Void formation in ductile fracture of a cobalt-iron alloy

1961 ◽  
Vol 9 (1) ◽  
pp. 68-71 ◽  
Author(s):  
C.W. Chen
Keyword(s):  
Ductile Fracture ◽  
Void Formation ◽  
Iron Alloy ◽  
Cobalt Iron

AMPCOLOY 570

Alloy Digest ◽  
1980 ◽  
Vol 29 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Cast Iron ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Aluminum ◽  
High Quality ◽  
Glass Making ◽  
Temperature Performance ◽  
Wide Range ◽  
Cobalt Iron

Abstract AMPCOLOY 570 is a cast copper-nickel-aluminum-cobalt-iron alloy specially developed for applications involving severe stresses and high temperatures, such as glass-making molds and plate-glass rolls. It is significantly superior to cast iron which has been commonly used for glass-making molds. Good foundry techniques will yield high-quality castings of Ampcoloy 570 in a wide range of section sizes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-392. Producer or source: Ampco Metal Inc..

ELECTROCHEMICAL BEHAVIOR OF ELECTRODEPOSITED NANOCRYSTALLINE COBALT-IRON ALLOY COATING IN DIFFERENT PH

2015 ◽  
Vol 76 (10) ◽  
Author(s):  
Nik Rozlin Nik Mohd Masdek ◽  
Akram Alfantazi
Keyword(s):  
Dissolution Rate ◽  
Electrochemical Behavior ◽  
Iron Alloy ◽  
Alloy Coating ◽  
Sodium Sulphate ◽  
Basic Medium ◽  
Anodic Reaction ◽  
Cobalt Iron ◽  
Sulphide Ions ◽  
Basic Solutions

The electrochemical behavior of a cobalt-iron (CoFe) alloy electrode in 0.1 M Na2SO4 (sodium sulphate) aqueous solution of different pH was investigated. The presence of a different concentration of dissolved sulphide ions with different pH on the corrosion of electrodeposited cobalt-iron was investigated using the EQCM technique. The corrosion rates of the alloys in acidic solutions are pronouncedly high, compared to those measured in neutral or basic solutions. The presence of sulphide ions accelerates markedly the anodic reaction for all deposits in the basic medium. The dissolution rate was twice two times faster when S2− was added. By employing the EQCM, it was observed that the mass decrease or dissolution rate was significant with an increase in pH concentration. 

scholarly journals Effect of Martensite Volume Fraction on Void Formation Leading to Ductile Fracture in Dual Phase Steels

2014 ◽  
Vol 54 (4) ◽  
pp. 938-944 ◽  
Author(s):  
Takashi Matsuno ◽  
Daisuke Maeda ◽  
Hiroshi Shutoh ◽  
Akihiro Uenishi ◽  
Masayoshi Suehiro
Keyword(s):  
Ductile Fracture ◽  
Volume Fraction ◽  
Void Formation ◽  
Dual Phase ◽  
Dual Phase Steels ◽  
Martensite Volume Fraction

INCONEL ALLOY 783

Alloy Digest ◽  
2004 ◽  
Vol 53 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Iron Alloy ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Nickel Cobalt ◽  
Three Phase ◽  
Cobalt Iron ◽  
Aging Alloy ◽  
Oxidation Resistant ◽  
Clearance Control

Abstract Inconel Alloy 783 is an oxidation resistant, low expansion, nickel-cobalt-iron alloy with other additions. The alloy is a three-phase aging alloy that is of interest for close clearance control components in the aerospace arena. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: CO-95. Producer or source: Special Metals Corporation. Originally published January 1995, revised February 2004.

Czochralski pulling of cobalt and of cobalt-rich cobalt/iron alloy crystals

1975 ◽  
Vol 30 (3) ◽  
pp. 327-334 ◽  
Author(s):  
K.J. Bachmann ◽  
T. Wakiyama
Keyword(s):  
Iron Alloy ◽  
Cobalt Iron
Sign in / Sign up

Export Citation Format

Share Document