Development of Novel Transparent Radiation Shielding Glasses by BaO Doping in Waste Soda Lime Silica (SLS) Glass

In the current study, BaO was doped in Bi2O3-ZnO-B2O3-SLS glass to develop lead-free radiation shielding glasses and to solve the dark brown of bismuth glass. The melt-quenching method was utilized to fabricate (x) BaO (1 − x)[0.3 ZnO 0.2 Bi2O3 0.2 B2O3 0.3 SLS] (where x are 0.01, 0.02, 0.03, 0.04, and 0.05 mol) at 1200 °C. Soda lime silica glass waste (SLS), which is mostly composed of 74.1% SiO2, was used to obtain SiO2. The mass attenuation coefficient (μm) was investigated utilizing X-ray fluorescence (XRF) at 16.61, 17.74, 21.17, and 25.27 keV and narrow beam geometry at 59.54, 662, and 1333 keV. Moreover, the other parameters related to gamma ray shielding properties such as half-value layer (HVL), mean free path (MFP), and effective atomic number (Zeff) were computed depending on μm values. The results indicated that HVL and MFP decreased, whereas μm increased with an increase in BaO concentration. According to these results, it can be concluded that BaO doped in Bi2O3-ZnO-B2O3-SLS glass is a nontoxic, transparent to visible light, and a good shielding material against radiation.

Compositional Effects on Indentation Mechanical Properties of Chemically Strengthened TiO2-Doped Soda Lime Silicate Glasses

TiO2 is an important oxide for property modifications in the conventional soda lime silicate glass family. It offers interesting optical and mechanical properties, for instance, by substituting heavy metals such as lead in consumer glasses. The compositional effects on the hardness, reduced elastic modulus and crack resistance as determined by indentation of chemically strengthened (CS) TiO2-doped soda lime silicate glass was studied in the current paper. The CS, which was performed by a K+ for Na+ ion exchange in a molten KNO3 salt bath at 450 °C for 15 h, yielded significant changes in the indentation mechanical properties. The hardness of the glass samples increased, and this was notably dependent on the SiO2, CaO and TiO2 content. The reduced elastic modulus was less affected by the CS but showed decrease for most samples. The crack resistance, an important property in many applications where glasses are subjected to contact damage, showed very different behaviors among the series. Only one of the series did significantly improve the crack resistance where low CaO content, high TiO2 content, high molar volume and increased elastic deformation favored an increased crack resistance.

Diffusion in Metallic Glasses and in Oxide Glasses - An Overview

We remind the reader to some common features of metallic and oxide glasses. We then introduce the radiotracer method for diffusion studies, which can be applied for both types of glasses. We provide an overview on diffusion in metallic glasses in which we consider both types of metallic glasses – conventional and bulk metallic glasses. In the last part we discuss diffusion and ionic conduction in oxide glasses. For ionic glasses, conductivity measurements are an important complement to tracer diffusion studies. We remind the reader to the method of impedance spectroscopy. We discuss results for soda-lime silicate glasses, single alkali borate glasses and mixed alkali borate glasses and present evidence for collective jump processes in glasses.

Comparative studies on the morphological, structural and optical properties of NiO thin films grown by vacuum and non-vacuum deposition techniques

The structural and optical characteristics of Nickel oxide thin films (NiOTF) formed on the soda-lime glass substrate (SLG) under vacuum and non-vacuum conditions are investigated in this work. The difference between RFMS (Radio Frequency Magnetron Sputtering; vacuum) and SP (spray pyrolysis; non-vacuum) was helpful in the development of NiOTF. Deposited films data for this study were characterized by using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), scanning probe microscopy (SPM), and optical spectrophotometer. Structural studies disclosed that NiOTF developed via RFMS technique was more uniform with large crystals and lower surface roughness in contrast to that of developed via SP technique. Transmittance spectrum divulged that the transmittance of spray pyrolyzed NiO films are ~10% less than that of ones produced by RFMS. Urbach energy analysis of NiOTF developed by RFMS and SP affirmed the findings of structural studies.

Teardrops at the Lake: Chemistry of New Kingdom to Makuria Glass Beads and Pendants Between the First and Second Nile Cataracts

International expeditions extensively excavated Lower Nubia (between the First and Second Nile Cataracts) before it was submerged under the waters of Lake Nasser and Lake Nubia. The expeditions concentrated on monumental architecture and cemeteries, including sites at Qustul and Serra East, where the New Kingdom, and Napatan, Meroitic, Nobadian, and Makurian-period elites and common people were buried, ca. 1400 BC–AD 1400. Although the finds abound in adornments, including bead imports from Egypt and South India/Sri Lanka, only a few traces of local glass bead-making have been recorded in Nubia so far. Based on results of laser ablation–inductively coupled plasma–mass spectrometry (LA-ICP-MS) analysis of 76 glass beads, pendants, and chunks from Qustul and Serra East contexts, dated between the New Kingdom and the Makuria Kingdom periods, this paper discusses the composition and provenance of two types of plant-ash soda-lime (v-Na-Ca) glass, two types of mineral soda-lime glass (m-Na-Ca), and two types of mineral-soda-high alumina (m-Na-Al) glass. It also presents the remains of a probable local glass bead-making workshop dated to the period of intensive long-distance bead trade in Northeast Africa, AD 400–600.

SIGHT-GLASS DEGRADATION IN UREA CARBAMATE SOLUTION

In the industrial environment, a sight glass acts as a gauge for the fluid level in a pressure vessel. Sight glass must have the following physical properties: clarity (clear enough to view the fluid in the vessel), hardness (not easily broken), thermal shock resistance, and corrosion resistance. A historical investigation of the equipment placed in the High-Pressure Decomposer (HPD) unit of the Urea Plant-X and Plant-Y has a pressure of 17 Bar and a temperature of 124-155oC, yielded an analysis of sight glass degradation in carbamate solution. The sight glass that was installed is soda-lime fused glass. The average is based on the equipment's history.

Hydrometallurgical Treatment for the Extraction and Separation of Indium and Gallium from End-of-Life CIGS Photovoltaic Panels

This study presents experimental results for the development of a process for the recovery of indium and gallium from EoL CIGS (CuGa1−xInxSe2) panels. The process consists of a thermal treatment of the panels, followed by a hydrometallurgical treatment, where quantitative leaching of In, Ga, Mo, Cu and Zn is achieved. The elements are subsequently separated and recovered from the leachate by solvent extraction. For the development of the process, samples of EoL CIGS PV panels were used, which contained a thin film of Mo (metal base electrode), sputtered on the supporting soda-lime glass and covered by the thin film containing In, Ga, Cu and Se (1 μm). These films were detected by SEM-EDS in polished sections. The thermal treatment at 550 °C for 15 min, in excess of air, led to the successful disintegration of ethyl vinyl acetate (EVA) and delamination of the thin film-coated glass from the front protective glass. The glass fragments coated by the thin film contained the following: Se: 0.03–0.05%; In: 0.02%; Cu: 0.05%; Ga: 0.004–0.006%; and Mo: 0.04%. Following thermal treatment, thin film-coated glass fragments of about 1.5 cm × 1.5 cm were used in acid leaching experiments using HNO3, HCl and H2SO4. Quantitative leaching of Cu, Ga, In, Mo, Zn and Cu was achieved by HNO3 at ambient temperature. The effects of pulp density and acid concentration on the efficiency of metal leaching were investigated. Part of Se volatilized during the thermal treatment, whereas the rest was insoluble and separated from the solution by filtration. Finally, the separation of the elements was achieved via solvent extraction by D2EHPA.