Production of the Minor Ginsenoside F2 from the PPD-mix-type Major Ginsenosides Using a Novel Recombinant Glycoside Hydrolase from Novosphingobium aromaticivorans

Background: Several studies have reported that ginsenoside Rg3(S) is effective in treating metastatic diseases, obesity, and various cancers, however, its presence in white ginseng cannot be estimated, and only a limited amount is present in red ginseng. Therefore, the use of recombinant glycosidases from a Generally Recognized As Safe (GRAS) host strain is a promising approach to enhance production of Rg3(S), which may improve nutritional activity, human health, and quality of life. Method: Lactobacillus ginsenosidimutans EMML 3041T, which was isolated from Korean fermented pickle (kimchi), presents ginsenoside-converting abilities. The strain was used to enrich the production of Rg3(S) by fermenting protopanaxadiol (PPD)-mix-type major ginsenosides (Rb1, Rb2, Rc, and Rd) in four different types of food-grade media (1, MRS; 2, Basel Food-Grade medium; 3, Basel Food-Grade medium-I, and 4, Basel Food-Grade medium-II). Due to its tendency to produce Rg3(S), the presence of glycoside hydrolase in Lactobacillus ginsenosidimutans was proposed, the whole genome was sequenced, and the probable glycoside hydrolase gene for ginsenoside conversion was cloned. Results: The L. ginsenosidimutans EMML 3041T strain was whole genome sequenced to identify the target genes. After genome sequencing, 12 sets of glycoside hydrolases were identified, of which seven sets (α,β-glucosidase and α,β-galactosidase) were cloned in Escherichia coli BL21 (DE3) using the pGEX4T-1 vector system. Among the sets of clones, only one clone (BglL.gin-952) showed ginsenoside-transforming abilities. The recombinant BglL.gin-952 comprised 952 amino acid residues and belonged to glycoside hydrolase family 3. The enzyme exhibited optimal activity at 55 °C and a pH of 7.5 and showed a promising conversion ability of major ginsenoside Rb1→Rd→Rg3(S). The recombinant enzyme (GST-BglL.gin-952) was used to mass produce Rg3(S) from major ginsenoside Rb1. Scale-up of production using 50 g of Rb1 resulted in 30 g of Rg3(S) with 74.3% chromatography purity. Conclusion: Our preliminary data demonstrated that this enzyme would be beneficial in the preparation of pharmacologically active minor ginsenoside Rg3(S) in the functional food and pharmaceutical industries.

Download Full-text

Faculty Opinions recommendation of A rice family 9 glycoside hydrolase isozyme with broad substrate specificity for hemicelluloses in type II cell walls.

Faculty Opinions – Post-Publication Peer Review of the Biomedical Literature ◽

10.3410/f.722918335.793513580 ◽

2016 ◽

Author(s):

Daniel Cosgrove

Keyword(s):

Substrate Specificity ◽

Cell Walls ◽

Glycoside Hydrolase ◽

Type Ii ◽

Broad Substrate Specificity ◽

Type Ii Cell

Download Full-text

Cloning and Characterization of a Novel Wheat Glycoside Hydrolase Gene TaGlc2 Induced by Powdery Mildew Pathogen (Erysiphe graminis) Infection

ACTA AGRONOMICA SINICA ◽

10.3724/sp.j.1006.2009.00786 ◽

2009 ◽

Vol 35 (5) ◽

pp. 786-794

Author(s):

N PUDAKE Ramesh ◽

Ming-Ming XIN ◽

Yu-Jing YIN ◽

Chao-Jie XIE ◽

Zhong-Fu NI ◽

...

