Measurement Uncertainty in Airborne Sound Insulation and Single-Number Quantities: Strategy and Implementation in Indian Scenario

MAPAN ◽  
2015 ◽  
Vol 31 (1) ◽  
pp. 43-55 ◽  
Author(s):  
N. Garg ◽  
A. Kumar ◽  
S. Maji
Keyword(s):  
Measurement Uncertainty ◽  
Sound Insulation ◽  
Airborne Sound ◽  
Single Number ◽  
Indian Scenario

Optimized single-number quantity for rating the airborne sound insulation of constructions: Living sounds

2016 ◽  
Vol 140 (6) ◽  
pp. 4428-4436 ◽  
Author(s):  
Petra Virjonen ◽  
Valtteri Hongisto ◽  
David Oliva
Keyword(s):  
Sound Insulation ◽  
Airborne Sound ◽  
Single Number

scholarly journals IMPLEMENTATION OF LABORATORY MEASUREMENT OF AIRBORNE SOUND INSULATION BASED ON ISO AND ASTM STANDARDS IN NATIONAL STANDARDIZATION AGENCY OF INDONESIA (BSN)

2021 ◽  
Vol 23 (1) ◽  
pp. 77
Author(s):  
Bondan Dwisetyo ◽  
Maharani Ratna Palupi ◽  
Fajar Budi Utomo ◽  
Chery Chaen Putri ◽  
Dodi Rusjadi ◽  
...  
Keyword(s):  
Transmission Loss ◽  
Laboratory Measurement ◽  
Sound Insulation ◽  
Reference Curve ◽  
Airborne Sound ◽  
Significant Difference ◽  
Single Number ◽  
Sound Reduction ◽  
Reduction Index

<p>The implementation of laboratory measurement of airborne sound insulation based on ISO and ASTM standards was carried out at SNSU BSN. The aim of this work to realize the measurement of airborne sound insulation for several sample tests, where the procedure of the test is performed according to the updated standard ISO 10140 and ASTM E90. Besides, the single number rating also is determined based on ISO 717-1 and ASTM E413. This measurement has been conducted in the two reverberation rooms using pressure method consist of measuring the sound pressure level, measuring the reverberation time, obtaining the sound reduction index (R) or sound transmission loss (STL), and determination of a single-number ratings of the samples test. From the results, some parameter requirements such as the frequency range and the rounding procedure of R or STL influence the measurement result slightly. Subsequently, the significant difference is obtained for the determination of single number rating in the shifting procedure of the reference curve.</p>

A Comparative Study of Sound Transmission Loss Provided by Glass, Acrylic and Polycarbonate

2013 ◽  
Vol 60 (1) ◽  
Author(s):  
Elwaleed Awad Khidir ◽  
Zambri Harun ◽  
Mohd Jailani Mohd Nor ◽  
Muhamad Razi
Keyword(s):  
Transmission Loss ◽  
Sound Transmission ◽  
Sound Insulation ◽  
Sound Transmission Loss ◽  
Material Density ◽  
Airborne Sound ◽  
Single Number ◽  
Reverberation Chambers ◽  
Sound Reduction ◽  
Reduction Index

This article presents an assessment for the airborne sound insulation provided by single glazed panels. The glazed panels were glass, acrylic and polycarbonate with a thickness of 4 mm. The experiments were conducted in a transmission loss facility consisting of semi anechoic and reverberation chambers. The panels were subjected to airborne sound and the data collected. Glass, acrylic and polycarbonate panel absorb noise most effectively above 500 Hz with the absorption peaks at 1000 Hz. The single number sound reduction index (RW) for glass, polycarbonate and acrylic were 41 dB, 38 dB and 37 dB, respectively. This could be attributed mainly to the material density which is higher for the glass. Keywords: Sound transmission loss; glazing; insulation; weighted index

scholarly journals Validation of a 1:8 Scale Measurement Stand for Testing Airborne Sound Insulation

Sensors ◽  
2021 ◽  
Vol 21 (19) ◽  
pp. 6663
Author(s):  
Agata Szeląg ◽  
Katarzyna Baruch-Mazur ◽  
Krzysztof Brawata ◽  
Bartosz Przysucha ◽  
Dominik Mleczko
Keyword(s):  
Measurement Uncertainty ◽  
Science And Technology ◽  
Full Scale ◽  
Sound Insulation ◽  
Small Scale ◽  
Full Size ◽  
Testing Methodology ◽  
Airborne Sound ◽  
Uncertainty Of Measurements

This paper contains a detailed description of the design and validation of a measurement stand for testing the airborne sound insulation of specimens made at a small scale. The stand is comprised of two coupled reverberation rooms in which the geometry represents the full-size reverberation rooms used at the AGH University of Science and Technology at a 1:8 scale. The paper proves that both the scaled measurement stand and the testing methodology conform to the ISO 10140 standards, and that the obtained measurement uncertainty does not exceed the maximum values specified in ISO 12999-1. Moreover, the calculated uncertainty of measurements obtained for the 1:8 scale stand is comparable with the typical uncertainty given in ISO 12999-1 and the uncertainty obtained on the full-scale measurement stand. In connection with the above, the authors have proved that by using the scaled-down measurement stands, one can obtain reliable and repeatable results of measurements of airborne sound insulation.

Reproducibility of the Present and the Proposed Single-Number Quantities of Airborne Sound Insulation

2012 ◽  
Vol 98 (5) ◽  
pp. 811-819 ◽  
Author(s):  
Valtteri Hongisto ◽  
Jukka Keränen ◽  
Mikko Kylliäinen ◽  
Jeffrey Mahn
Keyword(s):  
Sound Insulation ◽  
Airborne Sound ◽  
Single Number

The Uncertainty of the Proposed Single Number Ratings for Airborne Sound Insulation

2012 ◽  
Vol 19 (3) ◽  
pp. 145-172 ◽  
Author(s):  
Jeffrey Mahn ◽  
John Pearse
Keyword(s):  
Sound Insulation ◽  
Airborne Sound ◽  
Single Number

scholarly journals Assessment of the airborne sound insulation from mobility vibration measurements; a hybrid experimental numerical approach

2018 ◽  
Vol 432 ◽  
pp. 680-698 ◽  
Author(s):  
N.B. Roozen ◽  
Q. Leclère ◽  
D. Urbán ◽  
T. Méndez Echenagucia ◽  
P. Block ◽  
...  
Keyword(s):  
Numerical Approach ◽  
Sound Insulation ◽  
Vibration Measurements ◽  
Airborne Sound
Sign in / Sign up

Export Citation Format

Share Document