On the calculation of the energy-equivalent continuous sound level traffic noise from a street. (Zur berechnung des energie-aquivalenten dauerschallpegels der verkehrsgerausche von einer strasse). (in German)

1970 ◽  
Vol 1 (4) ◽  
pp. 247
Author(s):  
Jan Felcyn

Abstract Purpose Road traffic noise is the most common source of noise in modern cities. The noise indicators used to manage noise do not take into account its temporal structure. However, in cities the traffic flow varies during the day, peaking due to congestion and more fluent periods. In this research we sought to analyze how people (giving answers on a numerical ICBEN scale) perceive noise stimuli with the same LAeqT values but different time structures (more/less noise events, different amplitude envelopes). Methods 31 people with normal hearing took part in an experiment conducted in an anechoic chamber. Participants listened to 18 different noise recordings and rated each of them using the numerical ICBEN scale regarding noise annoyance. Results The results showed that only sound level was a statistically significant factor. However, based on people’s remarks about noise, we can also say that the more intermittent the noise is, the more negative feelings it evokes in people. Conclusions Time structure does not have a significant influence on people’s judgments about noise annoyance. However, people tend to have a preference for a steady noise rather than an intermittent one.


2018 ◽  
Vol 250 ◽  
pp. 02006
Author(s):  
Zaiton Haron ◽  
Darus Nadirah ◽  
Supandi Mohamad Afif ◽  
Yahya Khairulzan ◽  
Nordiana Mashros ◽  
...  

Transverse rumble strips (TRS) are commonly being installed to alert the drivers through sound and vibration effects. The sound produced affects the existing traffic noise level which caused noise annoyance to the nearby residents. This study aims to assess the traffic noise due to TRS at residential areas by determining the roadside noise levels, traffic and road characteristics and evaluating the relationship between these parameters. Middle overlapped (MO), middle layer overlapped (MLO) and raised rumbler (RR) TRS profiles with same thickness were selected. The measurements of roadside noise levels and skid resistance were conducted using sound level meter (SLM) and British pendulum tester (BPT) respectively. Traffic characteristics were evaluated using previous data measured using automatic traffic counter (ATC). In overall, MLO produced highest roadside noise levels with increase of 20.5dBA from baseline. Generally, the increase of roadside noise level due to TRS is strong with speed, weak to medium with skid resistance of TRS and no relationship with traffic volume. Based on three TRS profile types, MLO is not suitable to be installed on the roadways adjacent to the residential areas as the increase of roadside noise level is significant which is more than 5dBA compared to MO and RR.


2002 ◽  
Vol 33 (8) ◽  
pp. 16-24
Author(s):  
Jesús Alba Fernández ◽  
Marcelino Ferri García ◽  
Jaime Ramis Soriano ◽  
Juan Antonio Martínez Mora

In environmental acoustics the knowledge of the time dependency of the sound level provides relevant information about a sound event. In this sense, it may be said that conventional sound level metres have frequently implemented programs to calculate the fractiles (percentiles) of the distribution of instantaneous sound levels; and there are several indexes to evaluate the noise pollution, based on different statistical parameters. For further analysis of sound, and to obtain the commented indexes, it is accepted that this distribution is normal or gaussian. The questions we've tried to solve in this work are the following: First of all, whether the time dependent distribution of the variable sound pressure level should be considered as Gaussian in general cases or only in some particular ones. On the other hand, we have studied how the frequency of the sampling affects the resulting distribution of a given a sound event. To these ends, a set of road traffic noise events has been evaluated. Furthermore, even in gaussian distributions of sound pressure levels, the average of the distribution will not be coincident with the equivalent sound pressure level; that is the level of the average quadratic pressure. The difference between this parameter, and its dependence on the standard deviation, is studied.


2013 ◽  
Vol 723 ◽  
pp. 113-120 ◽  
Author(s):  
Jae Jun Lee ◽  
Deok Soon An ◽  
Jae Kyu Lim ◽  
Soo Ahn Kwon ◽  
Hyeon Jang Son ◽  
...  