Keyword(s):

Powdery Mildew ◽

Glycoside Hydrolase ◽

Erysiphe Graminis ◽

Powdery Mildew Pathogen

Download Full-text

Xylanases of glycoside hydrolase family 30 – An overview

Biotechnology Advances ◽

10.1016/j.biotechadv.2021.107704 ◽

2021 ◽

Vol 47 ◽

pp. 107704

Author(s):

Vladimír Puchart ◽

Katarína Šuchová ◽

Peter Biely

Keyword(s):

Glycoside Hydrolase ◽

Glycoside Hydrolase Family ◽

Hydrolase Family ◽

Glycoside Hydrolase Family 30

Download Full-text

Modeled 3D-Structures of Proteobacterial Transglycosylases from Glycoside Hydrolase Family 17 Give Insight in Ligand Interactions Explaining Differences in Transglycosylation Products

Applied Sciences ◽

10.3390/app11094048 ◽

2021 ◽

Vol 11 (9) ◽

pp. 4048

Author(s):

Javier A. Linares-Pastén ◽

Lilja Björk Jonsdottir ◽

Gudmundur O. Hreggvidsson ◽

Olafur H. Fridjonsson ◽

Hildegard Watzlawick ◽

...

Keyword(s):

Glycoside Hydrolase ◽

Ligand Docking ◽

Glycoside Hydrolase Family ◽

Ligand Interactions ◽

Tim Barrel ◽

Branching Point ◽

The Difference ◽

Dynamics Simulations ◽

And Function ◽

Hydrolase Family

The structures of glycoside hydrolase family 17 (GH17) catalytic modules from modular proteins in the ndvB loci in Pseudomonas aeruginosa (Glt1), P. putida (Glt3) and Bradyrhizobium diazoefficiens (previously B. japonicum) (Glt20) were modeled to shed light on reported differences between these homologous transglycosylases concerning substrate size, preferred cleavage site (from reducing end (Glt20: DP2 product) or non-reducing end (Glt1, Glt3: DP4 products)), branching (Glt20) and linkage formed (1,3-linkage in Glt1, Glt3 and 1,6-linkage in Glt20). Hybrid models were built and stability of the resulting TIM-barrel structures was supported by molecular dynamics simulations. Catalytic amino acids were identified by superimposition of GH17 structures, and function was verified by mutagenesis using Glt20 as template (i.e., E120 and E209). Ligand docking revealed six putative subsites (−4, −3, −2, −1, +1 and +2), and the conserved interacting residues suggest substrate binding in the same orientation in all three transglycosylases, despite release of the donor oligosaccharide product from either the reducing (Glt20) or non-reducing end (Glt1, Gl3). Subsites +1 and +2 are most conserved and the difference in release is likely due to changes in loop structures, leading to loss of hydrogen bonds in Glt20. Substrate docking in Glt20 indicate that presence of covalently bound donor in glycone subsites −4 to −1 creates space to accommodate acceptor oligosaccharide in alternative subsites in the catalytic cleft, promoting a branching point and formation of a 1,6-linkage. The minimum donor size of DP5, can be explained assuming preferred binding of DP4 substrates in subsite −4 to −1, preventing catalysis.

Download Full-text

Understanding the Polymerization Mechanism of Glycoside-Hydrolase Family 70 Glucansucrases

Journal of Biological Chemistry ◽

10.1016/s0021-9258(19)84038-3 ◽

2006 ◽

Vol 281 (42) ◽

pp. 31254-31267

Author(s):

Claire Moulis ◽

Gilles Joucla ◽

David Harrison ◽

Emeline Fabre ◽

Gabrielle Potocki-Veronese ◽

...

Keyword(s):

Glycoside Hydrolase ◽

Glycoside Hydrolase Family ◽

Polymerization Mechanism ◽

Hydrolase Family

Download Full-text

Endo-fucoidan hydrolases from glycoside hydrolase family 107 (GH107) display structural and mechanistic similarities to α-l-fucosidases from GH29

Journal of Biological Chemistry ◽

10.1074/jbc.ra118.005134 ◽

2018 ◽

Vol 293 (47) ◽

pp. 18296-18308 ◽

Cited By ~ 10

Author(s):

Chelsea Vickers ◽

Feng Liu ◽

Kento Abe ◽

Orly Salama-Alber ◽

Meredith Jenkins ◽

...

