Thermal shock effects on the mechanical behavior of granite exposed to dynamic loading

2020 ◽  
Vol 20 (3) ◽  
Author(s):  
Xiang Li ◽  
Baijin Li ◽  
Xibing Li ◽  
Tubing Yin ◽  
Yan Wang ◽  
...  
Keyword(s):  
Mechanical Behavior ◽  
Thermal Shock ◽  
Dynamic Loading

scholarly journals A numerical and experimental study on the tensile behavior of plasma shocked granite under dynamic loading

2017 ◽  
Vol 50 (2) ◽  
pp. 41-62
Author(s):  
Ahmad Mardoukhi ◽  
Timo Saksala ◽  
Mikko Hokka ◽  
Veli-Tapani Kuokkala
Keyword(s):  
Experimental Study ◽  
Tensile Strength ◽  
Mechanical Behavior ◽  
Thermal Shock ◽  
Dynamic Loading ◽  
Split Hopkinson Pressure Bar ◽  
Tensile Behavior ◽  
Brazilian Disc ◽  
Brazilian Disc Test ◽  
Plasma Shock

This paper presents a numerical and experimental study on the mechanical behavior of plasma shocked rock. The dynamic tensile behavior of plasma shock treated Balmoral Red granite was studied under dynamic loading using the Brazilian disc test and the Split Hopkinson Pressure Bar device. Different heat shocks were produced on the Brazilian disc samples by moving the plasma gun over the sample at different speeds. Microscopy clearly showed that as the duration of the thermal shock increases, the number of the surface cracks and their complexity increases (quantified here as the fractal dimension of the crack patterns) and the area of the damaged surface grows larger as well. At the highest thermal shock duration of 0.80 seconds the tensile strength of the Brazilian disc sample drops by approximately 20%. In the numerical simulations of the dynamic Brazilian disc test, this decrease in tensile strength was reproduced by modeling the plasma shock induced damage using the embedded discontinuity finite element method. The damage caused by the plasma shock was modeled by two methods, namely by pre-embedded discontinuity populations with zero strength and by assuming that the rock strength is lowered and conform to the Weibull distribution. This paper presents a quantitative assessment of the effects of the heat shock, the surface microstructure and mechanical behavior of the studied rock, and a promising numerical model to account for the pre-existing crack distributions in a rock material.

Dynamic Behavior of Metals Under Tensile Impact—Part 1: Elevated Temperature Tests

1970 ◽  
Vol 37 (3) ◽  
pp. 765-770 ◽  
Author(s):  
A. B. Schultz
Keyword(s):  
Elevated Temperature ◽  
Mechanical Behavior ◽  
Dynamic Behavior ◽  
Dynamic Loading ◽  
Elevated Temperatures ◽  
Uniaxial Tensile ◽  
Tensile Impact ◽  
Wide Range

The mechanical behavior of metals subjected to uniaxial tensile impact at elevated temperatures is reported. Tests were conducted on annealed 1100 aluminum at 200, 350, 550, and 800 deg F; annealed 2024 aluminum at 200, 450, and 600 deg; and annealed C1010 steel at 430, 700, 1050, and 1400 deg F. The materials exhibit a wide range of dynamic behavior, including some in which the stress required to produce a given level of strain is significantly lowered by dynamic loading. The ratios of the dynamic ultimate stresses to the static are found to range from 0.71–6.0.

Computer simulation of the relation between mechanical behavior and structural evolution of oxide ceramics under dynamic loading

2009 ◽  
Vol 52 (12) ◽  
pp. 1300-1308 ◽  
Author(s):  
V. A. Skripnyak ◽  
E. G. Skripnyak ◽  
A. A. Kozulin ◽  
V. V. Skripnyak ◽  
M. V. Korobenkov
Keyword(s):  
Computer Simulation ◽  
Mechanical Behavior ◽  
Dynamic Loading ◽  
Structural Evolution ◽  
Oxide Ceramics
Sign in / Sign up

Export Citation Format

Share Document