Construction of Frozen Sandstone Creep Damage Model and Analysis of Influencing Factors Based on Fractional-Order Theory

2021 ◽  
Author(s):  
Zuyong Li ◽  
Gengshe Yang ◽  
Yao Wei
Keyword(s):  
Influencing Factors ◽  
Fractional Order ◽  
Damage Model ◽  
Creep Damage ◽  
Order Theory ◽  
Creep Damage Model

Non-linear creep damage model of sandstone under freeze-thaw cycle

2021 ◽  
Vol 28 (3) ◽  
pp. 954-967
Author(s):  
Jie-lin Li ◽  
Long-yin Zhu ◽  
Ke-ping Zhou ◽  
Hui Chen ◽  
Le Gao ◽  
...  
Keyword(s):  
Damage Model ◽  
Creep Damage ◽  
Freeze Thaw ◽  
Thaw Cycle ◽  
Linear Creep ◽  
Non Linear ◽  
Freeze Thaw Cycle ◽  
Creep Damage Model

An improved nonlinear damage model of rocks considering initial damage and damage evolution

2020 ◽  
Vol 29 (7) ◽  
pp. 1117-1137 ◽  
Author(s):  
Wenlin Feng ◽  
Chunsheng Qiao ◽  
Shuangjian Niu ◽  
Zhao Yang ◽  
Tan Wang
Keyword(s):  
Damage Evolution ◽  
Least Squares Method ◽  
Damage Model ◽  
Creep Damage ◽  
Secondary Creep ◽  
Nonlinear Creep ◽  
Creep Failure ◽  
Initial Damage ◽  
Nonlinear Damage Model ◽  
Creep Damage Model

The experimental results show that the creep properties of the rocks are affected by the initial damage, and the damage evolution also has a significant impact on the time-dependent properties of the rocks during the creep. However, the effects of the initial damage and the damage evolution are seldom considered in the current study of the rocks' creep models. In this paper, a new nonlinear creep damage model is proposed based on the multistage creep test results of the sandstones with different damage degrees. The new nonlinear creep damage model is improved based on the Nishihara model. The influences of the initial damage and the damage evolution on the components in the Nishihara model are considered. The creep damage model can not only describe the changes in three creep stages, namely, the primary creep, the secondary creep, and the tertiary creep, but also reflect the influence of the initial damage and the damage evolution on creep failure. The nonlinear least squares method is used to determine the parameters in the nonlinear creep damage model. The consistency between the experimental data and the predicted results indicates the applicability of the nonlinear damage model to accurately predict the creep deformation of the rocks with initial damage.

scholarly journals The Creep-Damage Model of Salt Rock Based on Fractional Derivative

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2349 ◽  
Author(s):  
Hongwei Zhou ◽  
Di Liu ◽  
Gang Lei ◽  
Dongjie Xue ◽  
Yang Zhao
Keyword(s):  
Fractional Derivative ◽  
Creep Test ◽  
Damage Model ◽  
Creep Damage ◽  
Uniaxial Stress ◽  
Radioactive Waste Disposal ◽  
Creep Process ◽  
Salt Rock ◽  
Damage Process ◽  
Creep Damage Model

The use of salt rock for underground radioactive waste disposal facilities requires a comprehensive analysis of the creep-damage process in salt rock. A computer-controlled creep setup was employed to carry out a creep test of salt rock that lasted as long as 359 days under a constant uniaxial stress. The acoustic emission (AE) space-time evolution and energy-releasing characteristics during the creep test were studied in the meantime. A new creep-damage model is proposed on the basis of a fractional derivative by combining the AE statistical regularity. It indicates that the AE data in the non-decay creep process of salt rock can be divided into three stages. Furthermore, the authors propose a new creep-damage model of salt rock based on a fractional derivative. The parameters in the model were determined by the Quasi-Newton method. The fitting analysis suggests that the new creep-damage model provides a precise description of full creep regions in salt rock.