Transverse rumble strips were commonly installed on approaches to intersections, toll plazas, and horizontal curves. The main function is to alert drivers by creating noise and vibration. This TRS has been demonstrated to be effective in reducing traffic accident due to sleeping. However, there are some disadvantages in its utilization, such as traffic noise produced by TRS. The objective of this study was to quantify the level of traffic noise; to verify the effects of speed and TRS shapes. Two types of vehicles [sedan and minivan] were driven over four different patterns of TRS and over cement concrete pavement at four different speeds. Researchers measured the produce noise at 7.5m distance with 1.2 m height from center of the vehicle lane at each test section. Results indicate that vehicle type, speed, TRS shape affects created traffic noise. The sound level of Type A was statistically highest among others.


2016 ◽  
Vol 8 (4) ◽  
pp. 425-430
Author(s):  
Tomas Astrauskas ◽  
Raimondas Grubliauskas

Speed table is an artificial road (street) surface irregularity, which is used to reduce speed of road traffic or maintain allowed speed limit in road (street) section. These measures are used to reduce risk for pedestrians by reducing speed of passing vehicles. Before speed table, vehicles usually reduce speed, after passing it, vehicles usually increase their speed and this could increase traffic noise. Measurements were carried out during the day time in L. Asanavičiūtės Street 5, Vilnius. Measurements were divided into two parts, inside the residential apartment building and in its environment. Near the speed table recorded sound level was 69 dB, inside the residential apartment building noise level was approximately 41 dB. In this paper speed table influence on traffic noise propagation in residential area is investigated. Greičio mažinimo priemonė – dirbtinis kelio (gatvės) dangos nelygumas, skirtas transporto priemonių greičiui sumažinti arba leistinam greičiui palaikyti kelio (gatvės) ruože. Šių įrenginių paskirtis yra sumažinti pavojų pėstiesiems mažinant važiuojančių automobilių greitį. Automobiliai prieš greičio mažinimo priemonę greitį sumažina, pervažiavę ją, dažniausiai vėl didina greitį, todėl transporto keliamas triukšmas gali padidėti. Tyrimai buvo atlikti dienos metu L. Asanavičiūtės g. 5, Vilniuje. Tyrimai buvo išskirti į dvi dalis: tyrimai gyvenamojo pastato viduje ir tyrimai gyvenamojo pastato aplinkoje. Triukšmo lygis prie vertikaliosios trapecinės greičio mažinimo priemonės buvo 69 dB, tiriamojo gyvenamojo pastato viduje apie 41 dB. Šiame straipsnyje yra nagrinėjama greičio vertikaliosios trapecinės greičio mažinimo priemonės įtaka transporto keliamo triukšmo sklaidai į gyvenamąją aplinką.


2019 ◽  
Vol 10 (02) ◽  
pp. 20585-20591
Author(s):  
Adrian Pradana ◽  
I Made Tamba ◽  
I Ketut Widnyana

This research was conducted to analyze the level of traffic noise in Lumintang City Park, Denpasar. The measurement method is by using a direct method that is using an integrating sound level meter that has an LTMS measurement facility, namely Leq with a measuring time every 5 seconds. The examination is carried out by measuring for 10 minutes. The measurement time is carried out during the 24 hour activity (NGO) on December 3, 2018. The measurement distance ranges from 5-10 meters from the road, with a height of 1-1.2 m from the ground level. The results of the research on the level of traffic noise in Lumintang City Park Denpasar showed the noise level that exceeded the noise level quality standards of the green open space area of 50 dB, where in the first lane the traffic noise level was 92.52 dB at L3. While the noise research in lane 2 shows that the highest traffic noise level of 85.70 dB occurs at L5. For day and night (NGO) noise levels in lane 1 amounting to 70.13 dB and lane 2 of 67.95 dB has exceeded the quality standard of green open space, so that it can cause physical and psychological disturbances for visitors to the Taman Lumintang City of Denpasar..