Keyword(s):

Glycoside Hydrolase ◽

Biological Activities ◽

Bacterial Species ◽

Structural Data ◽

Side Chain ◽

Glycoside Hydrolase Family ◽

X Ray Crystallography ◽

Catalytic Mechanisms ◽

Thickening Agents ◽

Hydrolase Family

Fucoidans are chemically complex and highly heterogeneous sulfated marine fucans from brown macro algae. Possessing a variety of physicochemical and biological activities, fucoidans are used as gelling and thickening agents in the food industry and have anticoagulant, antiviral, antitumor, antibacterial, and immune activities. Although fucoidan-depolymerizing enzymes have been identified, the molecular basis of their activity on these chemically complex polysaccharides remains largely uninvestigated. In this study, we focused on three glycoside hydrolase family 107 (GH107) enzymes: MfFcnA and two newly identified members, P5AFcnA and P19DFcnA, from a bacterial species of the genus Psychromonas. Using carbohydrate-PAGE, we show that P5AFcnA and P19DFcnA are active on fucoidans that differ from those depolymerized by MfFcnA, revealing differential substrate specificity within the GH107 family. Using a combination of X-ray crystallography and NMR analyses, we further show that GH107 family enzymes share features of their structures and catalytic mechanisms with GH29 α-l-fucosidases. However, we found that GH107 enzymes have the distinction of utilizing a histidine side chain as the proposed acid/base catalyst in its retaining mechanism. Further interpretation of the structural data indicated that the active-site architectures within this family are highly variable, likely reflecting the specificity of GH107 enzymes for different fucoidan substructures. Together, these findings begin to illuminate the molecular details underpinning the biological processing of fucoidans.

Download Full-text

Evolution of a major virion protein of the giant pandoraviruses from an inactivated bacterial glycoside hydrolase

Virus Evolution ◽

10.1093/ve/veaa059 ◽

2020 ◽

Vol 6 (2) ◽

Cited By ~ 2

Author(s):

Mart Krupovic ◽

Natalya Yutin ◽

Eugene Koonin

Keyword(s):

Glycoside Hydrolase ◽

Carbohydrate Binding ◽

Virion Protein ◽

Gene Encoding ◽

Dna Viruses ◽

Virus Particles ◽

Major Increase ◽

A Minor ◽

Particle Shapes ◽

Icosahedral Capsid

Abstract The diverse viruses in the phylum Nucleocytoviricota (also known as NLCDVs, Nucleo-cytoplasmic Large DNA Viruses) typically possess large icosahedral virions. However, in several families of Nucleocytoviricota, the icosahedral capsid was replaced by irregular particle shapes, most notably, the amphora-like virions of pandoraviruses and pithoviruses, the largest known virus particles in the entire virosphere. Pandoraviruses appear to be the most highly derived viruses in this phylum because their evolution involved not only the change in the virion shape, but also, the actual loss of the gene encoding double-jelly roll major capsid protein (DJR MCP), the main building block of icosahedral capsids in this virus assemblage. Instead, pandoravirus virions are built of unrelated abundant proteins. Here we show that the second most abundant virion protein of pandoraviruses, major virion protein 2 (MVP2), evolved from an inactivated derivative of a bacterial glycoside hydrolase of the GH16 family. The ancestral form of MVP2 was apparently acquired early in the evolution of the Nucleocytoviricota, to become a minor virion protein. After a duplication in the common ancestor of pandoraviruses and molliviruses, one of the paralogs displaces DJR MCP in pandoraviruses, conceivably, opening the way for a major increase in the size of the virion and the genome. Exaptation of a carbohydrate-binding protein for the function of the MVP is a general trend in virus evolution and might underlie the transformation of the virion shape in other groups of the Nucleocytoviricota as well.

Download Full-text