A nonlinear creep damage model for salt rock

2018 ◽  
Vol 28 (5) ◽  
pp. 758-771 ◽  
Author(s):  
Fei Wu ◽  
Jie Chen ◽  
Quanle Zou
Keyword(s):  
Test Data ◽  
Damage Model ◽  
Creep Damage ◽  
Nonlinear Creep ◽  
Salt Rock ◽  
Creep Tests ◽  
Nonlinear Constitutive Equation ◽  
Damage Constitutive Model ◽  
Creep Damage Model ◽  
Actual Stress

In the creep tests, stress is no longer a constant and increases gradually under the influence of damage occurring during accelerating creep, which is a slow-loading process rather than a conventional creep. With the accumulation of the damage over time, the actual stress increases greatly. The increased actual stress not only generates loading strain but also causes the steady creep rate to rise. This coupling possibly explains why salt rock presents nonlinear accelerating characteristics at the accelerating creep stage. In this work, the constraint of the present creep concept was overcome by assuming that the acceleration creep phase is a coupling process of loading and creeping. Furthermore, we demonstrate that the total strain in this phase is equal to the sum of loading strain and creeping strain. A new nonlinear constitutive equation for creep was then derived, and the mechanisms underlying the nonlinear accelerating characteristics emerging at the stage of accelerating creep are further explained. A step-loading experiment on salt rock was performed for a period of six months. The characteristics of accelerating creep appeared in the last step of loading. This new nonlinear creep damage constitutive model was used to fit and analyze the test data. Obtained results show that this model fits well to these test data and also favorably represents the nonlinear characteristics of accelerating creep, thus supporting the model’s validity.

Peridynamics Implementation of Liu Murakami Creep Damage Model in Moose Framework

2021 ◽  
Author(s):  
Erdogan Madenci ◽  
Pranesh Roy ◽  
Deepak Kumar Behera
Keyword(s):  
Damage Model ◽  
Creep Damage ◽  
Creep Damage Model

Fatigue–oxidation–creep damage model under axial-torsional thermo-mechanical loading

2019 ◽  
Vol 29 (5) ◽  
pp. 810-830 ◽  
Author(s):  
Dao-Hang Li ◽  
De-Guang Shang ◽  
Jin Cui ◽  
Luo-Jin Li ◽  
Ling-Wan Wang ◽  
...  
Keyword(s):  
Damage Model ◽  
Creep Damage ◽  
Fatigue Loading ◽  
Damage Mechanism ◽  
Critical Crack ◽  
Critical Crack Length ◽  
Mechanical Fatigue ◽  
Proposed Model ◽  
Oxidation Damage ◽  
Creep Damage Model

A fatigue–oxidation–creep damage model that can take into account the effect of multiaxial cyclic feature on the damage mechanism is proposed under axial-torsional thermo-mechanical fatigue loading. In the proposed model, the effects of non-proportional additional hardening on fatigue, oxidation, and creep damages are considered, and the variation of oxidation damage under different high temperature loading conditions is also described. Moreover, the intergranular creep damage needs to be equivalent to the transgranular damage before accumulating with the fatigue and oxidation damages. The fatigue, oxidation, and creep damages can be expressed as the fractions of fatigue life, critical crack length, and creep rupture time, respectively, which allows the linear accumulation of different types of damages on the basis of life fraction rule. In addition, the proposed model is validated by various fatigue experimental results, including uniaxial thermo-mechanical fatigue, axial-torsional thermo-mechanical fatigue, and isothermal axial-torsional fatigue under proportional and non-proportional loadings. The results showed that the errors are within a factor of 2.

Creep Failure Simulations for 316H at 550°C

2012 ◽  
Author(s):  
Nak Hyun Kim ◽  
Yun Jae Kim ◽  
Catrin M. Davies ◽  
Kamran M. Nikbin ◽  
David W. Dean
Keyword(s):  
Experimental Data ◽  
Damage Model ◽  
Creep Damage ◽  
Inelastic Strain ◽  
Compact Tension ◽  
Creep Failure ◽  
Creep Ductility ◽  
Summation Rule ◽  
Creep Damage Model ◽  
Damage Summation

In this work a method to simulate failure due to creep is proposed using finite element damage analysis. The creep damage model is based on the creep ductility exhaustion concept. Incremental damage is defined by the ratio of incremental inelastic (plastic & creep) strain and multi-axial ductility. A simple linear damage summation rule is applied. When accumulated damage becomes unity, element stresses are reduced to almost zero to simulate progressive crack growth. The model is validated through comparison with experimental data on various sized compact tension, C(T), specimens of 316H stainless steel at 550 °C. The influence of the inelastic strain rate on the uniaxial ductility is considered. Good agreement is found between the simulated results and the experimental data.

Sign in / Sign up

Export Citation Format

Share Document