2021 ◽  
Vol 29 (3) ◽  
Author(s):  
Ngudi Tjahjono ◽  
Imam Hanafi ◽  
Latipun Latipun ◽  
Suyadi Suyadi

Noise due to motorized vehicles is a major problem in urban areas which can interfere with physiological and psychological health. This study aims to determine the extent of noise levels outside and inside the house around the function of different roads in Malang City, East Java, Indonesia. The study was conducted by measuring the traffic noise level using a sound level meter. Measurements were taken in the afternoon between 16.00-21.00 during the peak of heavy traffic and outside working hours when residents were already at home. Statistical Student’s t-test analysis was used to test differences in the average noise level outside and inside the house on each road function. Variance analysis was used to compare noise levels around primary arterial roads, secondary arteries, primary collectors, secondary collectors, primary local, and secondary local. From the measurement results, it is known that the noise due to motorized vehicles is 84.28 dB on average. This exceeds the threshold based on the Decree of the State Minister for the Environment Number 48 of 1996. There was a significant difference in noise level between outside and inside the house on each road function. There was no significant difference in noise level between the functions of the road segments both outside and inside the house. The results of the study concluded that the traffic noise level at 16:00 to 21:00 hours on all roads that were targeted for research exceeds the national threshold. It is recommended that the level of traffic noise around roads in the city of Malang can be reduced to minimize the negative impact on physiological and psychological health.


2021 ◽  
Vol 263 (2) ◽  
pp. 4058-4069
Author(s):  
Dayane Cristina Lima Estercio ◽  
Paulo Fernando Soares

The objective of this research is to develop a mathematical model to predict the road traffic noise level at the bus stop, to assess the level of noise that users of these urban facilities are exposed daily. To help assess the exposure and the environmental impact, sound mapping will be performed using the IMMI software. In the model, the calculation of direct paths and specular reflections and diffuse was adopted. The study was applied in three sections in the city of Maringá, Brazil. At each point, the user was simulated standing and sitting. The sound source was positioned on the axis of each strip, every five meters. In total, 5124 readings of source positions were evaluated in 84 measured points. For the validation, the Anderson-Kurze, Kang, Yang and Zhang, Bistafa and Naish model were applied, and then the t-Student test were applied. The results showed a correspondence between the developed model, the data of the measurements and the reference models in the range of 25 Hz to 10000 Hz, there was a greater variance between the models applied in the high frequencies. It is concluded that the model was able to estimate the sound level of the stretches evaluated.


2021 ◽  
Author(s):  
D. Wilson ◽  
Matthew Kamrath ◽  
Caitlin Haedrich ◽  
Daniel Breton ◽  
Carl Hart

Statistical distributions of urban noise levels are influenced by many complex phenomena, including spatial and temporal variations in the source level, multisource mixtures, propagation losses, and random fading from multipath reflections. This article provides a broad perspective on the varying impacts of these phenomena. Distributions incorporating random fading and averaging (e.g., gamma and noncentral Erlang) tend to be negatively skewed on logarithmic (decibel) axes but can be positively skewed if the fading process is strongly modulated by source power variations (e.g., compound gamma). In contrast, distributions incorporating randomly positioned sources and explicit geometric spreading [e.g., exponentially modified Gaussian (EMG)] tend to be positively skewed with exponential tails on logarithmic axes. To evaluate the suitability of the various distributions, one-third octave band sound-level data were measured at 37 locations in the North End of Boston, MA. Based on the Kullback-Leibler divergence as calculated across all of the locations and frequencies, the EMG provides the most consistently good agreement with the data, which were generally positively skewed. The compound gamma also fits the data well and even outperforms the EMG for the small minority of cases exhibiting negative skew. The lognormal provides a suitable fit in cases in which particular non-traffic noise sources dominate.


Sign in / Sign up

Export Citation Format

Share Document