scholarly journals Thermal comfort in winter incorporating solar radiation effects at high altitudes and performance of improved passive solar design—Case of Lhasa

Author(s):  
Lingjiang Huang ◽  
Jian Kang

AbstractThe solar incidence on an indoor environment and its occupants has significant impacts on indoor thermal comfort. It can bring favorable passive solar heating and can result in undesired overheating (even in winter). This problem becomes more critical for high altitudes with high intensity of solar irradiance, while received limited attention. In this study, we explored the specific overheating and rising thermal discomfort in winter in Lhasa as a typical location of a cold climate at high altitudes. First, we evaluated the thermal comfort incorporating solar radiation effect in winter by field measurements. Subsequently, we investigated local occupant adaptive responses (considering the impact of direct solar irradiance). This was followed by a simulation study of assessment of annual based thermal comfort and the effect on energy-saving potential by current solar adjustment. Finally, we discussed winter shading design for high altitudes for both solar shading and passive solar use at high altitudes, and evaluated thermal mass shading with solar louvers in terms of indoor environment control. The results reveal that considerable indoor overheating occurs during the whole winter season instead of summer in Lhasa, with over two-thirds of daytime beyond the comfort range. Further, various adaptive behaviors are adopted by occupants in response to overheating due to the solar radiation. Moreover, it is found that the energy-saving potential might be overestimated by 1.9 times with current window to wall ratio requirements in local design standards and building codes due to the thermal adaption by drawing curtains. The developed thermal mass shading is efficient in achieving an improved indoor thermal environment by reducing overheating time to an average of 62.2% during the winter and a corresponding increase of comfort time.

2019 ◽  
Vol 202 ◽  
pp. 109390 ◽  
Author(s):  
Shenglan Jing ◽  
Yonggang Lei ◽  
Hongjian Wang ◽  
Chongfang Song ◽  
Xufeng Yan

Author(s):  
Kuan-Heng Yu ◽  
Emanuel Jaimes ◽  
Chi-Chuan Wang

Abstract This study investigates the performance of an optimal indoor environment in a campus classroom. The control system is able to regulate and balance the needs for illuminance, thermal comfort, air quality, and energy saving. By incorporating with Machine Learning and illumination algorithm associated with Internet of Things, wireless communication and adapted control, optimal energy saving and environment control can be achieved. Additionally, by using Video Image Detection to analyze the number of occupants and distribution in the classroom offers better energy optimization. In this study, the split-type air conditioning system has been used which is different from that in most literatures. About 30 tests are conducted and the occupant numbers range from 1 to 2 hours and each hour is 50 minutes. The class types include normal lecture and examination which shows completely different characteristics. The proposed AI agent contains the benefits not only for small or medium indoor space, but also for residences. In order to adjust the indoor illuminance, wireless and adjustable illuminance level LED were installed. Under the control of the illumination algorithm, the illuminance of each area of the classroom can be optimized according to the occupant distribution. The test results indicate that, by maintaining thermal comfort and air quality, when comparing with fixed setting point control 25 degrees, the average energy saving is 19%, and the average CO2 concentration is decreased by 21.3%. When comparing with setting point temperature of 26 degrees, the average energy saving is 15% the average CO2 is decreased by 12.9%.


2011 ◽  
Vol 224 ◽  
pp. 115-119 ◽  
Author(s):  
Ismail Muhammad Azzam ◽  
Abdul Rashid Fahanim

Achieving thermal comfort in the tropical climate of Malaysia is always a great challenge for any house designer or builder. Although some practical solutions have been developed over centuries through the slow but constant evolution of indigenous houses such the Malay house, the longhouses in Borneo and the Chinese townhouses in Melaka, their integration into contemporary designs have been hampered by various modern constraints. For instance, building the Malay house in urban areas is deemed unsuitable due to the need for wide land lots and their perceptively fragile building materials that do not allay any security worries. The lack of skilled carpenters for building such a house is also a worsening problem. Hence, new and innovative strategies to achieve thermal comfort for contemporary houses are greatly needed to serve the needs and expectations of an urbanized society. One method that has been studied and proved successful is the Smart and Cool Home system which was first used at a private bungalow in Semenyih, Malaysia. The overarching principle of this system is to reverse the role of the building envelope from being a thermal mass into a heat sink which effectively reduces heat gains and allow the occupants inside to easily adapt to a milder indoor environment. This paper describes this house in detail and provides some understanding of the principles involved.


Sign in / Sign up

Export Citation Format

Share Document