scholarly journals Fabrication of reduced graphene oxide modified poly(3,4-ethylenedioxythiophene) polystyrene sulfonate based transparent conducting electrodes for flexible optoelectronic application

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Sandeep Sharma ◽  
Karamvir Singh ◽  
Sandeep Kumar ◽  
Kapil Bhatt ◽  
Yashashchandra Dwivedi ◽  
...  

AbstractPresent article reports on reduced graphene oxide (rGO) modified poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT: PSS) based transparent conducting electrodes for flexible optoelectronic applications. PEDOT: PSS samples embedded with different rGO concentrations i.e. 0, 1, 2, 3, 4, 5 wt% were prepared and later on, bar coated on polyethylene terephthalate substrate using a 30 μm wire size bar. Various parameters including sheet resistance, bending test (outside and inside bending), optical transmittance etc. were estimated. Our analysis indicates that the samples with 1 wt% rGO possess improved results i.e. low sheet resistance (315 ± 8 Ω/sq.) and high transmittance (~ 74%). Additionally, the sample shows low electrical resistance variation up to 12% (maximum increase) during outward bending and 9% (maximum decrease) during inward bending of the sample for bending curvature from 20 to 100 m−1.

RSC Advances ◽  
2016 ◽  
Vol 6 (58) ◽  
pp. 53123-53129 ◽  
Author(s):  
Ali Sephar Shikoh ◽  
Zubair Ahmad ◽  
Farid Touati ◽  
R. A. Shakoor ◽  
N. J. Al-Thani ◽  
...  

We demonstrate, a newly developed, inexpensive transparent conducting electrode based on copper nanowires combined with reduced graphene oxide and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate as a cathode for dye sensitized photo sensors.


2017 ◽  
Vol 425 ◽  
pp. 558-563 ◽  
Author(s):  
Raj Kumar ◽  
R. Manoj Kumar ◽  
Parthasarathi Bera ◽  
S. Ariharan ◽  
Debrupa Lahiri ◽  
...  

NANO ◽  
2021 ◽  
pp. 2150067
Author(s):  
Mohd Faizol Abdullah

Gold nanoparticles (AuNPs)-decorated reduced graphene oxide (rGO) is a compelling material from both aspects of processing and functionality. This paper presents an alternative method to prepare and alter the optoelectronic properties of the AuNPs-rGO hybrid film. Au was sputtered for a duration of 0–60 s on graphene oxide (GO) film before subjected to thermal reduction at 700∘C. The surface of rGO was decorated by spherical AuNPs with a mean particle size of around 10[Formula: see text]nm due to the solid-state dewetting process. The surface plasmon resonance (SPR) of AuNPs around 550[Formula: see text]nm was intense when the Au sputter duration exceeded 20[Formula: see text]s. Remarkably, the AuNPs layer retarded the de-oxygenation of GO during thermal annealing. The AuNPs-rGO hybrid film with long-duration Au sputtering exhibited low optical constants and thicker rGO film. The AuNPs also played the role in lowering the bandgap, increasing the lattice disorder and assisting the high-energy photon absorption in the thermally reduced rGO film. The sample of 30[Formula: see text]s and 40[Formula: see text]s Au sputtering was optimum to obtain the lowest sheet resistance of 59[Formula: see text]k[Formula: see text]/sq and 56[Formula: see text]k[Formula: see text]/sq, respectively. The sheet resistance was bargained between de-oxygenation retardation and doping by the AuNPs. Both samples of 30 s and 40 s Au sputtering were having a unique and satisfyingly strong absorption band around 260[Formula: see text]nm, 350[Formula: see text]nm and 555[Formula: see text]nm corresponding to [Formula: see text]* transition, [Formula: see text]* transition and SPR of AuNPs, respectively. Such properties are desirable in several applications such as a transparent electrode and optoelectronic sensor.


2018 ◽  
Vol 40 (S2) ◽  
pp. E1441-E1450 ◽  
Author(s):  
Onder Yargi ◽  
Ali Gelir ◽  
Utkan Sahinturk ◽  
Tanju Ozer ◽  
Murat Caliskan ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document