wavelet energy spectrum entropy, IMF energy spectrum entropy, time domain singular value entropy and frequency domain power spectrum entropy as faults. The feature is supported by a support vector machine (SVM) as a learning platform. The research results show that the fusion information entropy describes the vibration fault more comprehensively, and the support vector machine fault diagnosis model can achieve higher diagnostic accuracy.


Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4170 ◽  
Author(s):  
Bing Zeng ◽  
Jiang Guo ◽  
Wenqiang Zhu ◽  
Zhihuai Xiao ◽  
Fang Yuan ◽  
...  

Dissolved gas analysis (DGA) is a widely used method for transformer internal fault diagnosis. However, the traditional DGA technology, including Key Gas method, Dornenburg ratio method, Rogers ratio method, International Electrotechnical Commission (IEC) three-ratio method, and Duval triangle method, etc., suffers from shortcomings such as coding deficiencies, excessive coding boundaries and critical value criterion defects, which affect the reliability of fault analysis. Grey wolf optimizer (GWO) is a novel swarm intelligence optimization algorithm proposed in 2014 and it is easy for the original GWO to fall into the local optimum. This paper presents a new meta-heuristic method by hybridizing GWO with differential evolution (DE) to avoid the local optimum, improve the diversity of the population and meanwhile make an appropriate compromise between exploration and exploitation. A fault diagnosis model of hybrid grey wolf optimized least square support vector machine (HGWO-LSSVM) is proposed and applied to transformer fault diagnosis with the optimal hybrid DGA feature set selected as the input of the model. The kernel principal component analysis (KPCA) is used for feature extraction, which can decrease the training time of the model. The proposed method shows high accuracy of fault diagnosis by comparing with traditional DGA methods, least square support vector machine (LSSVM), GWO-LSSVM, particle swarm optimization (PSO)-LSSVM and genetic algorithm (GA)-LSSVM. It also shows good fitness and fast convergence rate. Accuracies calculated in this paper, however, are significantly affected by the misidentifications of faults that have been made in the DGA data collected from the literature.


2013 ◽  
Vol 20 (2) ◽  
pp. 341-349 ◽  
Author(s):  
Cheng-Wei Fei ◽  
Guang-Chen Bai

In order to correctly analyze aeroengine whole-body vibration signals, Wavelet Correlation Feature Scale Entropy (WCFSE) and Fuzzy Support Vector Machine (FSVM) (WCFSE-FSVM) method was proposed by fusing the advantages of the WCFSE method and the FSVM method. The wavelet coefficients were known to be located in high Signal-to-Noise Ratio (S/N or SNR) scales and were obtained by the Wavelet Transform Correlation Filter Method (WTCFM). This method was applied to address the whole-body vibration signals. The WCFSE method was derived from the integration of the information entropy theory and WTCFM, and was applied to extract the WCFSE values of the vibration signals. Among the WCFSE values, theWFSE1andWCFSE2values on the scale 1 and 2 from the high band of vibration signal were believed to acceptably reflect the vibration feature and were selected to construct the eigenvectors of vibration signals as fault samples to establish the WCFSE-FSVM model. This model was applied to aeroengine whole-body vibration fault diagnosis. Through the diagnoses of four vibration fault modes and the comparison of the analysis results by four methods (SVM, FSVM, WESE-SVM, WCFSE-FSVM), it is shown that the WCFSE-FSVM method is characterized by higher learning ability, higher generalization ability and higher anti-noise ability than other methods in aeroengine whole-vibration fault analysis. Meanwhile, this present study provides a useful insight for the vibration fault diagnosis of complex machinery besides an aeroengine.


Sign in / Sign up

Export Citation Format

Share Document